Vivo STAND-V006F User manual

Hex Monitor Desk Stand

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v006f

SKU: STAND-V006F

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Pole

B(x1)

Base

C1 (x4)

VESA Plate

(Side)

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

C2 (x2)

VESA Plate

(Center)

D (x4)

Curved Arm

E (x2)

Arm Connect

Bracket

F (x2)

Pole Mount

Bracket

G (x8)

M6x25

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

H (x8)

M6 Washer

I(x4)

Arm Cap

J(x3)

M6x29

K (x1)

Decorative Cover

L (x1)

Allen Wrench

Set

M (x48)

M4 Washer

N(x24)

M4x12 Thumb Bolt

P(x24)

M4 Spacer

O (x24)

M8x10

R (x4)

Wire Clip

Q (x4)

M8x10

S(x4)

M4x16 with

Washer

ASSEMBLY STEPS

TOOLS NEEDED

Phillips

Screwdriver

STEP 1

Install the pole (A) to the weighted base (B) using M6x29 bolts (J). Tighten with a Phillips screwdriver

and install decorative cover (K).

22 lbs

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

STEP 2

Assemble the curved arms (D) and arm connect brackets (E) to pole mount brackets (F) using M6x25

bolts (G) and M6 washers (H). Tighten with the medium Allen wrench (L). Carefully slide assembled

monitor arms down onto the pole, making sure center monitor hooks on arm connect brackets are

facing up, and secure with M8x10 bolts (Q) using the medium Allen wrench (L). Attach the wire clips

(R) to the monitor arms.

ghe

STEP 3

OPTION A: Flat Back Monitor

Attach the VESA brackets (C1, C2) to the monitors using M4x12 thumb bolts (N) with M4 washers (M).

NOTE: Hand tighten screws to avoid stripping the plastic screw heads.

OPTION B: Curved Back Monitor

Attach the VESA brackets (C1, C2) to the monitors using M4 spacers (P) and M4x30 bolts (O) with M4

washers (M). Tighten with a Phillips screwdriver.

STEP 4

Hang the center monitors onto the hooks of arm connect brackets. Secure with the M4x16 bolts with

washers (S) and tighten with a Phillips screwdriver. Slide the side monitors onto the curved arms and

tighten knobs. Press arm caps (I) onto ends of curved arms.

Tighten the grub screw on the back of each monitor joint using the small Allen wrench (L) to fix tilt

angle of monitors.

Plasti c Knob

gru b screw

STEP 5

To adjust monitor height, slightly loosen the M4x16 bolts on the sides of each bracket and turn the

screw on top using a Phillips screwdriver. Tighten the M4x16 bolts aer adjustment.

Bolt

Manage cables using the wire clips. Remove the split cap from the pole and feed cables through,

pulling ends out from the opening in back. Replace the split cap when finished.

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 