BLOTZ B06-CS-100 User manual

6mm 3x3 Tower Block Foyer

B06-CS-100

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Foyer (B06-CS-100)

Remove the front piece and its rear support from

the sprue.

Glue the support to the back of the piece using the

holes / lugs provided.

Now remove the rear wall and its rear support

from the sprue.

Glue the support to the back of the piece using the

holes/lugs provided.

Take the two side walls and glue them to the

front piece (with the doors towards the front of

the model). Then attach the rear wall. Allow the

model to dry.

Take the entrance piece from the sprue.

Flip the model upside down and insert the

entrance way piece. The four lugs on it should

slot into the holes provided.

Finally remove the eight decorative strips from the

sprue and attach them to the building using the

lugs/holes provided.

6mm 3x3 Tower Block Middle

B06-CS-150

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Mid-Section (B06-CS-150)

Take two identical wall pieces and the two

support from the sprue. (check the lugs on the

sides of the walls to ensure they are the same).

Glue the one support to the back of each wall as

shown above. Leave them to dry.

Take the four ‘C’ shaped supports from the sprue

and glue each one to the bottom rear of each of

the four wall pieces as shown above. The arms of

the ‘C’ should fit between the lower windows

with the base of the ‘C’ protruding (see next pic)

Glue the four walls together as shown above. It is

easiest to do this if you have the building upside down

as shown. Leave to dry.

Take the twelve decorative strips from the sprue

and attach three to each side of the building as

shown above.

6mm 3x3 Tower Block oof

B06-MW-200

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

oof Section (B06-CS-200)

Remove the four walls and ‘C’ supports from the

sprue. Glue the supports to the back of the walls

as shown above so that they protrude from the

lower edge of the wall.

Glue each wall piece in turn to the roof piece.

Finally glue one of the decorative strips to each

side of the building as shown above.

Table of contents

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions