Volt VAL-180 User manual

INSTALLATION INSTRUCTIONS

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING

VOLT® Top Dog Scotty Cast Brass Spotlight

ITEM: VAL-180

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180

INSTALLATION INSTRUCTIONS

IMPORTANT: PLEASE READ BEFORE INSTALLATION

IMPORTANT SAFETY INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

This luminaire is intended for installation in accordance with local codes and the

National Electric Code (NEC). Failure to adhere to these codes and

instructions

may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation, operation

maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more

from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply (transformer)

rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located within 6

inches (15.2 cm) from a building structure, a luminaire or fitting.

6. The main low voltage cable is intended for shallow burial - less than 6 inches

(152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when

turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from

skin may damage lamp.

6. Do not operate the luminaire fitting with a missing or

damaged shield.

SAVE THESE INSTRUCTIONS

PACKAGE CONTENTS

PRODUCT DIMENSIONS

INSTALL STAKE

813.978.3700 • [email protected] • www.voltlighting.com

PRODUCT DIMENSIONS

A. (1) Fixture Body

A. Mounting Accessory

B. MR16 Lamp

5.67”

2.4”

1.0”

Determine the desired location for

mounting the stake mount. Hammer

the stake into the ground until ange

of stake is ush to grade. To avoid

damage to the stake, place a board

on top of the stake while

hammering.

Note: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel.

Board

Stake

Soil

Ground

INSTALL FIXTURE BODY TO STAKE

VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Clear away an area in the ground

at the wireway slot on top of the

stake. Lay the supply wires into

the wireway slot and attach the

xture on to the stake. Tighten

until snug.

Fixture

Body

Ground

Wireway

Slot

Stake

Supply

Wires

Wire Connection

Strip both the leads from the luminaire pigtail. Using two UL listed wire

connectors (sold separately), connect the leads from the luminaire to

the main supply cable leads.

Pigtail

Wire Connectors

Main Supply

Cable

813.978.3700 • [email protected] • www.voltlighting.com

Remove Glare Guard and Lens

Install MR16 Lamp

Install Glare Guard and Lens

Unlock the set screw and

remove the glare guard from

the lens. Unscrew the lens to

remove it from xture.

Glare Guard

Set Screw

Fixture

Lens

Insert MR16 bulb with the cor-

rect wattage and type marked

on the xture label and secure

into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket

Fixture

MR16 Lamp

Thread the lens back onto the

xture and hand tighten. Place

the glare guard back onto the

lens and secure with previously

removed set screw.

Lens

Glare Guard

Set Screw

Fixture

VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180

INSTALLATION INSTRUCTIONS

813.978.3700 • [email protected] • www.voltlighting.com

Adjust Luminaire Direction

ROTATE Loosen the adjustment screw at

the joint and adjust the

luminaire to the desired

direction. Once the desired

direction is achieved, tighten the

adjustment screw.

Adjustment Screw

Luminaire

813.978.3700 • [email protected] • www.voltlighting.com

Specications and product details subject to change without notice.

[email protected] • www.voltlighting.com

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

This manual suits for next models

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VAL-2000-4-BBZ User manual

Volt

Volt VHS-668-4-BBZ User manual

Volt

Volt VHS-6726-8-BRB User manual

Volt

Volt VPL-1001-4-BBZ User manual

Volt

Volt VPL-1002 Series User manual

Volt

Volt VSDL-6013-BBZ User manual

Volt

Volt VPL-1043-4-BBZ User manual

Volt

Volt LED Top Dog Tommy Light User manual

Volt

Volt VAL-2001 Series User manual

Volt

Volt Big Par36 Brass Black Flood User manual

Volt

Volt VPL-1012-BBZ User manual

Volt

Volt VAL-2102-0-BBZ User manual

Volt

Volt 3601 Series User manual

Volt

Volt 390 Series User manual

Volt

Volt VDL-600 Series User manual

Volt

Volt Top Dog Innovator VPL-398 User manual

Volt

Volt VPL-370 Series User manual

Volt

Volt VAL-2049-35-4-BBZ User manual

Volt

Volt VSPL-9001-25-BBZ User manual

Volt

Volt VAL-2101-0-BBZ User manual

Volt

Volt VWL-510 Series User manual

Volt

Volt VFL-4602-BBZ User manual

Volt

Volt LPL-PLKIT User manual

Volt

Volt Guardsman VPL-1011 User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions