YASKAWA MP2300Siec User manual
MP23 iec
Hardware Manual
MP2300Siec
MP2310iec
Table of Contents
1
Table of Contents
1 Introduction
1.1 MP23iec Features - - - - - - - - - - - - - - - - - - - - - - 3
1.2 MP23iec Appearance - - - - - - - - - - - - - - - - - - - - 4
1.3 MP23iec Modules- - - - - - - - - - - - - - - - - - - - - - - 6
1.4 Dimensions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
2 Power Connections
5.1 Power Supply Connector - - - - - - - - - - - - - - - - - - - - - 9
5.2 System Connection Example (with E-Stop) - - - - - - - 11
3 Specifications
2.1 General Specifications - - - - - - - - - - - - - - - - - - - - - - 13
2.2 Product Specifications - - - - - - - - - - - - - - - - - - - - - - 14
2.3 Specifications of Controller - - - - - - - - - - - - - - - - - - - 15
4 Part Numbers
3.1 Component Model Numbers- - - - - - - - - - - - - - - - - - 17
4 Mounting
4.1 DIN Rail Method - - - - - - - - - - - - - - - - - - - - - - - - - - 19
6 EStop (RLY OUT) - MP2300Siec only
6.1 RLY OUT Connector Details- - - - - - - - - - - - - - - - - - 31
7 DIP Switches
7.1 Switch Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - 33
8 Self-Configuration
8.1 DIP Switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35
9 LED Outputs
9.1 Indicators - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 37
10 Battery
10.1 Battery Installation - - - - - - - - - - - - - - - - - - - - - - - - 39
Table of Contents
2
11 MECHATROLINK-II
11.1 MECHATROLINK-II Connectors - - - - - - - - - - - - - - 41
12 Ethernet
12.1 Ethernet Connector Details- - - - - - - - - - - - - - - - - - 45
13 MECHATROLINK-II Devices
13.1 Devices Connectable via MECHATROLINK-II - - - - 49
14 Option Cards
14.1 AI-01 (Analog Input) Module - - - - - - - - - - - - - - - - - 51
14.2 AO–01 (Analog Output) Module - - - - - - - - - - - - - - 58
14.3 DO–01 (Digital Output) Module - - - - - - - - - - - - - - - 62
14.4 LIO-01/02 Module - - - - - - - - - - - - - - - - - - - - - - - - 67
14.5 LIO-04/05 Modules - - - - - - - - - - - - - - - - - - - - - - - 77
14.6 LIO-06 Module - - - - - - - - - - - - - - - - - - - - - - - - - - 92
15 Terminal Block Kits
15.5 CBK-U-MP2A-xx - - - - - - - - - - - - - - - - - - - - - - - - 105
15.6 CBK-U-MP2B-xx - - - - - - - - - - - - - - - - - - - - - - - - 106
15.7 CBK-U-MP2C-xx - - - - - - - - - - - - - - - - - - - - - - - - 107
16 Cable Shielding, Segregation & Noise Immunity 109
17 Firmware Upgrade Procedure - - - - - - - - - - - - - - - 111
1.1 MP23iec Features
3
1 Introduction
1.1 MP23iec Features
MP2300Siec and MP2310iec are small all-in-one machine controllers.
They are characterized by the following standard features:
Deterministic motion network MECHATROLINK-II
• Controls up to 16 axes of servos or inverters supporting
MECHATROLINK-II.
• Connects up to 21 total stations including remote I/O.
• Can include 6 virtual axes.
Ethernet (100Mbps)
• EtherNet/IP
• Modbus TCP
• Allows high-speed communications with MotionWorks IEC
• Enables communication with the application program by using a touch
panel
• Enables communication with the application program from another
controller
1.2 MP23iec Appearance
1.2.1 MP2300Siec Appearance
4
1.2 MP23iec Appearance
1.2.1 MP2300Siec Appearance
The following figure shows the external appearance of the Controller
with metal fittings for attachment. The dimensions in the figure do not
include the length of metal fittings.
Battery cover
MECHATROLINK-
II
connector
(1 network, 2 ports)
DIP switch
(6 points+4 points)
Metal fittings
for attachment
LED
(8 points) MP LIO
3-pole connector
(24 VDC power supply)
Ethernet connector
with LEDs
2-pole connector
(RLY OUT)
Option slot
64 mm (2.52 in.)
130 mm(5.12 in.)
108 mm
(4.25 in.)
0001
23 Siec
0V
I/O
M-I/II
1.2 MP23iec Appearance
1.2.2 MP2310iec Appearance
5
1.2.2 MP2310iec Appearance
The following figure shows the external appearance of the Controller
100M
Ethernet
LINK
SW2
E-INIT
E-TEST ON
BATTERY
POWER
DC 0
DC24 M-I/II
RUN
ERR
BAT
SW1
RDY
ALM
MTX
STOP
SUP
INIT
CNFG
MON
TEST ON
IPTRX
MP2310iec
YASKAWA
DIP switch
(6 points+4 points)
LED
(8 points)
Battery cover
MECHATROLINK-II
connector
(1 line, 1 port)
3-pole connector
(24-V power supply)
Ethernet connector
with LED
Option Slots
1.3 MP23iec Modules
1.2.2 MP2310iec Appearance
6
1.3 MP23iec Modules
The following table shows the names and specifications of the
Controller and Option Modules.
Group Name Description Model Specifications
Option Modules
Motion
Modules
None currently supported
I/O Modules
Analog Input
Module AI-01 JAPMC-AN2300 Analog input, 8 channels
Analog Output
Module AO-01 JAPMC-AN2310 Analog output, 4 channels
Output Module DO-01 JAPMC-DO2300 64 outputs (sink mode output)
I/O Module LIO-01 JAPMC-IO2300
16 inputs, 16 outputs (sink mode
output)
1 encoder input
I/O Module LIO-02 JAPMC-IO2301
16 inputs, 16 outputs (source mode
output)
1 encoder input
I/O Module LIO-04 JAPMC-IO2303 32 inputs, 32 outputs
(sink mode output)
I/O Module LIO-05 JAPMC-IO2304 32 inputs, 32 outputs (source mode
output)
Multi-function
Option Card LIO-06 JAPMC-IO2305-E
8 digital inputs, 8 digital outputs (sink
mode), 1 analog input, 1 analog
output, 1 encoder input
1.4 Dimensions
1.4.1 MP2300Siec Controller
7
1.4 Dimensions
1.4.1 MP2300Siec Controller
/25KGE
Relay connector (2P)
Power connector (3P)
Terminating resistor
for MECHATROLINK
(attachment)
Model nameplate
DIN rail (35mm width)
(10: when DIN
rail is attached)
Units: mm
64 (42) 108
734-YE102
721-203/026-000
130
(9)
(14: when released)
1.4 Dimensions
1.4.2 MP2310iec Controller
8
1.4.2 MP2310iec Controller
* 1. The following cable-side connectors are attached to the power
connectors.
Power connector: 721-203/026-000
Note: Attachment
Handle for power connector (model: 231-131)
* These handles are used when connecting a cable to the cable-side
connector.
100M
Ethernet
LINK
RUN
ERR
BAT
SW1
SW2
RDY
ALM
MTX
STOP
SUP
INIT
CNFG
MON
TEST
E-INIT
E-TEST
ON
ON
BATTERY
POWER
DC 0V
DC24V
(4.5)
130
1214.5
(18) 108
120
111 4.5
(4.5)
111±0.2
Units: mm
121?0.2
Dimensions for mounting holes
4M4 taps
Four M4
mounting screws
Cable-end connector
(three poles)
721-203/026-000
M-I/II
IPTRX
MP2310
YASKAWA
Other manuals for MP2300Siec
1
This manual suits for next models
1
Table of contents
Other YASKAWA Controllers manuals
YASKAWA
YASKAWA JAPMC-CP3301-1-E User manual
YASKAWA
YASKAWA MP3300iec User manual
YASKAWA
YASKAWA PG-F3 User manual
YASKAWA
YASKAWA motoman NX100 User manual
YASKAWA
YASKAWA 264IF-01 User manual
YASKAWA
YASKAWA YRC1000 User manual
YASKAWA
YASKAWA PROFINET V1000 User manual
YASKAWA
YASKAWA Motoman NXC100 User manual
YASKAWA
YASKAWA CIMR-F7Z44P0 User manual
YASKAWA
YASKAWA 1000 Series User manual
YASKAWA
YASKAWA MOTOMAN FS100 User manual
YASKAWA
YASKAWA MP2100 Series User manual
YASKAWA
YASKAWA J1000 CIMR-JC series User manual
YASKAWA
YASKAWA Motoman DX200 User manual
YASKAWA
YASKAWA iQpump Configuration guide
YASKAWA
YASKAWA U1000 iQpump Drive User manual
YASKAWA
YASKAWA Motoman DX200 User manual
YASKAWA
YASKAWA PROFIBUS-DP SI-P3 User manual
YASKAWA
YASKAWA yasnac i80m User manual
YASKAWA
YASKAWA MOTIONPACK-110 Owner's manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
Airflow
Airflow Uno hab Installation and operating instructions
