Triminator Maker User manual

USER

GUIDE

V1.1

INTRODUCTION......................................................................................................................................... 3

SAFETY MESSAGE.......................................................................................................................................................3

DISCLAIMER..................................................................................................................................................................4

WARNING LABELS...................................................................................................................................................... 4

SERVICE AND REPAIRS............................................................................................................................. 6

WARRANTY................................................................................................................................................8

SAFETY PRECAUTIONS............................................................................................................................. 9

COMPONENTS.........................................................................................................................................10

EMERGENCY STOP (E-Stop)..................................................................................................................................11

HMI CONTROL OVERVIEW.....................................................................................................................................11

WASHING VESSEL TILT............................................................................................................................................15

DRAIN VALVES...........................................................................................................................................................17

SOAK WEIGHT............................................................................................................................................................17

BAG HOLDER..............................................................................................................................................................17

SETUP...................................................................................................................................................... 18

OPERATING CONDITIONS.......................................................................................................................................18

UNCRATING THE MAKER™.................................................................................................................................... 19

ASSEMBLY / DISASSEMBLY....................................................................................................................20

IMPELLER REMOVAL/INSTALLATION................................................................................................................ 20

FALSE BOTTOM REMOVAL.................................................................................................................................... 20

DRAIN VALVE(S) INSTALLATION / REMOVAL................................................................................................... 20

WATER PUMP INSTALLATION/REMOVAL.........................................................................................................21

THERMOMETER REMOVAL / INSTALLATION.................................................................................................. 23

WASH BAG HOLDER INSTALLATION...................................................................................................................24

SOAK WEIGHT INSTALLATION.............................................................................................................................. 24

OPERATION............................................................................................................................................. 26

BEFORE YOU START................................................................................................................................................ 26

MACHINE START-UP SEQUENCE.........................................................................................................................26

MACHINE STOP SEQUENCE.................................................................................................................................. 27

WASHING PLANT MATERIAL.................................................................................................................. 28

WASHING TIPS...........................................................................................................................................................31

PRE-LOADED SETTINGS.........................................................................................................................................31

CLEANING YOUR MAKER™......................................................................................................................32

HAND-CLEANING THE IMPELLER MOTOR AND WATER PUMP................................................................ 33

HAND-CLEANING THE HMI................................................................................................................................... 33

SERVICING YOUR MAKER™................................................................................................................................... 33

SAFETY PRECAUTIONS...........................................................................................................................................34

BREAKERS/FUSES................................................................................................................................................... 34

REMOVING OBSTRUCTIONS................................................................................................................................. 34

MAINTENANCE SCHEDULE................................................................................................................................... 35

TROUBLESHOOTING............................................................................................................................... 37

INTRODUCTION

Congratulations on your selection of the Triminator Maker™ commercial hash washer! We want to

help you to get the best results from your new hash washer and to operate it safely. This User Guide

contains information on how to do that; please read it carefully before you set up and use your hash

washer.

We suggest you read the warranty to fully understand coverage and your responsibilities of

ownership. Keep this User Guide handy, so you can refer to it at any time. This User Guide is

considered a permanent part of the Maker™ and should remain with the hash washer if resold. The

information and specifications included in this publication are those that were in effect at the time of

approval for printing. Eteros Technologies, (Eteros) reserves the right, however, to discontinue or

change specifications or design at any time without notice and without incurring any obligation. No

part of this publication may be reproduced without written permission.

SAFETY MESSAGE

To ensure operator safety while in use, this device includes decals, guarding, and other safety

features. Operators are encouraged to use caution and best judgment when using the equipment.

Equipment should be serviced when required.

To avoid possible damage to the machine and risk of injury to the operator, consult with an Eteros

Technologies representative to answer any questions.

This document refers to the Eteros Technologies hash washing machine, the Maker™. Careless or

improper use may cause serious injury. Please read and understand these precautions thoroughly

before using the machine.

All operators must read and understand this User Guide and be trained in the safe operation and use

of the Maker™ hash washer. We recommend the owner of this equipment develop a standard

operating procedure (SOP) specific to each worksite to address any local hazards or other conditions

not outlined in this User Guide. The Maker™ hash washer must be inspected regularly for damage,

component failure, and wear. The results of the inspection activity should be documented.

Eteros Technologies makes every effort to ensure the Maker™ hash washer is compliant with all

current safety standards. It is the responsibility of the owner to ensure all municipal, provincial, state,

county, territorial, federal codes, regulations, and standards have been met in each working location.

Do not lend or rent your machine without providing the User Guide. A first-time operator should

receive practical instruction before using the machine.

This machine is not to be used for any purpose other than those expressly stated in the User Guide,

advertising literature, or other Eteros Technologies written material pertaining to the Maker™ hash

washer.

Operators must be in good physical condition and mental health to operate this device. Under no

circumstances should the device be operated by any person under the influence of any substance,

including drugs or alcohol, which might impair vision, dexterity, or judgment. Do not operate the

Maker™ hash washer when fatigued. Be alert. If tired while operating the device, take a break. Fatigue

may result in loss of control. Working with any equipment can be strenuous. If you have any condition

that might be aggravated by strenuous work, check with your doctor before operating the device.

