Vivo STAND-V002D User manual

Dua Monito Des Mount

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-Mode STAND V002D

Toos Requied

phillips screwdriver

Pacage Contents

1

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

A (x1) B (x1) C (x1)

D (x1) E (x1) F (x1) (x1)

H (x5) I (x1) J (x1)

4mm

K (x1)

5mm

-M C (x4)

D5

-M A (x4)

M4x12

- M B (x4)

M5x12

x2

- -https//vivo us.com/poducts/stand v002d

Assemb- Steps

2

Step 1

-1a 1

Install the clamp base support (B) onto the base

of the monitor stand (A) with bolts (H) using

provided 4mm Allen wrench (J).

-1a 2a

Secure clamp (C) to upper two holes

with bolts (H) using 4mm Allen wrench

(J) for desk with a thickness of 10-

mm.

-1a 2b

Secure clamp (C ) to upper two holes with

bolts (H) using 4mm Allen wrench (J) for

desk with a thickness of 10-8 mm.

-1a 3

Attach cover (D) to base support.

Step 1 (Continued)

Tighten the clamp to the desktop

using the plastic knob.

-1a 4

-1b 1

Slide the long screw (E)

through the top of the

grommet base support (F) and

install on base of monitor

stand with bolts (H) using 4mm

Allen wrench (J).

-1b 2

Position stand on desk with

long screw through hole, and

secure by using the support

plate (I) and clamp knob (G) on

underside of the mounting

surface. NOTE: For self-drilled

installation, drill an 8. mm hole

or larger through the

mounting surface.

Step 4

Remove cables covers as shown from upper and lower arms.

Step 5

Replace covers making sure the cables have enough slack to

allow for free movement of the arms.

Step 2

Step 3

Adjust gas spring tension by turning screw with mm Allen wrench (K). Clockwise

reduces tension, counter-clockwise increases tension. The tension should be just

enough to hold your monitor in place without lifting itself up. If needed, adjust the

bolt on the side of the hinge behind the VESA plate to tighten or loosen the tilt angle

support.

Insert screws (M-A or M-B) with washers (C) into top two holes of monitor, leaving

3mm of thread exposed. Hang monitor over slots in VESA plates. Secure monitor

with screws and washers in bottom two holes and tighten top screws.

3

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by incorrect

assembly or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

Safet- Waning

Contact us at

Last updated: 04/27/18

Adjust as Desied

4

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 