Volt VAL-2010-BBZ User manual

VOLT®Low Voltage Landscape Lighting

VOLT®Jolt Mini Brass Spotlight (Bronze)

VAL-2010-BBZ

INSTALLATION INSTRUCTIONS

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

- 1 -

VOLT®Jolt Mini Brass Spotlight (Bronze)

VAL-2010-BBZ

INSTALLATION INSTRUCTIONS

- 2 -

www.voltlighting.com

Important: Please Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2 cm)

from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

- 3 -

[email protected] • 813.978.3700

Package Contents

Product Dimensions

Install Stake

A. (1) Fixture Body

1.54”

1.58”

3.35”

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake

is ush to grade. To avoid

damage to the stake, place a

board on top of the stake while

hammering.

Note: If the ground is hard and

the stake is dicult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

VOLT®Jolt Mini Brass Spotlight (Bronze)

VAL-2010-BBZ

INSTALLATION INSTRUCTIONS

- 4 -

www.voltlighting.com

Install Fixture Body to Stake

Pass the xture wire through

the center hole of the stake.

Thread the xture body onto

the stake and hand tighten until

snug.

Fixture Body

Fixture Wire

Ground

Soil

Stake

Wire Connections

Strip both leads from the xture body. Using two wire connectors (sold

separately), connect the leads from the xture body to the main supply

cable leads.

Pigtail

Main Supply Cable

Supply Wire from

Fixture Body

Wire Connectors

- 5 -

[email protected] • 813.978.3700

Remove Glare Guard

Loosen the set screw to

remove the glare guard

from the xture body.

Fixture Body Set Screw

Glare

Guard

Install MR11 Bulb

Insert MR11 Bulb with the

correct wattage and type

marked on xture label and

secure into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket MR11 Bulb

Install Glare Guard

Place the glare guard back onto

the xture body and secure

with the previously removed set

screw. Hand tighten until snug.

Fixture Body Set Screw

Glare

Guard

VOLT®Jolt Mini Brass Spotlight (Bronze)

VAL-2010-BBZ

INSTALLATION INSTRUCTIONS

- 6 -

www.voltlighting.com

- 7 -

[email protected] • 813.978.3700

- 8 -

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VDL-6000 User manual

Volt

Volt 130 Series Operating and safety instructions

Volt

Volt VPL-1050-4-BBZ User manual

Volt

Volt VSAC-PANEL1-SBK User manual

Volt

Volt VPL- 398 User manual

Volt

Volt VSM-2407 User manual

Volt

Volt VHS-668-4-BBZ User manual

Volt

Volt VAL-1811-40-BBZ User manual

Volt

Volt 3601 Series User manual

Volt

Volt VSM-2408-0-BBZ User manual

Volt

Volt VFL-120V Series User manual

Volt

Volt VPL-3024-BBZ User manual

Volt

Volt All-Star Brass Tommy Light User manual

Volt

Volt Big Par36 Brass Black Flood User manual

Volt

Volt VPL-1039-BXX User manual

Volt

Volt VWL-55 Series Operating and safety instructions

Volt

Volt VAL-2044-L-ABK User manual

Volt

Volt VDL-600 Series User manual

Volt

Volt VFL-4007-4-BBZ User manual

Volt

Volt VHS-67 Series User manual

Volt

Volt VWL-705 User manual

Volt

Volt ShadowMaster VPL-1039 Series User manual

Volt

Volt VPL-3025 Series User manual

Volt

Volt STK-17LI Series User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions