Tektronix 6 series User manual

6SeriesLowProﬁle Digitizer (LPD64)

With Factory Option 6-SEC

Enhanced Security Instrument

Declassiﬁcation and Security

ZZZ

Instructions

www.tektronix.com

*P077157000*

077-1570-00

national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published

material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

TekSecure is a trademark of Tektronix; Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tek.com to ﬁnd contacts in your area.

Table of Contents

Preface .............................................................................................................................................................. iii

Supported products ........................................................................................................................................... iii

About option 6-SEC.......................................................................................................................................... iv

Terms............................................................................................................................................................ v

Memory device clear and sanitize procedures................................................................................................................... 1

Nonvolatile, volatile memory device table terminology..................... ................................ .. ............................................ 1

Nonvolatile, volatile memory devices: information and clearing/sanitizing ...... ... ... .......... ... ... ... ... ........ ... ... ............ ................ 2

Media and data export devices ............................................................................................................................... 6

Resetting the instrument CMOS ............................................................................................................................. 7

Resetting the instrument clock ............................................................................................................................... 8

How to sanitize a working instrument...... .. ............................................ .. ..................................................................... 10

How to sanitize a nonfunctional instrument ................................. ........................................ .. ......................................... 12

Repair charges................................................................................................................................................. 14

LPD64 Declassiﬁcation and Security Instructions i

Table of Contents

ii LPD64 Declassiﬁcation and Security Instructions

Preface

This document helps customers with data security concerns to clear orsanitize aTektronix 6 Series Low Proﬁle Digitizer

(LPD64) instrument with factory installed option 6-SEC.

The instrument has data storage devices (memory and a removable mass storage drive) and data export interfaces (USB and

Ethernet). These instructions describe how to clear or sanitize the memory devices and disable the data export interfaces.

The instructions also describe how to sanitize an instrument that is not functioning.

Reference The procedures in this document are written to meet the requirements speciﬁed in:

National Industrial Security Program Operating Manual (NISPOM), DoD 5220.22–M, Chapter 8

Defense Security Service Manual for the Certiﬁcation and Accreditation of Classiﬁed Systems under the NISPOM

Supported products

This document covers the Tektronix 6 Series Low Proﬁle Digitizer (LPD64) product with factory option 6-SEC installed.

NOTE. Option 6-SEC must be ordered at the same time you order an instrument.

LPD64 Declassiﬁcation and Security Instructions iii

Preface

About option 6-SEC

NOTE. Option 6-SEC must be ordered at the same time you order an instrument.

Option 6-SEC provides the highest level of instrument security for the LPD64. Option features include:

Instrument hardware that is conﬁgured to easily declassify the instrument:

The main system memory is easily removed without disassembling the instrument

Data can only be saved to or read from a USB port on the instrument, a mounted network drive, or through the

programmatic interface

Password protection to enable/disable external USB Host and Device ports

Password protection to enable/disable ﬁrmware upgrades or downgrades

PasswordprotectiontopreventBIOSmodiﬁcation and booting from USB ﬂash devices.

iv LPD64 Declassiﬁcation and Security Instructions

Preface

Terms

The following terms may be used in this document:

Clear. This eradicates data on media/memory before reusing it in a secured area. All reusable memory is cleared to

deny access to previously stored information by standard means of access.

Erase. This is equivalent to clear.

Media. Storage/data export device. A device that stores or exports data from the instrument, such as a USB ﬂash

drive or USB port.

Sanitize. This removes the data from media/memory so that the data cannot be recovered using any known technology.

This is typically used when the device is moved (temporarily or permanently) from a secured area to a nonsecured area.

Scrub. This is equivalent to sanitize.

Remove. This is a physical means to clear the data by removing the memory device from the instrument. Instructions

are available in the product service manual.

User-Accessible. The user can directly retrieve the memory device contents.

User-Modiﬁable. The memory device can be written to by the user during normal instrument operation, using the

instrument user interface or remote control.

Volatile memory. Memory that loses data when the instrument is powered off.

Nonvolatile memory. Memory that retains data when the instrument is powered off.

Power off. Some instruments have a “Standby” mode, in which power is still supplied to the instrument. For clearing

data, putting the instrument in Standby mode does not qualify as powering off. For these products, you must either

push a rear-panel OFF switch or remove the power source from the instrument.

Instrument Declassiﬁcation. A term that refers to procedures that must be undertaken before an instrument can be

removed from a secure environment. Declassiﬁcation procedures include memory sanitization, memory removal,

and sometimes both.

