Acrel AGF-AE-D/200 User manual
External Meter Wiring Instruction
Interface:
Specification：
General
Model No.
AGF-AE-D/200
Rated Voltage-Line to N
120V
Rated Voltage-Line to Line
240V
Extended Voltage Range
88%~110%
AC Frequency
60Hz
Grids Supported
L1/L2/N/PE
Power Consumption
1.2W
CT Rated RMS Current
200A
Number of Supplied CTs
2
Standard Compliance
Safety
UL1741
Installation Specifications
Meter Dimensions(H*W*D)
2.13*3.45*2.05in (54.1*87.8*52mm)
CT Dimension (H×W×D)
2.76*2.15*1.54in(70.5*54.5*39mm)
Meter Weight
0.44lbs (0.2kg)
Operating Temp. Range
-30~55℃
Relative Humidity
5 - 90%
Meter Mounting Type
DIN-Rail 35mm
COMM Port
CT Input
AC Power Input
Status Indicator
Accessory List:
CT Connector
Installation and Cable Connection：
Refer to Meter Wire Diagram attached on the 3rd page for more details.
CAUTION: Make sure the power is cut off before installation.
CAUTION: The direction of CT must be the same as shown on the Wire Diagram.
1. Install one CT onto L1 and connect the CT to the Meter CT Input terminals “L1 CT” (Red wire
to “+” and black wire to “-”).
2. Install the other CT onto L2 and connect the CT to the Meter CT Input terminals “L2 CT” (Red
wire to “+” and black wire to “-”).
3. Connect Main Panel L1, L2, Neutral and Ground (PE) to the Meter AC Power Input terminals
ΦL1, ΦL2, N and Ground respectively.
4. Connect the Meter COMM Port “RS485 A+” and “RS485 B-” to the Universal PCS “RS485-1
#7” and “RS485-1 #8” respectively.
NOTE:
1. Mount the Meter solidly in the Main Panel or in a separate electrical box.
2. Use 24AWG copper wire for AC Power Input, and CAT5e (24AWG) for communication cable.
3. Two CTs are the same, although their cables are marked in different colors.
4. Refer to Terminal Disassembling Instruction attached on the 4th page to remove the wire
on the Meter CT Input terminals if needed.
5. Refer to Status Indicator Instruction attached on the 4th page for more information about
the Status LED.
6. Refer to the manual of the Meter for more information.
CT Direction
Universal PCS RS485-1 Port
RS485-1 Port
Details
L1 L2
N
Grid
L1 L2
N
Load
RS232
RS485-4 RS485-1
BCMS
N
L1 L2
PE
M
AGF-AE-D/200
Acrel
G
B-
A+ - + - +
L2 CT L1 CT
RS485
L2
L1
N
RS485-A
RS485-B
φL1φL2 N
Grid
Main Panel
L1
L2
Comm
N
Universal PCS
Meter Wire Diagram
Terminal Disassembling Instruction:
Step One Step Two Step Three
Status Indicator Instruction:
Indicator
Description
Troubleshooting
RUN
Blinking Green: Running normally
Solid Red＞3s: Internal fault
Replace the Meter
Blinking Yellow: No communication
L1/L2
Solid Green＞3s: No Current
Blinking Green: Positive power
Blinking Red: Negative power
Blinking Red & Green: High voltage＞130V
Blinking Red & Yellow: Low voltage＜70V
Blinking Yellow: Low voltage＜30V
Solid Yellow＞3s: Frequency abnormal,＜45Hz or＞70Hz
Choose Meter-Zero on the APP:
NOTE: Unless limits of battery power, the system starts to track the load on the meter.
Other Acrel Measuring Instrument manuals
Acrel
Acrel AMC Series Owner's manual
Acrel
Acrel AID120 User manual
Acrel
Acrel ADW310 Quick guide
Acrel
Acrel GGF Series User manual
Acrel
Acrel ARTM-Pn User manual
Acrel
Acrel ADL400 Owner's manual
Acrel
Acrel DJSF1352-RN Owner's manual
Acrel
Acrel APM Series Owner's manual
Acrel
Acrel AIM-R100 User manual
Acrel
Acrel APM830 Owner's manual
Acrel
Acrel ADL400 Owner's manual
Acrel
Acrel ADL3000-E Owner's manual
Acrel
Acrel ADL200 User manual
Acrel
Acrel AMC16-DETT Use and care manual
Acrel
Acrel AIM-T500L Series User manual
Acrel
Acrel ADL400 Owner's manual
Acrel
Acrel ADW310 Guide
Acrel
Acrel AID120 User manual
Acrel
Acrel ADL400 Owner's manual
Acrel
Acrel AMC Series Owner's manual
