Worx Landroid M User manual

INSTALLATION GUIDE

GUIDE D'INSTALLATION

GUÍA DE INSTALACIÓN

Installation guide EN P04

Guide d'installation F P20

Guía de instalación ES P36

How to install your Landroid®M

The installation of the Landroid

M is easy. Depending on the size of your garden, the entire process only

takes a short amount of time. If your are like us, you hate having to waste your precious free time mowing

your lawn. The Landroid

M will prove to be your best investment eliminating the need to mow your lawn

ever again.

You can watch the installation demo video at www.worxlandroid.com.

The Landroid®M loves to mow

It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the

size of your lawn, the Landroid

M may be programmed to operate at any time or frequency with no restrictions. It

is here to work for you.

In the box

Preparation

Tools Needed

Distance gauge

Hex key

Scissors Hammer

Landroid®MCharging base

Base ﬁxing

nails

Wire pegs

Boundary

wire reel

Owner’s manual

Warranty

statement

Installation

guide

Spare blades

Power Adaptor

Programming and

trouble shooting

guide

Landroid®M's new home-your garden

Let's start by having a closer look at Landroid®M's new home—your lawn—highlighting the areas where it

can safely go and areas it’s best for Landroid®M to avoid.

When hitting any obstacle that’s rigid, stable and taller than

6 inches—such as a wall or a fence—your Landroid®M will

simply stop and re-direct away from the obstacle.

Obstacles that can be hit

Stones that are heavy enough not to be moved by your

Landroid®M can be safely hit. However, if any stone has an

inclined surface that your Landroid®M can climb, you should

either remove it or exclude from the working area.

Stones

If your driveway is level with your lawn, without any protruding

surface, the Landroid®M can freely run over it. If you'd like the

Landroid®M to avoid it, then only a 4 inches* space between the

Boundary Wire and the driveway is needed. If it’s covered with

gravel, you should not allow the Landroid®M to travel over it,

using the distance gauge in this case, keeping a 14 inches* space

between the boundary wire and the driveway.

*This is the recommended distance. Use the provided

distance gauge to ensure proper installation.

Driveways

You certainly don’t want your Landroid®M to mow your ﬂowers,

or fall into the water. These areas should be avoided.

Flowerbeds, ponds, pools...

20°

If there are roots emerging from the ground, this area should be

avoided in order not to damage the roots.

Trees

In the case of large bumps or dips, please consider if the blades

could touch the ground; if this is the case, either make the

inclines smoother or exclude those areas from your Landroid®M’s

operation.

Depressions and bumps

Your Landroid®M has the ability to safely climb slopes up to 20°,

so just avoid anything steeper than this.

Slopes

The Upper Boundary Wire should NOT be placed on slopes

steeper than 20°.The Upper Boundary Wire should have a

distance of at least 14 inches between any obstacles.The Lower

Boundary Wire should NOT be placed on slopes steeper than

15°. The Lower Boundary Wire should have a distance of at least

18 inches between any obstacles when it is positioned on a slope

that is 15°.

Placement of Boundary Wire on slopes

Upper boundary wire

Lower boundary wire

Lower boundary

Wire

10°-20°<15°

14inches

18 inches

Marking out Landroid®M’s

territory within your garden

The charging base should be placed along a straight line-allow 6 ft

at both the front and the back. If possible, place the charging base

in the shade-batteries are better recharged in a cool place.

First of all, locate the best spot for the charging base, taking

into account where your nearest outdoor electricity socket is.

The charging base has a 50ft power cord.

NOTE: Make sure the adaptor and the electrical socket are

kept in a dry area at all times.

An island is an area that sits inside your lawn where you don't

want Landroid®M to go.The boundary wire starts from the

mowing boundary, goes straight to the island, around it and

back to the boundary as shown by the arrows on the picture.

Make sure it is on a ﬂat area, clear of any obstacles.

Your Landroid

M needs to know where to mow. This is why you have to mark its working area with a boundary wire

that will form an invisible fence.This wire will also guide your Landroid

M to its charging base.

If your neighbor also uses a Landroid

M, then you must keep

a space of at least 6ft between your Boundary Wire and your

neighbors.

Please be aware that your Landroid®M will not be able to receive

a signal from the Boundary Wire beyond the distance of 60 ft.

6ft

A forbidden area that's close to the mowing boundary should

be a part of the boundary itself, as shown in the picture.

If your lawn has two or more separate areas connected to each

other by means of a corridor, this should be at least 3 ft wide.

In the case of two islands that are close to each other, it would be

convenient to lay out the wire as illustrated above.

The Landroid®M can travel freely over the boundary wire in

between the islands and the mowing boundary.

If your lawns are not connected by a corridor that's wide enough,

then you'll have to pick your Landroid®M up and move it to the other

lawn. Landroid®M will mow this lawn no problem, but you'll have to

bring it back to the charging base when the battery runs out.

3ft

Place the Charging Base in its designated spot, without ﬁxing it

permanently. The “IN” arrow should be oriented so that it indicates

the inside of your lawn.

Pegging your boundary wire

Installation

We recommend that you ﬁrst mow the lawn where the wire is to be laid using a normal lawn mower or a

grass trimmer.This ensures that the wire is laid as close to the ground as possible so the Landroid

M does not

accidentally cut the wire. The boundary wire is powered with a very low voltage so that it is totally safe to human

beings and pets.

Feed the boundary wire through the tunnel underneath the

charging base.

Leaving about 3 ft in length of extra wire, start from the rear

of your charging base and begin pegging the wire along the

boundary. When you’ve ﬁnished laying the wire along the

boundary back to the charging base, leave another meter of

extra wire and then cut it.

3ft

Other manuals for Landroid M

Table of contents

Languages:

Popular Lawn Mower manuals by other brands

RHINO

RHINO 1958 parts manual

Wolf Garten

Wolf Garten Compact plus 40 B instruction manual

Cub Cadet

Cub Cadet LTX 1045 brochure

Craftsman

Craftsman 917.378461 owner's manual

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Operator's manual

Challenge

Challenge CH18V2 Original manual

TALEN TOOLS

TALEN TOOLS AVR HGM30 manual

DEWEZE

DEWEZE ATM-725 Operation and service manual

Weed Eater

Weed Eater 180083 owner's manual

Husqvarna

Husqvarna Poulan Pro PP185A42 Operator's manual

Better Outdoor Products

Better Outdoor Products Quick Series Operator's manual

Cub Cadet

Cub Cadet 23HP Z-Force 60 Operator's and service manual

MTD

MTD 795, 792, 791, 790 Operator's manual

Toro

Toro Groundsmaster 3505-D Service manual

Dennis

Dennis FT 610 instruction manual

AIRFORCE

AIRFORCE F-15 Gen 3 owner's manual

MTD

MTD 126-220-000 owner's guide

Toro

Toro 74806 Operator's manual