Zennio MAXinBOX 16 Plus Guide

Technical Documentation

d MAXinBOX 16 Plus

MAXinBOX 16 Plus. Multi-Function Actuator 16 outputs 16A

ZIO-MB16P Technical Documentation

FEATURES

8 different channels:

oShutter channels (up to 8).

oIndividual outputs (up to 16).

o2-pipes Fan Coil control (up to 4 units).

Manual output operation with push button and

LED status indicator.

Suitable for capacitive loads, maximum 140 µF.

Logical functions included.

Output timing facilities.

Total data saving on power failure.

Size 90 x 60 x 140 mm (8 DIN units).

DIN rail unit assembly (EN 50022), with snap fit

clamp.

No external power supply required other than the

bus.

KNX BCU integrated.

Possibility to connect different phases in adjoining

outputs.

CE directives compliant.

Figure 1. MAXinBOX 16 Plus

1. Upper outputs

2. Lower

outputs

3.Programming/Test

LED

4.KNX

connector

5.Programming/Test

button

6.Output control

button

7.Output status LED

indicator

Programming/test button: short button press to set

programming mode. If this button is held while plugging the

device into the KNX bus, it goes into safe mode. If this button is

held more than 3 seconds, the device goes into manual mode

(test mode).

LED: programming mode indicator (red). When the device

goes into safe mode, it blinks (red) every half second. It lights

in green when the device is in manual mode. During start up

(after reset or power failure), if the device is not in safe mode,

programming LED blinks in blue for a few seconds.

GENERAL SYSTEM SPECIFICATIONS

CONCEPT

DESCRIPTION

Type of device

Electric operation control device

KNX

supply

Voltage (typical)

29VDC SELV

Voltage range

21…31V DC

Maximum

consumption

Voltage

29VDC (typical)

320

24VDC

12.5

300

Starting

725

Bus connection

Typical bus connector TP1, 0.50 mm² section

External power supply

Ambient temperature

0ºC to +55ºC

Storage temperature

-20ºC to +70ºC

Ambient humidity

5 to 95% RH (no condensation)

Storage humidity (relative)

5 to 95% RH (no condensation)

Complementary characteristics

Class B

Safety class

Operation type

Continuous operation

Device action type

Type 1

Electrical solicitations period

Long

Type of protection

IP20, clean environment

Assembly

Independent control assembly device to be mounted inside of electrical panels

with DIN rail (EN 50022).

Power failure response

Data saving and relay status change according to parameterization.

Response when restarting

Data recovering and output status change according to parameterization

Operation indication

Programming LED indicates programming mode (red) and test mode (green).

Output status LED indicators reflect current output state.

Weight

525 gr.

PCB CTI index

175 V

Enclosure

PC FR V0 halogen free

Technical Documentation

SAFETY INSTRUCTIONS

Installation should only be performed by qualified electricians following applicable regulations on preventing accidents, as

required by law

Do not connect Mains Voltage (230 V) or any other external voltages to any point of the bus.

Connecting an external voltage might put the entire KNX system at risk.

Make sure during the installation that there is always sufficient insulation between the mains voltage 230V and the bus or

the extension inputs.

Once the device is installed, the output terminal should not be accessible.

OUTPUTS SPECIFICATIONS AND CONNECTIONS

Contact type

Potential Free outputs through bistable relays with tungsten pre-contact.

Disconnection type

Micro-disconnection

Rated current by output

16(6)A * 250V AC (4000 VA) 16(6)A * 30V DC (480W)

Maximum inrush current

800A/200μs (inductive load)

165A/20ms (resistive load)

Outputs per common (channel)

1 individual output

Different phases connection

Possibility to connect different phases in adjoining outputs

Maximum current per block

40A per block

Maximum power

Resistive load

4000W

Inductive load

1500W

Connection Type

Terminal block (screw)

Recommended Cable Section

0.25 mm² a 4 mm²

Cable Type

Stranded or solid wire

Response Time

50ms

Expected life

Mechanical

3 million operations (60cpm)

Electrical

100.000 cycles (6cpm and resistive load)

WIRING AND ASSEMBLY DIAGRAMS

Figure 2. Block I wiring examples (from left to right): shutter (channel A) + individual outputs (channel B),

2 shutter channels (A and B), 4 individual outputs and 2-pipe fan coil with 3-speed fan.

Attaching MAXinBOX 16 Plus to DIN rail:

Removing MAXinBOX 16 Plus from DIN rail:

Figure 3. MAXinBOX 16 Plus DIN-rail assembly

This manual suits for next models

Table of contents

Other Zennio Controllers manuals

Zennio

Zennio IDAC User manual

Zennio

Zennio MAXinBOX FC 0-10V VALVE User manual

Zennio

Zennio MAXinBOX FC 0-10V FAN User manual

Zennio

Zennio MAXinBOX 8 Plus Guide

Zennio

Zennio MAXinBOX 16 Guide

Zennio

Zennio MAXinBOX 66 v2 Guide

Zennio

Zennio IRSC Zone User manual

Zennio

Zennio AudioInRoom ZMU-AUIR User manual

Zennio

Zennio MAXinBOX 8 Plus Guide

Zennio

Zennio ZoningBOX 6 Guide

Zennio

Zennio Tecla 55 X Sign User manual

Zennio

Zennio FANinBOX 110V 1CH Guide

Zennio

Zennio DIMinBOX 2CH ZDI-DB2C User manual

Zennio

Zennio MINiBOX 40 v3 User manual

Zennio

Zennio MINiBOX 25 Guide

Zennio

Zennio AudioInRoom User manual

Zennio

Zennio ZN1DI-RGBX4 User manual

Zennio

Zennio ACTinBOX MAX6 User manual

Zennio

Zennio MAXinBOX66 Guide

Zennio

Zennio MAXinBOX SHUTTER 4CH User manual

Zennio

Zennio ALLinBOX 1612 Guide

Zennio

Zennio ZN1VI-TPZAS User manual

Zennio

Zennio FANinBOX 230V 1CH Guide

Zennio

Zennio Roll-ZAS User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual