YASKAWA Motoman DX200 User manual
MANUAL NO.
HW1481983
Part Number: 165837-1CD
Revision: 1
1
DX200 OPTIONS
INSTRUCTIONS
FOR PROFINET COMMUNICATIONS FUNCTION
(FOR CP1616 MADE BY Siemens)
MOTOMAN INSTRUCTIONS
Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and
retain for future reference.
MOTOMAN-- INSTRUCTIONS
DX200 INSTRUCTIONS
DX200 OPERATOR’S MANUAL (for each purpose)
DX200 MAINTENACE MANUAL
The DX200 operator’s manual above corresponds to specific usage. Be sure to use the appropriate manual.
1 of 103
ii
165837-1CD
HW1481983
ProfiNet Communications
Function
Copyright © 2016, 2013 YASKAWA America, Inc.
Terms of Use and Copyright Notice
All rights reserved. This manual is freely available as a service to
YASKAWA customers to assist in the operation of Motoman robots,
related equipment and software This manual is copyrighted property of
YASKAWA and may not be sold or redistributed in any way. You are
welcome to copy this document to your computer or mobile device for
easy access but you may not copy the PDF files to another website, blog,
cloud storage site or any other means of storing or distributing online
content.
Printed in the United States of America
First Printing, 2016
YASKAWA America, Inc.
Motoman Robotics Division
100 Automation Way
Miamisburg, OH 45342
Phone: 937-847-6200
www.motoman.com
2 of 103
iii
165837-1CD
HW1481983
ProfiNet Communications
Function
MANDATORY
• This manual explains the PROFINET board (CP1616 made by
Siemens) of the DX200 system and general operations. Read this
manual carefully and be sure to understand its contents before
handling the DX200.
• General items related to safety are listed in Chapter 1: Safety of the
DX200 Instructions. To ensure correct and safe operation, carefully
read the DX200 Instruction before reading this manual.
CAUTION
• Some drawings in this manual are shown with the protective covers
or shields removed for clarity. Be sure all covers and shields are
replaced before operating this product.
• The drawings and photos in this manual are representative
examples and differences may exist between them and the
delivered product.
• YASKAWA may modify this model without notice when necessary
due to product improvements, modifications, or changes in
specifications. If such modification is made, the manual number will
also be revised.
• If your copy of the manual is damaged or lost, contact a YASKAWA
representative to order a new copy. The representatives are listed
on the back cover. Be sure to tell the representative the manual
number listed on the front cover.
• YASKAWA is not responsible for incidents arising from unauthorized
modification of its products. Unauthorized modification voids your
product’s warranty.
3 of 103
iv
165837-1CD
HW1481983
ProfiNet Communications
Function
We suggest that you obtain and review a copy of the ANSI/RIA National
Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA
R15.06-2012). You can obtain this document from the Robotic Industries
Association (RIA) at the following address:
Robotic Industries Association
900 Victors Way
P.O. Box 3724
Ann Arbor, Michigan 48106
TEL: (734) 994-6088
FAX: (734) 994-3338
www.roboticsonline.com
Ultimately, well-trained personnel are the best safeguard against
accidents and damage that can result from improper operation of the
equipment. The customer is responsible for providing adequately trained
personnel to operate, program, and maintain the equipment. NEVER
ALLOW UNTRAINED PERSONNEL TO OPERATE, PROGRAM, OR
REPAIR THE EQUIPMENT!
We recommend approved YASKAWA training courses for all personnel
involved with the operation, programming, or repair of the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
4 of 103
v
165837-1CD
HW1481983
Notes for Safe Operation
ProfiNet Communications
Function
Notes for Safe Operation
Read this manual carefully before installation, operation, maintenance, or
inspection of the DX200.
In this manual, the Notes for Safe Operation are classified as “DANGER”,
“WARNING”, “CAUTION”, “MANDATORY”, or “PROHIBITED”.
Even items described as “CAUTION” may result in a serious accident in
some situations. At any rate, be sure to follow these important items
DANGER
Indicates an imminent hazardous
situation which, if not avoided, could
result in death or serious injury to
personnel.
WARNING
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury to
personnel.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury to
personnel and damage to
equipment. It may also be used to
alert against unsafe practices.
MANDATORY
Always be sure to follow explicitly
the items listed under this heading.
PROHIBITED
Must never be performed.
NOTE
To ensure safe and efficient operation at all times, be sure
to follow all instructions, even if not designated as
“DANGER”, “WARNING” and “CAUTION”.
5 of 103
Notes for Safe Operation
vi
165837-1CD
HW1481983
ProfiNet Communications
Function
PROHIBITED
• Do not use or keep the board in the following environmental
conditions.
– Where exposed to direct sunshine
– Where vibration or impact occurs
– Where high humidity exists
– Where a strong magnetic field exists
– Where much dust exists
– Where a sudden change in the temperature occurs
– Where corrosive gases occur
– Where condensation occurs
Improper usage of the board may damage the board.
6 of 103
vii
165837-1CD
HW1481983
Notes for Safe Operation
ProfiNet Communications
Function
WARNING
• Before operating the manipulator, check that servo power is turned
OFF when the emergency stop buttons on the front door of the
DX200 and programming pendant are pressed.
When the servo power is turned OFF, the SERVO ON LED on the
programming pendant is turned OFF.
Injury or damage to machinery may result if the emergency stop circuit
cannot stop the manipulator during an emergency. The manipulator
should not be used if the emergency stop buttons do not function.
Fig. : Emergency Stop Button
• Once the emergency stop button is released, clear the cell of all
items which could interfere with the operation of the manipulator.
Then turn the servo power ON.
Injury may result from unintentional or unexpected manipulator motion.
