82801/2802 Power Analyzer User Guide
DCDNRANGEDLY – User Set Minimum Downrange Delay __________ 120
VRANGE – Select a Voltage Input Range ________________________ 120
AINPUT – Select the Current Input Mode_________________________ 120
ARANGE – Select a Current Input Range (Shunt Input Only) _________ 121
TRANGE – Select a Current Input Range (Transducer Input Only) _____ 121
STRICTRANGING – Forces the App. of the Requested Fixed Range___ 121
SHUNTRATIO1 and SHUNTRATIO2 – Sets A input CT Ratio ________ 122
TRANSRATIO1 and TRANSRATIO2 –sets T input CT Ratio__________ 122
MSRSOURCE – Sets Whether the Pwr Source / Load is to be Meas.___ 123
WIRINGCOMP – Enables Wiring Impedance Compensations_________ 123
WIRINGLOSS – Sets the Wiring Loss Impedance Value _____________ 123
WIRINGLOSSN – Neutral Wiring Loss (2802 only) _________________ 123
WIRINGLOSSG – Ground Wiring Loss (2802 only) _________________ 123
VBURDENCOMP – Enables Voltage Burden Compensation _________ 124
REVERSEV – Enables Reversal of Voltage Measurement Polarities ___ 124
REVERSEA – Enables Reversal of Current Measurement Polarities ___ 124
LINECONTROL – Configures the Line Switch _____________________ 124
LINEPHASE – Internal Line Switch Turn On Phase_________________ 124
INRUSHARNG – Sets the A input Inrush Range ___________________ 125
INRUSHTRNG – Sets the T input Inrush Range ___________________ 125
FILTEREDINRUSH –Filtered or Unfilt. Signal is Captured During Inrush 125
WAVETRIG – Sets the Method of Triggering Waveform Capture ______ 125
TRIGVOLTS – Sets the Voltage for Waveform Capture Triggering _____ 126
TRIGAMPS – Sets the Current for Waveform Capture Triggering ______ 126
READ and UPDATE commands ___________________________________ 127
Normal Results –____________________________________________ 129
Highest Measurement During an Inrush & Startup __________________ 138
Integrated Results (scaling in unit.Hours) _________________________ 139
Integrated Average Results ___________________________________ 139
Measurement Extents during Integration _________________________ 140
Charge & Discharge data (scaled in unit.Hours) ___________________ 143
Special Data _______________________________________________ 143
APPENDIX A - PHYSICAL SPECIFICATIONS____________________________ 146
General_______________________________________________________ 146
Environment _______________________________________________ 146
