- 5 -
1.4 Annual Product Calibration
This product is a high-precision measurement device with
sensive components – please handle with care. To ensure
the accuracy of measurements, it is recommended to have
the unit calibrated once a year. Please contact your agent or
our customer service department for calibraon service.
1.5 Product Notes and Precautions
- 6 -
The MK350D LED Meter contains sensive components.
Please unpack with care, as any trauma to the unit may
damage the equipment. Contact your agent if the unit
appears not to be operang normally. Do not aempt any
repairs – all repairs must be performed by qualified service
agents.
Precauons / Warnings
Please read the following precauons to avoid fire, excessive heat, chemical
leakage and explosion.
Do not disassemble or modify the baery.
Do not expose the baery to heat (fire) or water/moisture.
If the unit is plugged into the power adapter and the baery seems to be
overheang, or if there is smoke or peculiar odors emanang from the unit,
unplug immediately to avoid the possibility of fire.
However, do not touch the cables if there is heat emanang from near the
cables as melted or deformed cables could expose wiring and result in burns
or electric shock.
Do not use cloth or anything to wrap or cover the equipment while charging
– this could cause the unit to overheat, melng the casing or causing fire.
If the unit is accidently immersed in water, or if moisture has seeped inside,
or metal objects have dropped into the casing, immediately remove the
baery to avoid fire or electric shock.
Do not operate or store the baery in high-temperature environments - it
will cause baery leakage and/or shorten the life of the baery .
Do not use paint thinner, benzene or other organic solvents to clean the
equipment– this may damage the exterior finish or touch screen, and may
even ignite fire.
■
■
■
■
■
■
■
■