Fig. : Release of Emergency Stop
TURN
• Observe the following precautions when performing teaching
operations within the P-point maximum envelope of the manipulator
– Be sure to use a lockout device to the safeguarding when going
inside. Also, display the sign that the operation is being
performed inside the safeguarding and make sure no one closes
the safeguarding.
– View the manipulator from the front whenever possible.
– Always follow the predetermined operating procedure.
– Keep in mind the emergency response measures against the
manipulator’s unexpected motion toward you.
– Ensure that you have a safe place to retreat in case of
emergency.
Improper or unintended manipulator operation may result in injury.
• Confirm that no persons are present in the P-point maximum
envelope of the manipulator and that you are in a safe location
before:
– Turning ON the DX200 power
– Moving the manipulator with the programming pendant
– Running the system in the check mode
– Performing automatic operations
Injury may result if anyone enters the P-point maximum envelope of the
manipulator during operation. Always press an emergency stop button
immediately if there are problems.The emergency stop buttons are
located on the right of the front doorof the DX200 and the programming
pendant.
• Before wiring, be sure to turn OFF the power supply and put up a
warning sign, such as “DO NOT TURN ON THE POWER.”
Failure to observe this warning may result in an electric shock or an
injury.
7 of 103
Notes for Safe Operation
viii
165837-1CD
HW1481983
ProfiNet Communications
Function
WARNING
• Do not touch the inside of the panel for 5 minutes after the power is
turned OFF.
The remaining charged voltage in the capacitor may cause an electric
shock or an injury.
• Be sure to close the door and install the protection cover while the
power is turned ON.
Failure to observe this warning may result in a fire or an electric shock.
8 of 103
ix
165837-1CD
HW1481983
Notes for Safe Operation
ProfiNet Communications
Function
CAUTION
• Perform the following inspection procedures prior to conducting
manipulator teaching. If problems are found, repair them
immediately, and be sure that all other necessary processing has
been performed.
– Check for problems in manipulator movement.
– Check for damage to insulation and sheathing of external wires.
• Always return the programming pendant to the hook on the cabinet
of the DX200 after use.
The programming pendant can be damaged if it is left in the
manipulator's work area, on the floor, or near fixtures.
Read and understand the Explanation of Warning Labels in the DX200
Instructions before operating the manipulator:
• The wiring and mounting must be performed by authorized and
qualified personnel.
Failure to observe this caution may result in a fire or an electric shock.
• Make sure that there is no foreign matter such as metal chips on the
board.
In case of malfunction, etc. it may result in an injury or damage the
board.
• Make sure that there is no damage or deflection of parts on the
board.
In case of malfunction, etc. it may result in an injury or damage the
board.
• Correctly connect each cable and connector.
Failure to observe this caution may result in a fire or damage the board.
• Set the switches, etc. correctly.
Malfunction, caused by an incorrect setting, may result in an injury or
damage the board.
• Never touch the mounting surfaces of the board parts directly with
fingers.
The generated static electricity may damage the IC.
• Never touch the soldered surfaces of the board directly with fingers.
Protrusions on the soldered surface may result in an injury.
• No shock to the board.
The shock may damage the board.
9 of 103
Definition of Terms Used Often in This Manual
x
165837-1CD
HW1481983
ProfiNet Communications
Function
Definition of Terms Used Often in This Manual
The MOTOMAN is the YASKAWA industrial robot product.
The MOTOMAN usually consists of the manipulator, the controller, the
programming pendant, and supply cables.
In this manual, the equipment is designated as follows:
Descriptions of the programming pendant, buttons, and displays are
shown as follows:
Registered Trademark
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and TM are omitted.
Equipment Manual Designation
DX200 controller DX200
DX200 programming pendant Programming pendant
Cable between the manipulator and the
controller Manipulator cable
Equipment Manual Designation
Programming
Pendant Character Keys/
Symbol Keys The keys which have characters printed on
them are denoted with [ ].
ex. [ENTER]
Axis Keys/
Number Keys “Axis Keys” and “Number Keys” are generic
names for the keys for axis operation and
number input.
Keys pressed
simultaneously When two keys are to be pressed
simultaneously, the keys are shown with a “+”
sign between them, ex. [SHIFT]+[COORD]
Displays The menu displayed in the programming
pendant is denoted with { }.
ex. {JOB}
10 of 103
Other manuals for Motoman DX200
34
Table of contents
Other YASKAWA Controllers manuals
YASKAWA
YASKAWA CIMR-JA Series Installation and operation manual
YASKAWA
YASKAWA L1000A Series User manual
YASKAWA
YASKAWA Varispeed DI-16H2 User manual
YASKAWA
YASKAWA YRC1000micro User manual
YASKAWA
YASKAWA MotionSuite MP940 User manual
YASKAWA
YASKAWA MP3300iec User manual
YASKAWA
YASKAWA FSDrive-MV1000 Series User manual
YASKAWA
YASKAWA 1000 Series User manual
YASKAWA
YASKAWA 264IF-01 User manual
YASKAWA
YASKAWA Motoman DX200 User manual
YASKAWA
YASKAWA PROFINET 1000 Series User manual
YASKAWA
YASKAWA MP2200 User manual
YASKAWA
YASKAWA MOTOMAN DX100 User manual
YASKAWA
YASKAWA SI-EP3 User manual
YASKAWA
YASKAWA SMG Series User manual
YASKAWA
YASKAWA MOTOMAN FS100 User manual
YASKAWA
YASKAWA SI-ES3 User manual
YASKAWA
YASKAWA SI-EP3 User manual
YASKAWA
YASKAWA AO-A3 Guide
YASKAWA
YASKAWA GA700 User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
Airflow
Airflow Uno hab Installation and operating instructions
