4
1 Important information
Safety precautions
Vibration measurement involves measurement on rotating machines. Keep a safe distance to rotating parts and
secure transducers and transducer cables from rotating parts. Always follow internal, local and national
security regulations! When working with weights on the rotor always secure the start switch with a locker and
also use the emergency switch for double safety. This is especially important when the machine is remote
controlled.
VMI takes no responsibility for any accidents on people and machines.
VMI and our authorized dealers will take no responsibility for damages on machines and plants as the result
of the use of VIBER X2 ProTM measurements.
VMI has the aim to improve and develop our work, why surely an upgraded version of this manual will be
distributed in the future. As a result of this, we might change and correct these items in later issues without
further notice. Also changes in the VIBER X2 ProTM equipment may take place that affects this information.
2 Introduction
VIBER X2 Pro™is designed for maintenance/repairer personnel. It is an excellent tool, for basic condition
monitoring checks, easy to use and reliable for status analyse. The VIBER X2 Pro™ instrument has the
following features:
Accurate measurements for 4 selectable frequency ranges. Gives high reliability.
Real-time measurement of the total vibration level and the Bearing Condition (BC) measures and
displayed simultaneously, facilitates analysis of bearing faults.
Fast and easy fault analysis screen displaying the five highest peaks with amplitude and frequency one
by one.
Measurement quantities and their units and presentation can be selected by the user from the
following list:
og-value = Acceleration (RMS, Peak or Peak-Peak)
oa = Acceleration (m/s2) (RMS, Peak or Peak-Peak)
oV = Velocity (mm/sec) (RMS, Peak or Peak-Peak)
oV = Velocity (inch/sec) (RMS, Peak or Peak-Peak)
oD = Displacement (mils) (RMS, Peak or Peak-Peak)
oD = Displacement (μm) (RMS, Peak or Peak-Peak)
Bar indicator shows measurement stability.
Bearing Condition measurements in the frequency range (0,5 –16 kHz).
Fast and easy fault analysis displaying the five highest peaks frequency in Hz or RPM in main screen
display.
Large dynamic range of the vibration signal (up to 50g).
Low power consumption.
High performance accelerometer.
Vibration, danger alarms by red and yellow colour LED’s.
Fast battery charging capacity using an external charger, provided in the delivery.
Display with backlight.
