Teledyne 3000TA Installation and user guide

How to Test the DC Voltages on 3000TA Rear Panel Board?

Scope:

Power Module used in 3000TA is compact & maintenance free module,

which normally doesn’t give any kind of maintenance or service. If,

however, it is observed that display is missing due to any voltage problem.

It can measured as follows.

Parts:

Multimeter

Tools:

Screw Driver set.

Procedure:

Remove power to the instrument by unplugging the power cord at the

power source.

Follow the below procedure for removing the rear panel assembly.

To detach the rear panel, remove only the 14 screws marked with an X.

Position the rear panel assembly properly & apply the power supply to the

instrument.

Locate the Power supply module on the Rear Panel Board. Kept the

Multimeter in DC Voltage range (0-20 or 40 VDC range).

Refer the below Circuit diagram to measure the voltages on the Rear Panel

Board- Power Module;

Insure that AC power supply is available at PS1 pin 1 & 2.

To measure the +15 VDC, put the multimeter –Ve lead at GND point “A” &

put the multimeter +Ve at +15 VDC test point OR PS1 pin “8”, observe the

measured voltage.

To measure the -15 VDC, put the multimeter –Ve lead at GND point “A” &

put the multimeter +Ve at -15 VDC test point OR PS1 pin “3”, observe the

measured voltage.

To measure the +5 VDC, put the multimeter –Ve lead at GND point “A” &

put the multimeter +Ve at +5 VDC test point OR PS1 pin “7”, observe the

measured voltage.

If all three +15 VDC, -15VDC & +5 VDC are correct then the Power supply

module is OK, other wise it need replacement.

Other manuals for 3000TA

2

Table of contents

Other Teledyne Measuring Instrument manuals

Teledyne

Teledyne PS200 Series Manual

Teledyne

Teledyne 300M User manual

Teledyne

Teledyne WIRELESS GROUNDLINK WQAR User manual

Teledyne

Teledyne WORKHORSE Quick reference guide

Teledyne

Teledyne 200A User manual

Teledyne

Teledyne 3300TB User manual

Teledyne

Teledyne T360 User manual

Teledyne

Teledyne HVG-2020B User manual

Teledyne

Teledyne 402R-EU User manual

Teledyne

Teledyne T200H User manual

Teledyne

Teledyne T3MIL50 User manual

Teledyne

Teledyne First Responder CG Instruction Manual

Teledyne

Teledyne TIENet 301 Operating instructions

Teledyne

Teledyne T3SA3000-NFP User manual

Teledyne

Teledyne AX300 User manual

Teledyne

Teledyne 465M User manual

Teledyne

Teledyne T3LVD User manual

Teledyne

Teledyne T3VNA Owner's manual

Teledyne

Teledyne HVD3102 User manual

Teledyne

Teledyne EXPLORER User manual

Teledyne

Teledyne 8800T User manual

Teledyne

Teledyne HFM-301 User manual

Teledyne

Teledyne HASTINGS 2002 User manual

Teledyne

Teledyne 100E User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual