BLOTZ B10-CS-103 User manual

10mm / 15mm Cinema

B10-CS-103 / B15-CS-003

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

These instructions are for both the 10mm and 15mm versions of this building. The images used are of

the 10mm version.

Remove the sections for the right hand side of

the building from the sprues.

Starting with the bottom centre piece glue the walls

to the underside of the roof (as shown above). Note

the wall with the hole in it is at the front.

Take the balustrade pieces from the sprue as

shown above. Note two of these (#2 and #3)

have different size lugs at the ends. The smaller

end will sit into the side wall of the building.

Attach the balustrade starting with piece #1 then

fitting #2 and #3 in place. Then attach the side wall as

shown.

Remove the pieces shown above from the sprue

(NB: The 15mm version has 2 of the one shown

on the right).

Using the lug which extends out from the side wall to

help position them glue the uprights to the side wall

as shown ensuring they all align correctly.

The left side of the building is formed from the

pieces shown above.

Starting with piece #1 glue the walls to the underside

of the roof.

Take the balustrade pieces from the sprue as

shown above. Note one of these ( #3) has

different size lugs at the ends. The smaller end

will sit into the side wall of the building.

Attach the balustrade starting with piece #1 then

fitting #2 and #3 in place. Then attach the side wall as

shown. Note the side wall does not attach to the front

of this section (piece #2).

The central section of the building is formed from

the three pieces shown above.

Glue them together as shown. Note the slice out of

the roof is uppermost in this picture.

Glue the left side of the building to the centre as

shown.

Then attach the right hand side….

…and glue the whole structure to the base.

Remove these two pieces from the sprue.

Glue them together as shown.

Then fit them to the front of the building.

If desired glue the “Cinema” piece to the front of

the building.

The finished building.

This manual suits for next models

1

Other BLOTZ Toy manuals

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions