Vivo MOUNT-POLE01A User manual

Pole Mount Monitor Arm for VESA 75x75mm and

100x100mm

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-pole01a

SKU: MOUNT-POLE01A

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

ASSEMBLY STEPS

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do

not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly

or inappropriate use.

STEP 1

Slide mounting arm (A) onto

pole and tighten bolts using

the 6mm Allen wrench (F). For

pole sizes larger than 45mm,

swap pre-installed bolts with

M8x70 bolts (D). Attach cable

clip (E) to arm.

PACKAGE CONTENTS

D(x2)

M8x70

C(x1)

Thumbscrew

A(x1)

Mounting Arm

E(x1)

Cable Clip

M-E (x4)

D5 Washer

M-D (x4)

M5x16

M-C (x4)

M5x12

F(x1)

6mm Allen

Wrench

B(x1)

VESA Plate

M-A (x4)

M4x12

M-B (x4)

M4x16

M-F (x4)

Spacer

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

TOOLS NEEDED

Phillips

Screwdriver

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

17.6lbs

(8kg)

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3

STEP 3

Slide the VESA plate with monitor onto the head of the mounting

arm, and secure with the thumbscrew (C).

Adjust the tilt and swivel joints with the Allen

wrench (F). Use the cable clip to organize cables.

STEP 2

OPTION A: Flat Back Monitor

Attach VESA plate (B) to monitor using 12mm

screws (M-A, M-C) with washers (M-E).

OPTION B: Curved Back Monitor

Attach VESA plate (B) to monitor using

16mm screws (M-B, M-D) with washers

(M-E) and spacers (M-F).

STEP 4 Adjust as Desired

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 