DISCLAIMER

Eteros Technologies recognizes that the Maker™ hash washer is a purpose-built machine for

processing cannabis by licensed producers. Please check all municipal, provincial/state, and federal

laws and regulations before using the Maker™ hash washer. Eteros Technologies does not promote or

condone the use of processing equipment in any way that may be deemed illegal.

Eteros Technologies recognizes that our equipment can be used for processing herbs, hops, flowers,

and many other products. It is not the responsibility of Eteros Technologies to confirm alternative

applications for our equipment.

WARNING LABELS

Your safety and the safety of others are very important. We have provided important safety

messages in this manual and on the Triminator Maker™. This information alerts you to potential

hazards that could hurt you or others. Please read these messages carefully. Of course, it is not

practical or possible to warn you about all the hazards associated with operating or maintaining a

hash washer. You must use your own good judgment.

You will find important safety information in a variety of forms:

●Safety Labels - located on the hash washer.

●Instructions - how to use this hash washer correctly and safely.

●Safety Messages - preceded by a safety alert; a symbol and one of three signal words:

DANGER, WARNING, or CAUTION.

DANGER:

Indicates a hazardous situation that, if not avoided, will result

in serious injury and/or death. This signal word is to be

limited to the most extreme situations; typically for machine

components that, for functional purposes, cannot be guarded.

WARNING:

Indicates a potentially hazardous situation that, if not

avoided, could result in serious injury and/or death. It includes

hazards that are exposed when guards are removed. It may

also be used to alert against unsafe practices.

CAUTION:

Indicates a potentially hazardous situation that, if not

avoided, may result in minor or moderate injury. It may also

be used to alert against unsafe practices.

Damage Prevention Messages - You will also see other important messages that are preceded by

the word NOTICE. This word means:

NOTICE Your hash washer or other property can be damaged if you don’t follow instructions.

SERVICE AND REPAIRS

Repairs may only be carried out by Eteros Technologies or a designated authorized agent (service

technician).

Should the need arise, please notify us:

Eteros Technologies

6175 South Sandhill Road, Unit 600,

Las Vegas, NV 89120

www.eteros.com

www.thetriminator.com

service@thetriminator.com

(530) 265 4277

Improper interfacing, improper repair, or an unauthorized modification could result in void warranty

claims.

WARRANTY

Thank you for your purchase of the Triminator Maker™.

The Triminator Maker™ is covered by our manufacturer’s warranty as follows:

●No warranty on consumable parts, including micron bags;

●Warranty coverage for one (1) year or 1,000 operating hours, whichever occurs first, on

motors, electrical components, and the remainder of machine components.

The warranty period begins on the date the equipment is received by the customer. Any damage that

occurs during shipping will be the responsibility of Triminator.

The above terms are valid if Triminator equipment is used and maintained as directed. If the

equipment is modified in any way, all terms of this warranty are void. This warranty does not apply to

cosmetic damage, such as scratches or general wear and tear.

Should you experience a technical problem with your equipment, please contact Eteros Technologies

at the email or phone number outlined in the Service and Repairs section.

SAFETY PRECAUTIONS

SAFETY INFORMATION

Read and become familiar with the entire User Guide. Learn the equipment applications, limitations,

and possible hazards.

TRAINED WORKERS ONLY

KEEP CHILDREN and BYSTANDERS AWAY from the device. Visitors should be kept at a safe distance

from the work area.

CHECK FOR DAMAGED PARTS PRIOR TO OPERATION

The equipment should be inspected prior to use to ensure proper operation in performing its intended

function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting,

and any other conditions that may affect its operation. Any damaged part including guards should be

properly repaired or replaced.

POWER DOWN AND DISCONNECT

Power down and disconnect equipment before servicing and when changing accessories, such as

impeller, soak weight, and pump.

DON’T FORCE THE EQUIPMENT

It will operate optimally and safely at the rate for which it was designed.

USE THE RIGHT TOOL

Don’t force the device to do a job for which it was not designed.

WORK IN A SAFE ENVIRONMENT

DO NOT USE THE DEVICE IN A DANGEROUS ENVIRONMENT or damp or wet locations. Never expose

the control panel directly to rain or water. Keep the work area well-illuminated. DO NOT use the

device in the presence of flammable liquids or gasses.

KEEP THE WORK AREA CLEAN

Cluttered areas and workspaces invite accidents.

Table of contents

Other Triminator Industrial Equipment manuals

Triminator

Triminator XL DRY User manual

Triminator

Triminator BuckMaster Series User manual

Popular Industrial Equipment manuals by other brands

ABB

ABB Unifix AD Instruction handbook

Mark 7

Mark 7 Evolution user manual

Husky

Husky HyPET Original instructions

bora

bora PM-1800 user manual

Grizzly

Grizzly T32428 owner's manual

Siemens

Siemens 8MF1 Series operating instructions

ABB

ABB HT610965 Operation manual

ABB

ABB SafeLink Installation and operating instructions

Phoenix

Phoenix PHX-150 user guide

ABB

ABB A165-L32 Operation manual

ABB

ABB HT842936 Operation manual

Rioned

Rioned UrbanJet user manual

Hermetica

Hermetica 10 Series user manual

HORNER

HORNER OEE Solution manual

Hammerhead

Hammerhead HG375 parts manual

SCHUNK

SCHUNK VERO-S NSE-A3 138 Assembly and operating manual

ABB

ABB HT566657 Operation manual

Webasto

Webasto GSE CAN installation guide