Vivo STAND-V002OU User manual

Other manuals for STAND-V002OU

2

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

   



Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-  

 

phillips screwdriver

 

1

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

 (x1)

! (x2) (x1)

 (x2)

M6x10

" (x1)

M6x12

# (x1)  (x1)

$ (x5) % (x1) & (x1)

4mm

' (x1)

5mm

- (x4)

D5

-  (x4)

M4x12

-  ! (x4)

M5x12

- -())** +,)) *

-

,./ 

 0

-0 0

-0 

-0 .

Mount bracket (B) to bottom of gas spring arm (A)

using bolts (E). Tighten using 4mm allen key (J).

Attach clamp (C) to bracket (B) using bolts (D) and 4mm allen key (J) Mount

according to thickness of desktop as shown in diagrams 1a-2a and 1a-2b.

2

 0 1 2

-0 3

-0. 0

-0. 

Secure stand to desktop by

tightening clamp (C).

For grommet hole mounting,

drop carriage bolt (H) through

the center of grommet base (F).

Mount grommet base to

bottom of gas spring arm (A)

using bolts (E). Tighten using

4mm allen key (J).

Run carriage bolt (H) through grommet hole in desktop. Attach metal plate (I) and

wingnut (G). Tighten wingnut.

3

 3

 4

Adjust tension in gas spring arms (A) and monitor brackets using mm allen key (K).

Remove bottom plastic covers from gas spring arms (A) using phillips screwdriver end

of mm allen key (K).

 

Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitors,

making sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plates.

Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two

holes. Tighten all eight bolts using phillips screwdriver end of mm allen key (K).

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by incorrect

assembly or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

5/ 6

  

Last updated: 04/30/18

7  

Run cables from monitors through bottom of gas spring arms (A). Reattach plastic

covers as shown in diagram.

 8

4