OSD MENU DETAILS
9
*MOTION*
1)MOTION : Adjust motion detection settings.
2)AREA : Selects the current motion zone from area1 to 4
3)SENSITIVITY : Sets the desired multiple of the digital exposure length.
(000~030)
4)DISPLAY : Sets the desired display mode when the motion is detected.
(OFF/MESSAGE/TRACE)
5)HOLD TIME : Sets the hold time when the event is detected.(000~015)
6)ALARM OUTPUT : Selects the alarm output mode. (ON/OFF)
*PRIVACY
1)MASK 1~8 : Selects the current mask number
2)DOT SEL : Sets the size of Left-Bottom/Right-Bottom/Left-Top/Right-
Top.
3)DOT XY : Sets the coordinate of Horizontal / Vertical Axis for PM
position.
4)MOVE XY : Moves the mask horizontally and vertically.
5)COLOR : Selects the desired mask color. Black, White, Red, Green,
Blue, Magenta, Cyan, Gray colors are available.
*SPECIAL*
1) LANGUAGE : Sets the desired OSD language.
(ENGLISH, SPANISH, PORTUGUESE, POLISH,
GERMAN, ITALIAN, NETHERLANDIC, KOREAN, CHINESE ).
2) TITLE : Determine the camera name. (ON/OFF)
3) COMMUNICATION : Used to configure the RS-485 port.
*Requires the RS-485 option.
ID : Sets the ID for the RS-485 (0~255).
BAUD RATE : Sets the baud rate for the RS-485 (2400~9600).
PROTOCOL : Pelco-D
4) DPC : Automatically detect and correct the defective pixels in a
camera image sensor array.
AUTO : Adjust white THR and Luma THR level.
White THR (000~255) / LUMA THR (000~255)
5) FACTORY SET : Resets all settings to it’s factory defaults.