LPD64 Declassiﬁcation and Security Instructions v

Preface

vi LPD64 Declassiﬁcation and Security Instructions

Memory device clear and sanitize procedures

Nonvolatile, volatile memory device table terminology

The tables in this section use the following terms:

User data. Describes the type of information stored in the device. Refers to waveforms or other measurement

information representing signals connected to the instrument by users.

User settings. Describes the type of information stored in the device. Refers to instrument settings that can be

changed by the user.

Both. Describes the type of information stored in the device. It means that both user data and user settings are

stored in the device.

None. Describes the type of information stored in the device. It means that neither user data or user settings are

stored in the device.

Directly. Describes how data is modiﬁed. It means that the user can modify the data.

Indirectly. Describes how data is modiﬁed. It means that the instrument system resources modiﬁes the data and that

the user cannot modify the data.

LPD64 Declassiﬁcation and Security Instructions 1

Memory device clear and sanitize procedures

Nonvolatile, volatile memory devices: information and clearing/sanitizing

The following tables list the volatile and nonvolatile memory devices in the instrument 1.

Table1:Volatilememorydevices

Type and size Function

Type of user

info stored

Backed-up

by battery

Method of

modiﬁcation

Data input

method Location

User

accessible To clear To sanitize

SDRAM 16 GB Host processor

memory

User data No Indirectly Written by

processor

system

Module socket

(SODIMM)

on the carrier

interface

assembly

No Unplug the instrument

for at least 30 seconds

Unplug the instrument

for at least 30 seconds

SDRAM

16 GB

Holds active

acquisition data

User data No Indirectly Application

software

operations

Module socket

(SODIMM) on

the acquisition

board

No Unplug the instrument

for at least 30 seconds

Unplug the instrument

for at least 30 seconds

SDRAM 4 GB Holds video graphics

data

User data No Indirectly Application

software

operations

Acquisition

board

No Unplug the instrument

for at least 30 seconds

Unplug the instrument

for at least 30 seconds

CMOS RAM 256

bytes

Holds clock and BIOS

conﬁguration data

None Yes Indirectly BIOS

operations

Carrier interface

assembly

Yes Unplug the instrument

for at least

30 seconds.

Push the CMOS

clear button on

the bottom of the

instrument for at least

30 seconds. (See

page 8, Resetting the

instrument clock.)

Unplug the instrument

for at least

30 seconds.

Push the CMOS

clear button on

the bottom of the

instrument for at least

30 seconds. (See

page 8, Resetting the

instrument clock.)

FPGA <30 MB Interface between

compute system and

acquisition system

None No None Written by

processor

system

Acquisition

board

No Unplug the instrument

for at least

30 seconds.

Unplug the instrument

for at least

30 seconds.

1These are the memory capacities at the time of publishing this document, but are subject to change.

2LPD64 Declassiﬁcation and Security Instructions

Other manuals for 6 series

This manual suits for next models

Table of contents

Other Tektronix Measuring Instrument manuals

Tektronix

Tektronix TIVH Series User manual

Tektronix

Tektronix DL-11 DELAY LINE User manual

Tektronix

Tektronix TLA6000 Series User manual

Tektronix

Tektronix VM700T User manual

Tektronix

Tektronix 7853A User manual

Tektronix

Tektronix WFM5000 Series Use and care manual

Tektronix

Tektronix TLA500 Series Use and care manual

Tektronix

Tektronix WFM4000 Series User manual

Tektronix

Tektronix FCA3003 User manual

Tektronix

Tektronix DSA8200 Series User manual

Tektronix

Tektronix WVR5200 Series Use and care manual

Tektronix

Tektronix 82A00 Installation and maintenance instructions

Tektronix

Tektronix TPR1000 Installation instructions

Tektronix

Tektronix 491 User manual

Tektronix

Tektronix TMS 165 User manual

Tektronix

Tektronix DTM500 Series Use and care manual

Tektronix

Tektronix 7L5 User manual

Tektronix

Tektronix S-1 User manual

Tektronix

Tektronix 7L5 Manual

Tektronix

Tektronix TekSmartLab TBX3000A Manual

Tektronix

Tektronix 492, 492P User manual

Tektronix

Tektronix 067-0599-00 User manual

Tektronix

Tektronix RSA5103B Manual

Tektronix

Tektronix WFM2300 Administrator Guide

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual