Vivo STAND V006 User manual

Hex Monitor Desk Mount

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-Model: STAND V006

Tools Required:

phillips screwdriver

Package Contents

1

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

a (x1)

Pole

b (x1)

Clamp

c (x2)

Arm Assembly

d (x24)

M4x12

e (x24)

M4x30

(x48)

M4 Washer

g (x24)

M4 Spacer

h (x4)

M8x10

i (x2)

M10x15

j (x1)

Allen Key

k (x2)

Spare Plast c

Cover

- -https://vivo us.com/products/stand v006

l (x1)

Wrench

Assembly Steps

2

Step 1: Install the “C” Clamp According to the

Desktop Thickness

Attach pole (a) to clamp (b) at desired height with screws (i) and Allen

wrench (j). Secure clamp to desk.

Step 2: Install Arm to the Tube Support

Attach arm assembly (c) to the pole (a) with screws (h) at desired

height, making sure the cable clips are facing down. Repeat for

second arm assembly.

Step 4: Managing the Wires and Adjusting the

Turning Tension

Manage cables using the cable clips. Cables on top arm assembly can

be passed through the top of the pole and out the rear cable hole

below.

To adjust swivel joint tension, remove the plastic cover and turn the

bolt underneath with the Allen key (j).

Step 3: Mounting the Monitor to VESA Plate

Option A: Flat Back Monitor

Mount monitors to VESA plates using thumbscrews (d) and washers

(f). Do not overtighten; thumbscrews only need to be finger-tight.

Option B: Curved Back Monitor

For curved back monitors use screws (e), washers (f), and spacers (g).

3

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by incorrect

assembly or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

Sa ety Warning

Contact us at:

Last updated: 06/04/18

Step 5: Fix the Tilt Angle and Adjust the Level o

the Monitors

To adjust tilt support, remove the plastic cover and turn the nut

underneath with the wrench (l).

Turn the bolt counterclockwise to lower the center monitor, turn the

bolt clockwise to raise the center monitor.

4

Table of contents

Popular TV Mount manuals by other brands

Ergotron

Ergotron Neo Flex Cantilever UHD user guide

StarTech.com

StarTech.com FPCEILBTB user manual

VonHaus

VonHaus 05/038 instruction manual

Techlink

Techlink ECHO TV manual

Sandstrom

Sandstrom SSTVMC12X instruction manual

Sony

Sony SU-WL700 Additional information for Using

ICW

ICW SCACC18 installation instructions

LG

LG WM-L640V owner's manual

Gembird

Gembird WM-65ST-01 user manual

ERARD

ERARD FiTUP XXL 035320 quick start guide

PEERLESS

PEERLESS PLCK-1 Installation and assembly

Kanto

Kanto RCF180 user manual

GEM

GEM GEM GP001 instructions

Gladiator Joe

Gladiator Joe GJ0A0053 quick start guide

Vivotek

Vivotek AM-105 installation guide

AmazonBasics

AmazonBasics B07QG3LMG4 manual

Secura

Secura QLF210 instruction manual

Marquant

Marquant 929-083 Operating instructions in original