Vivo STAND V101 User manual

  

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-  

 

phillips screwdriver

 

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

- -   !" 

 (x1)

VES Plate

# (x1)

rm

 (x1)

“ C Clamp

 (x2)

Pole

$ (x1)

Cable Clip

% (x1)

Grommet Base

& (x5)

Rubber Pad

' (x3)

Bolt

( (x1)

Support Plate

) (x1)

humb Screw

* (x1)

4mm lle% Key

+ (x1)

6mm lle% Key

 (x1)

Pole Cap

-  (x4)

M4x12

- # (x4)

M4x16

-  (x4)

M5x12

-  (x4)

M5x16

- $ (x4)

- % (x4)

Spacer

",- 

 

Attach pole cap (M) to top of pole (D).

 .

Stick soft pads (G) to the underside of clamp (C). Attach pole (D) to

clamp (C) using bolts (H). Tighten using 4mm allen key (K). Attach

clamp (C) to desktop.

/  01 " (

10-88mm

 . 23

/ # &"" # (

For grommet hole mounting, remove screw in top of bolt on clamp

(C). Stick soft pads (G) to bottom of grommet base (F). Attach

grommet plate (I) to bolt and run through grommet hole into

grommet base (F) and thread into pole (D) as shown in diagram.

 4

Slide cable management clip (E) and arm (B) onto pole (D) and

tighten using 6mm allen key (L).

 5

Adjust tension in monitor bracket with 6mm allen key (L).

 6

Route cables through cable management clips.

 7

/  % # 

Attach VESA plate (A) to monitor using bolts (M-A) or (M-C) and

washers (M-E).

/ #   # 

Attach VESA plate (A) to monitor using bolts (M-B) or (M-D), washers

(M-E), and spacers (M-F).

 8

Slide VESA plate (A) into bracket on arm (B) and secure using thumb

screws (J) as shown in diagram.

M-A

M-C

M-E

M-B

M-D

M-E

M-F

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by incorrect

assembly or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

9- :

  

Last updated: 0 /22/18

 ;

Store allen key (L, K) in cable management clip (E) for future

adjustments.

<  

180 °

+45°

-45°

180 °

360 °

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 