Vivo STAND-V002T/W User manual

Dual Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v002t

SKU: STAND-V002T/W

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

A (x2)

VESA Plate

B(x2)

Bracket

C(x1)

Clamp

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

D(x1)

Lower Pole

E(x1)

Upper Pole

F (x1)

Pole Cap

G (x1)

Pole Connector

H (x2)

Cable Clip

S-A (x3)

M6x16mm

Screw

K (x1)

Support Plate

I(x1)

Grommet

Base

J(x5)

Rubber Pad

M-A (x8)

M4x12mm

Screw

M-B (x8)

M4x16mm

Screw

M-C (x8)

M5x12mm

Screw

M-D (x8)

M5x16mm

Screw

M-E (x8)

M5 Washer

M-F (x8)

Spacer

T-A (x1)

3mm Allen Key

T-B (x1)

4mm Allen Key

T-C (x1)

6mm Allen Key

S-B (x2)

Thumbscrew

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 2

TOOLS NEEDED

Phillips

Screwdriver

OPTION A: Clamp Installation

Stick Rubber Pads (J) to the underside of Clamp (C). Attach Lower Pole (D) to Clamp (C) using

M6x16mm Screws (S-A). Tighten using 4mm Allen Wrench (T-B). Attach Clamp (C) to desktop.

STEP 1

Attach Pole Cap (F) to top of Upper Pole (E).

10-88mm

22 lbs

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

S-A

T-B

STEP 2 (Continued)

OPTION B: Grommet Base Installation

For grommet hole mounting, remove screw in top of bolt on Clamp (C). Stick Rubber Pads (J) to

bottom of Grommet Base (I). Attach Support Plate (K) to bolt and run through grommet hole into

Grommet Base (I) and thread into Lower Pole (D) as shown in diagram.

STEP 3

Slide Cable Clip (H) and Bracket (B) onto Lower Pole (D) and tighten using 6mm Allen Wrench (T-C).

10-75mm

T-C

STEP 4

Attach Upper Pole (E) to Lower Pole (D) using Pole Connector (G). Tighten grub screws in pole

connector using 3mm Allen Wrench (T-A). Slide remaining Cable Clup (H) and Bracket (B) onto Upper

Pole (E) and tighten using 6mm Allen Wrench (T-C).

STEP 5

OPTION A: Flat Back Monitor

Attach VESA Plates (A) to back of monitors using appropriate Screws (M-A, M-C) and Washers (M-E).

M- A

M- C

M- E

T-A

T-C

STEP 5 (Continued)

STEP 6

OPTION B: Curved Back Monitor

Attach VESA Plates (A) to back of monitors using appropriate Screws (M-B or M-D). If screws are too

long, Spacers (M-F) may be required.

Slide VESA Plates (A) into Brackets (B) and secure using Thumb Screws (S-B) as shown in diagram.

STEP 7

Adjust tension in monitor bracket with 6mm Allen Wrench (T-C).

M- B

M- D

M- E

M- F

S-B

T-C

STEP 8

Run cables through Cable Clips (H).

STEP 9

Store Allen Wrenches (T-A, T-B, T-C) in cable management clips (H) for future adjustments.

Adjust as Desired

180°

360°

+45°

-45°

+45°

-45°

T-A

T-B

T-C

LAST UPDATED: 03/24/2023

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular TV Mount manuals by other brands

Ergotron

Ergotron Neo Flex Cantilever UHD user guide

StarTech.com

StarTech.com FPCEILBTB user manual

VonHaus

VonHaus 05/038 instruction manual

Techlink

Techlink ECHO TV manual

Sandstrom

Sandstrom SSTVMC12X instruction manual

Sony

Sony SU-WL700 Additional information for Using

ICW

ICW SCACC18 installation instructions

LG WM-L640V owner's manual

Gembird

Gembird WM-65ST-01 user manual

ERARD

ERARD FiTUP XXL 035320 quick start guide

PEERLESS

PEERLESS PLCK-1 Installation and assembly

Kanto

Kanto RCF180 user manual

GEM

GEM GEM GP001 instructions

Gladiator Joe

Gladiator Joe GJ0A0053 quick start guide

Vivotek

Vivotek AM-105 installation guide

AmazonBasics

AmazonBasics B07QG3LMG4 manual

Secura

Secura QLF210 instruction manual

Marquant

Marquant 929-083 Operating instructions in original