Volt 390 Series User manual

VOLT®Low Voltage Landscape Lighting

Traditions Path & Area Light

390 Series

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm

VOLT® Traditions Path & Area Light

390 Series

Important: Please Read Before Installation

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTIONS

www.voltlighting.com

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage

lamp.

6. Do not operate the luminaire tting with a missing or damage shield.

SAVE THESE INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and in-

structions may result in serious injury, property damage and void the warranty.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing

this luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply (trans-

former) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that is suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or t-

ting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm)

7. If additional lengths of low voltage cable is required, please contact

www.voltlighting.com or call 1-813-978-3700.

customersupport@voltlighting.com • 813.978.3700

Package Contents

A. (1) Luminaire

B. (1) Tempered Glass

C. (3) Lock Ball

Product Dimensions

Install Stake

Determine desired location for mounting

luminaire. Hammer stake into ground until

ange of stake is ush to grade. To avoid dam-

age to stake, place board on top of stake while

hammering.

NOTE: If ground is hard and stake is difcult

to install, make a crosscut in ground using a

at shovel.

Board

Stake

Soil

Ground

23”

11”

51/2”

4”

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT® Traditions Path & Area Light

390 Series

Install Tempered Glass

Attach tempered glass over bolts in the

shade and secure with lock balls.

Lock Ball

Bolt

Shade

Tempered Glass

Insert lamp, sold separately, with correct wattage

and type as marked on luminaire label.

CAUTION: Do not exceed maximum wattage

marked on luminaire label.

NOTE: DO NOT TOUCH halogen lamp with

bare hands. Use soft cloth to handle lamp.

Install Lamp

Lamp

Socket

Install Luminaire to Stake

Clear away area in ground at wireway

slot in top of stake. Lay luminaire pig-

tail into wireway slot and screw stem

into stake.

If assembly does not look straight,

adjust by pushing or pulling on stake

only.

Use bubble level against side of stem

to ensure that stem is perpendicular

to ground.

Pigtail

Rod

Stake

Wireway Slot

customersupport@voltlighting.com • 813.978.3700

Wire Connections

Strip two leads from luminaire pigtail. Using two wire connectors, not

provided, connect leads from luminaire to main low voltage supply cable

lead.

Luminaire Wires

Main Low Voltage

Supply Cable

Wire Connectors

Install/Replace Lamp

Unscrew lock balls and remove tempered glass to expose lamp and replace it

with correct wattage and type marked on luminaire label. And then reinstall

tempered glass and secure with lock balls.

IMPORTANT: Halogen lamps must be protected from moisture and dust at

all times. Always re-install shade and lens when moved.

is-390-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VWL-500-4-PBK User manual

Volt

Volt VAL-2049-35-4-BBZ User manual

Volt

Volt VSAC-PANEL1-SBK User manual

Volt

Volt VPL-1048-4-BBZ User manual

Volt

Volt VHS-6720-X-BBZ User manual

Volt

Volt VPL-3024-BBZ User manual

Volt

Volt RGBW Max All-Star VAL-2045-ABK User manual

Volt

Volt VFL-4007-4-BBZ User manual

Volt

Volt VSM-2407 User manual

Volt

Volt VSPL-9001-25-BBZ User manual

Volt

Volt VFL-430-4-BBK User manual

Volt

Volt VPL-1043-4-BBZ User manual

Volt

Volt VAL-2006-4-BBZ User manual

Volt

Volt Fat Boy Mini Spotlight User manual

Volt

Volt VWL-705 User manual

Volt

Volt VPL-1002 User manual

Volt

Volt 510 Series User manual

Volt

Volt VWL-55 Series Operating and safety instructions

Volt

Volt VAC-AL-GGT1-BBZ User manual

Volt

Volt 3601 Series User manual

Volt

Volt VDL-6000 User manual

Volt

Volt VPL-1024 User manual

Volt

Volt VHS-6719-25-BBZ User manual

Volt

Volt VAL-2101-0-BBZ User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions