Volt VPL-1024 User manual

VOLT®Low Voltage Landscape Lighting

VOLT® Belladonna Path & Area Light

VPL-1024

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

- 2 -

[email protected] • 813.978.3700

VOLT®Belladonna Path & Area Light

VPL-1024

INSTALLATION INSTRUCTIONS

- 3 -

Important: Please Read Before Installation

IMPORTANT SAFETY INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.voltlighting.com or call 1-813-978-3700.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Package Contents

Product Dimensions

A. (1) Fixture Body

B. (1) Stake

11.5”

8”

3.5”

26.5”

C. (1) Diuser

Parts Required

A. (1) LED Lamp

Install Stake

Board

Stake

Soil

Ground

- 4 -

www.voltlighting.com

Determine the desired location for mounting

the luminaire. Hammer the stake into the

ground until ange of stake is ush to grade.

To avoid damage to the stake, place a board on

top of the stake while hammering.

NOTE: If the ground is hard and the stake

is dicult to install, make a crosscut in the

ground using a at shovel.

INSTALLATION INSTRUCTIONS

[email protected] • 813.978.3700

VOLT®Belladonna Path & Area Light

VPL-1024

Install Fixture Body to Stake

Wire Connection

Fixture Body

Stake

Pigtail

Wireway Slot

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

- 5 -

Clear away an area in the ground at

the wireway slot on top of the stake.

Lay the luminaire pigtail into the

wireway slot and thread the coupler

at the bottom end of the xture body

onto the stake. Tighten until snug to

secure the base.

Install Lamp

Install Diuser

Insert the bulb with the correct wattage

and type marked on the xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

Remove the screws from the

shade. Attach the diuser onto

the shade and secure with the

screws previously removed.

Socket

Shade

Bulb

Diuser

Screw

Install/Replace Bulb

Please reverse Step 5 - Step 4 to expose the Bulb and replace it with the

correct wattage and type marked on the xture label. Reinstall Diuser.

IMPORTANT: LED Bulb must be protected from moisture and dust at all

times. Always reinstall diuser when moved.

- 6 -

www.voltlighting.com

[email protected] • 813.978.3700

- 7 -

- 8 -

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

www.voltlighting.com

IS-VPL-1024-ver2.pdf

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VAC-AL-GGT1-BBZ User manual

Volt

Volt VWL-7125-BBZ User manual

Volt

Volt VAL-1811-40-BBZ User manual

Volt

Volt VWL-703-BBZ User manual

Volt

Volt All-Star Brass Tommy Light User manual

Volt

Volt Top Dog Scotty VAL-1183 User manual

Volt

Volt VFL-4601-BBZ User manual

Volt

Volt VAL-9501-4036-BBZ User manual

Volt

Volt VSM-2407 User manual

Volt

Volt VWL-703 User manual

Volt

Volt Fat Boy Mini Spotlight User manual

Volt

Volt VPL-1048-4-BBZ User manual

Volt

Volt VPL-1042-4-BBZ User manual

Volt

Volt 390 Series User manual

Volt

Volt All Star Mini Twinnovator User manual

Volt

Volt VWL-55 Series Operating and safety instructions

Volt

Volt VFL-430-4-BBK User manual

Volt

Volt VPL-1019-26-4-BBZ User manual

Volt

Volt RGBW Max All-Star VAL-2045-ABK User manual

Volt

Volt VPL-1012-4-BBZ User manual

Volt

Volt 3601 Series User manual

Volt

Volt VPL-3024-BBZ User manual

Volt

Volt VAC-STK-PWR-PGR User manual

Volt

Volt Sedona VHT-306-11-BBZ User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions