Volt VPL-1002 Series User manual

VOLT®Low Voltage Landscape Lighting

Elegant Harp LED Path/Area Light

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®Elegant Harp LED Path/Area Light

VPL-1002 Series

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that is suitable for

outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm)

7. If additional lengths of low voltage cable is required, please contact www.

voltlighting.com or call 1-813-978-3700.

www.voltlighting.com

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damage shield.

SAVE THESE INSTRUCTIONS

Package Contents

Product Dimensions

A. (1) Luminaire

B. (1) Stake

customersupport@voltlighting.com • 813.978.3700

10” 8”

2”

26”

Parts Required

A. (1) Lamp (Sold Separately)

Install Stake

Determine desired location for mounting

luminaire. Hammer stake into ground until

ange of stake is ush to grade. To avoid

damage to stake, place a board on top of

stake while hammering.

NOTE: If ground is hard and stake is

difcult to install, make a crosscut in

ground using a at shovel.

Board

Stake

Soil

Ground

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT®Elegant Harp LED Path/Area Light

VPL-1002 Series

Install Luminaire to Stake

Clear away area in ground at wireway

slot in top of stake. Align the wireway

slots on base and stake. Lay luminaire

pigtail into wireway slots and thread

the nipple at the bottom end of the

luminaire body into stake. Tighten

until snug to secure base.

Wire Connection

Luminaire

Stake

Pigtail

Wireway Slot

Strip two leads from luminaire pigtail. Using two wire connectors (not

provided), connect leads from luminaire to main low voltage supply

cable leads.

Pigtail

Main Low

Voltage Supply

Cable

Wire Connectors

Remove Diffuser

Install Lamp

Install Diffuser

Remove screws from diffuser to

expose the socket.

Insert lamp with correct wattage

and type marked on luminaire

label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with

bare hands. Use soft cloth to

handle lamp.

Align screw holes on diffuser with

those on the shade. Tighten screws

to re-attach diffuser to shade.

customersupport@voltlighting.com • 813.978.3700

Shade

Socket

Shade

Diffuser

Screw

Lamp

Diffuser

Screw

Install/Replace Lamp

Please reverse Step 6 - Step 5 to expose the lamp and replace it with

correct wattage and type marked on luminaire label. Reinstall Diffuser.

IMPORTANT: Lamp must be protected from moisture and dust at all times.

Always re-install diffuser when moved.

is-VPL-1002-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt 510 Series User manual

Volt

Volt VDL-6007 User manual

Volt

Volt 2-in-1 Tiki-Brass Torch Light User manual

Volt

Volt VPL-1019-26-4-BBZ User manual

Volt

Volt VHS-605-4-FPG User manual

Volt

Volt VAL-2001 Series User manual

Volt

Volt VPL-1024 User manual

Volt

Volt VAC-AL-GGT1-BBZ User manual

Volt

Volt Top Dog Innovator VPL-398 User manual

Volt

Volt VAL-2010-BBZ User manual

Volt

Volt VAL-180 User manual

Volt

Volt VHS-650-4-BBK User manual

Volt

Volt VAL-2000-4-BBZ User manual

Volt

Volt VAL-2049-35-4-BBZ User manual

Volt

Volt 3601 Series User manual

Volt

Volt VHS-67 Series User manual

Volt

Volt VAC-STK-PWR-PGR User manual

Volt

Volt VPL-3025 Series User manual

Volt

Volt VAL-91 Series Operating and safety instructions

Volt

Volt VUL-6804-25-BBZ User manual

Volt

Volt VPL-1054 User manual

Volt

Volt VSPL-1045-BBZ User manual

Volt

Volt VPL-1042-4-BBZ User manual

Volt

Volt Top Dog Scotty Mini Twinnovator Brass User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions