Volt 3601 Series User manual

VOLT®Low Voltage Landscape Lighting

VOLT®Estate Size Path & Area Lights

3601 Series

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

VOLT®Estate Size Path & Area Lights

3601 Series

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)

in order to connect to the main low voltage cable.

5. Wiring connections must be made with UL listed wire connectors that

are suitable for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

www.voltlighting.com

- 2 -

Package Contents

Product Dimensions

A. (1) Fixture Body

[email protected] • 813.978.3700

- 3 -

10.25”

6”

3”

Estate Size Hat featured

on Estate Size Low

Voltage Stem

36”

www.voltlighting.com

INSTALLATION INSTRUCTIONS

- 4 -

Remove Stem Top

VOLT®Estate Size Path & Area Lights

3601 Series

Install Lamp

Thread the stem top onto the

stem and hand tighten until

snug.

Install Stem Top

Stem Top

Stem

Loosen the stem top and remove

it from the top end of the stem.

Stem

Stem Top

Insert the lamp with the correct

wattage and type marked on the

xture label and push rmly into

place.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

Socket

Lamp

[email protected] • 813.978.3700

- 5 -

Install Stake

Remove Cap from Stake

Dig a hole in the ground for the stake. Slide the stabilizer grid onto the

stake and secure with the screws. Place the stake and backll against

the mounting stake.

Stake

Stabilizer

Grid

Ground Level

Stake

Remove the cap from the stake

by loosening the set screws.

Set Screw

Cap

Stake

Install Cap to Base

Screw the coupler on the bottom

center of the base and then

thread the cap onto the coupler.

Base

Coupler

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

VOLT®Estate Size Path & Area Lights

3601 Series

Fixture Installation

Pass the supply wires through the

stake. Attach the cap with the

xture onto the stake and secure

with set screws. Hand tighten until

snug with a screwdriver.

Set Screw

Cap

Stake Supply Wire

Wire Connection

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

[email protected] • 813.978.3700

- 7 -

Install Hat

Place the hat of your choice onto the stem top and secure it with the nial,

or thread the hat of your choice onto the stem top directly. Hand tighten

until snug.

Stem Top

Finial

Hat of your choice

Install/Replace Lamp

Remove the nial, hat and stem top to expose the lamp and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top, hat and nial.

IMPORTANT: Lamps must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

is-3601series-ver8.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 8 -

Other manuals for 3601 Series

Table of contents

Other Volt Landscape Lighting manuals

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions