Volt VAL-1811-40-BBZ User manual

VOLT®Low Voltage Landscape Lighting

VOLT®Woodsman Integrated LED Downlight

VAL-1811-40-BBZ or VAL-1811-40-ABZ

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

VOLT®Woodsman Integrated LED Downlight

VAL-1811-40-BBZ or VAL-1811-40-ABZ

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage, and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 12 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)

in order to connect to the main low voltage cable.

5. Wiring connections must be made with wire connectors that is suitable

for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

www.voltlighting.com

- 2 -

Package Contents

Product Dimensions

A. (1) Fixture

B. Mounting Hardware

[email protected] • 813.978.3700

Install Fixture

9 3/4”

8 1/4”

4 1/4”

8”

- 3 -

Self-tapping

Screws

Anchor (not provided)

Fixture

Mount

Fixture

Determine your desired location

for the xture. Pass self-tapping

screws through the holes on the

xture mount and thread the

self-tapping screws into desired

location to secure the xture.

NOTE: Anchors are required for

brick walls or concrete walls.

To determine locations for

the anchors, place the mount

of xture onto your desired

location and mark the points

from holes on feet of the mount.

www.voltlighting.com

Wire Connections

Pigtail

Main Supply Cable

Wire Connectors

- 4 -

Adjust Fixture Direction

Glare Guard

Knuckle

VOLT®Woodsman Integrated LED Downlight

VAL-1811-40-BBZ or VAL-1811-40-ABZ

INSTALLATION INSTRUCTIONS

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect both leads from the luminaire to main supply

cable leads.

Loosen the knuckle set screw

and rotate the xture to the

appropriate direction. The glare

guard can also be adjusted

by loosening the thumb screw

before rotating.

[email protected] • 813.978.3700

Remove Glare Guard and Inner Shade

Replace Optic

- 5 -

Loosen the thumb screw and

remove the glare guard from

lens. Remove the lens from the

xture body by unscrewing it

counter-clockwise.

Remove plug at the center of optic.

Remove the screw, then remove

the optic from xture.

Install the new optic in the xture,

then reinstall the previously

removed screw, plug, lens, and

glare guard back onto xture.

Glare Guard

Plug

Lens

Optic

Thumb Screw

Screw

Fixture

Body

Fixture

Body

Install / Replace Optic

www.voltlighting.com

- 6 -

[email protected] • 813.978.3700

- 7 -

IS-VAL-1811-40-XXX-ver6.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 8 -

This manual suits for next models

Table of contents

Other Volt Landscape Lighting manuals

Volt

Volt VFL-450X-BBZ User manual

Volt

Volt VWL-703-BBZ User manual

Volt

Volt VSSI-2005-50-BK User manual

Volt

Volt VPL-1042-4-BBZ User manual

Volt

Volt VSPL-9001-25-BBZ User manual

Volt

Volt VPL-1012-4-BBZ User manual

Volt

Volt VPL-1041-4-BBZ User manual

Volt

Volt VPL-1024 User manual

Volt

Volt Guardsman VPL-1011 User manual

Volt

Volt VWL-510 Series User manual

Volt

Volt VDL-6008-4-BBZ User manual

Volt

Volt All-Star VAL-2000 Series User manual

Volt

Volt VPL-1043-4-BBZ User manual

Volt

Volt VPL-1002 User manual

Volt

Volt VAL-2010-BBZ User manual

Volt

Volt VPL-1044-4-BBZ User manual

Volt

Volt VFL-4001-LI-ABZ User manual

Volt

Volt VAL-180 User manual

Volt

Volt VPL-1019-26-4-BBZ User manual

Volt

Volt VDL-6007 User manual

Volt

Volt VPL-1011-4-BBZ User manual

Volt

Volt RGBW Max All-Star VAL-2045-ABK User manual

Volt

Volt VUL-6804-25-BBZ User manual

Volt

Volt VSPL-1045-BBZ User manual

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions