3PVS-CAMB
SPECIFICATIONS
Always use discretion when installing video and or audio surveillance
equipment especially when there is perceived privacy or an expectation of
privacy. Inquire regarding federal, state and or local regulations applicable
to the lawful installation of video and or audio recording or surveillance.
Party consent may be required.
PVS-CAMB 4
ITEM PVS-CAMB
Image Sensor Varifocal Lens (3.5mm ~ 8mm)
Effective Pixels 512H ×492V (270K pixels)
Scanning System 525 Lines 2:1 Interlace
Scanning
Frequency 15.734KHz(H), 59.94Hz(V)
Resolution 420TV – Lines
Shutter Speed 1/60 ~ 1/100,000 sec
S/N Ratio More than 50dB (AGC off)
Sync. System Internal
Min. Illumination 0.02LUX (F1.2)
Video Output VBS 1.0 Vp-p (75 ohm load)
Lens C/CS MOUNT
Power Supply DC 9.5V ~ 16V
Power
Consumption 90mA(DC12V)
Operating Temp. -10℃~ +50℃
Operating Humidity 90% RH max.
Weight Approx. 250g
Accessory 60ft cable , stand, wrench
Option : PIR sensor
SPECIFICATIONS
yESC ON/OFF
yAGC ON/OFF
ySPEAKER ON/OFF
yAUDIO
ySENSOR (TRIGGER,G,B+) FOR PIR
50mm
ESC AGC
ON ON SPEAKER
ESC AGC
OFF OFF
OUT IN
POWER
MONITOR
50mm
DIN JACK CONFIGURATION
①DC 12V OUTPUT ② N.C
③ VIDEO INPUT ④ PIR INPUT
⑤AUDIO INPUT ⑥AUDIO OUTPUT
SNESOR CABLE CONFIGURATION
(RED: DC 12V)
(BLACK : GND)
(WHITE : TRIGGER)
SENSOR
TRIGGER G B+
SPEAKER
+ GND
⑥ ⑤
④ ③
② ①
