Vivo MOUNT-PC01W User manual
White Under Desk and Wall PC Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-pc01w
SKU: MOUNT-PC01W
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
A1 (x1)
Mount
B(x4)
4.8x16
C (x4)
4.8x38
D (x4)
Anchor
E (x12)
Pad
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
Drill
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete If unsure, please contact us at vivo-us.com,
F(x4)
Washer
G (x1)
Allen Wrench
Level
22 lbs
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Pencil
Phillips
Screwdriver
3
ASSEMBLY STEPS
STEP 1
Apply pads (E) to top, bottom, and side of the PC mount (A) as shown.
STEP 2A-1
OPTION A: Under Desk Installation
Secure PC mount (A) to bottom of desk using 4.6x16 screws (B) and washers (F).
B
F
E
4
STEP 2A-2
Loosen two screws on top of mount (one on each side) and slide side support bracket
out to maximum width.
O
STEP 2A-3
Loosen set screws for lower support using the Allen wrench (G) and slide the support
down. Place PC tower on mount, slide bottom support up until mount is fit vertically
to PC, and tighten set screws using the Allen wrench. Slide side bracket into place to
hold PC, and tighten screws using a Phillips screwdriver.
G
1
1
2
3
1
2
5
STEP 2B-1
OPTION B: Wood Wall Installation
Loosen two screws on top of mount (one on each side) and slide side support bracket out to maximum
width. Loosen set screws for lower support using the Allen wrench (G) and slide the support down.
STEP 2B-2A
3mm
X
B
B
ø3 5m
ø1 /8"
.
()
m
15mm
0.6”()
For solid wood wall, place mount (A) against wall and mark drilling locations. Using a 1/8” (3.5mm)
drill bit, drill holes 0.67” (15mm) deep. Insert two 4.8x16 screws (B) into top holes, leaving a 3mm
of thread exposed. Hang mount (A) over screws and insert two more 4.8x16 screws into lower holes.
Tighten screws with a Phillips screwdriver.
If wall has a wood stud frame, use a stud finder to locate the stud, then place mount against wall and
mark drilling locations for top and bottom holes on only one side of the mount. Using a 1/8” (3.5mm)
drill bit, drill holes 1.2” (35mm) deep. Insert a 4.8x38 screw (C) into top hole, leaving a 3mm of thread
exposed.
Hang mount (A) over screw
and insert another 4.8x38
screw into lower hole. Tighten
screws with a Phillips screw-
driver.
12
6
STEP 2B-2B
O
N
uu
√
C
D
3m m
C
OPTION C: Concrete Wall Installation
For concrete wall installation, place PC mount (A) against the wall and mark locations with a pencil.
Drill 1.2” (35mm) deep holes at marked locations using a 1/4” (6mm) drill bit. Insert anchors (D) into
holes, and insert two 4.8x38 screws (C) into top holes, leaving 3mm if thread exposed.
Hang mount over two screws in the wall. Secure with two additional 4.8x38 screws, and tighten
screws with a Phillips screwdriver.
7
STEP 2B-3
O
Place PC tower on mount, slide bottom support up until mount is fit vertically to PC, and tighten set
screws using the Allen wrench (G). Slide side bracket into place to hold PC, and tighten screws using a
Phillips screwdriver.
1
2
3
LAST UPDATED: 07/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Table of contents
Other Vivo Rack & Stand manuals
Vivo
Vivo STAND-V011 User manual
Vivo
Vivo STAND V003 User manual
Vivo
Vivo MOUNT-UVM02 User manual
Vivo
Vivo STAND-V038/W User manual
Vivo
Vivo MOUNT-KB04C User manual
Vivo
Vivo STAND-V102AF User manual
Vivo
Vivo STAND-V001CW User manual
Vivo
Vivo MOUNT-V002W User manual
Vivo
Vivo STAND-V000DL User manual
Vivo
Vivo STAND-TV00Y User manual
Vivo
Vivo STAND V001B User manual
Vivo
Vivo MOUNT-VW100F User manual
Vivo
Vivo MOUNT-PLAY1B-1 User manual
Vivo
Vivo STAND-TV22S User manual
Vivo
Vivo STAND-V012 User manual
Vivo
Vivo STAND-SIT1WD User manual
Vivo
Vivo MOUNT-SF01M User manual
Vivo
Vivo MOUNT-E-WM075 User manual
Vivo
Vivo STAND-V200T User manual
Vivo
Vivo DESK-E-200W User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
