Vivo STAND-V032M User manual

Dual Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v032m

SKU: STAND-V032M

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Arm

B(x1)

Pole

C(x1)

Clamp

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

D(x1)

Grommet

Base Plate

E(x6)

Wire Clip

F (x1)

Cable Clip

G (x1)

Pole Cover

H (x5)

Rubber Pad

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

I(x1)

Support Plate

J(x1)

3mm Allen Key

M-A (x8)

M4X12

M-B (x8)

M5x12

M-C (X8)

D5 Washer

L(x1)

6mm Allen Key

K(x1)

5mm Allen Key

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

Phillips

Screwdriver

OPTION A: Clamp Installation

Screw pole (B) into clamp base

(C), and tighten the two set

screws with Allen key (J). Apply

feet (H) to bottom of clamp

base (C). Attach cover (G) and

cable clip (F) to base and pole

assembly. Secure clamp to desk

using hand bolt.

OPTION B: Grommet Base Installation

Remove hand bolt from clamp (C) by

first removing Phillips screw from the

top of the bolt, then remove the plate

and unscrew the bolt. Apply feet (H)

to bottom of grommet base (D). Screw

pole (B) into base, and tighten the two

set screws with Allen key (J). Attach

cover (G) and cable clip (F) to base and

pole assembly. Mount grommet base

to desk using grommet plate (I) and

previously removed hand bolt.

10-8 8 mm

10-88mm

17.6lbs

(8 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

STEP 2

Slide arms (A) onto pole, and tighten with Allen key (K).

STEP 3

Attach cable clips (E) to arms.

STEP 4

Insert (M-A or M-B) screws and (M-C) washers into top two holes of monitor, leaving 3mm of thread

visible. Hang monitor over open slots in VESA plate, and secure with two more screws and washers in

bottom holes.

STEP 5

Adjust monitor tilt support using Allen key (L).

M- A

M- B

M- C

3m m

M- A

M- B

M- C

+45°

-45°

STEP 6

Store Allen keys (K,L) in cable clip for quick access.

STEP 7

Turn bolts behind VESA plates using Allen key (K) to adjust height and align monitors. Manage cables.

360°

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 