Tigercat 1135 User manual
1135 HARVESTER VEHICLE MOVING
AND TRANSPORTING INSTRUCTIONS
1135 SKÖRDARE: INSTRUKTIONER
FÖR KÖRNING OCH FÖRFLYTTNING
AV FORDON
1135 ХАРВЕСТЕР: ИНСТРУКЦИИ
ПРИВОДА В ДВИЖЕНИЕ И
ТРАНСПОРТИРОВКИ МАШИНЫ
35859AMUL
ENG
SWE
RUS
ISSUE 2.2, APRIL 2012
epcatalogs.com
epcatalogs.com
3
ENGLISH
CRANE AND ATTACHMENT POSITIONING FOR TRANSPORT...... 12
MACHINE WEIGHT............................................................................ 14
TRANSPORTING INSTRUCTIONS ................................................... 11
VEHICLE MOVING INSTRUCTIONS................................................... 4
SVENSKA
INSTRUKTIONER FÖR FÖRLYTTNING AV FORDON...................... 16
MASKINVIKT ...................................................................................... 26
TRANSPORT INSTRUKTIONER ....................................................... 23
UPPSTÄLLNING AV KRAN OCH AGGREGAT FÖR TRANSPORT... 24
РУССКИЙ
ВЕС МАШИНЫ .................................................................................. 38
ИНСТРУКЦИИ ПРИВОДА МАШИНЫ В ДВИЖЕНИЕ...................... 28
ИНСТРУКЦИИ ТРАНСПОРТИРОВКИ.............................................. 35
РАСПОЛОЖЕНИЕ КРАНА И ОБОРУДОВАНИЯ ДЛЯ
ТРАНСПОРТИРОВКИ.................................................................... 36
INDEX
epcatalogs.com
4
ENGLISH
VEHICLE MOVING INSTRUCTIONS
For 1135 Harvester
BATTERY DISCONNECT SWITCH
IMPORTANT:
Read and understand these safety instructions before off loading
this machine. See operator’s manual in storage compartment in
cab door for additional information.
ARTICULATION LOCK BAR
1. Turn battery disconnect switch
to “on”. This switch is located
behind a small access door
on the left side of the engine
compartment.
2. Ensure area is clear before
moving machine and that
any personnel are at a safe
distance.
3. Remove securing pins and
red articulation lock bar from
between frames.
4. Sit in operator’s seat, close
door and fasten seat belt.
5. Place both seat armrests down,
in operating position.
6. Ensure seat is facing the foot
pedals (forward). To rotate the
seat, turn the key to the “on”
position” (do not start engine).
Use the green push button
located on outside of left hand
armrest pod, to unlock seat
rotation.
7. Push button again to lock seat
rotation.
RETAINING
PIN
ARTICULATION
LOCK BAR
epcatalogs.com
5
8. Check that outside personnel
have not moved into a
hazardous location near the
machine, before starting the
engine.
9. Press horn button several
times to alert personnel in
the area of your intent to start
engine. Ensure key is in “on”
position and wait for the “wait to
start” light to go out.
10. Turn key switch to “start”
position, release when engine
starts.
11. Ensure that park brake lever
is off - pushed forward
toward front of machine and
park brake switch
P
is OFF
to allow pilot to be reset.
12. Press pilot reset button
on the right hand side to
allow machine functions to be
operable.
13. Warning, steering, ladder and
other hydraulic functions are
now active.
P
epcatalogs.com
Table of contents
Other Tigercat Construction Equipment manuals
Tigercat
Tigercat X870C User manual
Tigercat
Tigercat 220C User manual
Tigercat
Tigercat T234 User manual
Tigercat
Tigercat 234 Series User manual
Tigercat
Tigercat T234B User manual
Tigercat
Tigercat 724D User manual
Tigercat
Tigercat LH830 User manual
Tigercat
Tigercat S860 User manual
Tigercat
Tigercat 880 User manual
Tigercat
Tigercat 635C User manual
Tigercat
Tigercat 620C User manual
Tigercat
Tigercat 822C User manual
Tigercat
Tigercat 250D User manual
Tigercat
Tigercat 800D Series User manual
Tigercat
Tigercat 244 User manual
Tigercat
Tigercat 630B User manual
Tigercat
Tigercat C640C User manual
Tigercat
Tigercat 615C User manual
Tigercat
Tigercat AD610C User manual
Tigercat
Tigercat T750 User manual
