Speco HT-INTD3 User manual

200 New Highway

Amityville, NY 11701

631-957-8700

www.specotech.com

Intensifier Series

Camera

HT-INTD3

HT-INTD4

Please read this manual thoroughly before operation and keep

it handy for further reference.

1 2

Contents

Package Contents Operating Your Camera

Troubleshooting

35~36

* SET UP --------------------------------------------------------------11~12

* SET UP LENS-------------------------------------------------------13~14

* SHUTTER SPEED CONTROL ----------------------------------15~18

* BACK LIGHT--------------------------------------------------------------19

* AUTO GAIN (AGC) -----------------------------------------------------20

* WHITE BALANCE --------------------------------------------------21~22

* REDUCE NOISE---------------------------------------------------------23

* INTENSIFIER-------------------------------------------------------------24

* CAMERA TITLE-------------------------------------------------------25~26

* DAY/NIGHT/SYNC---------------------------------------------------27~28

* MOTION DETECTION-----------------------------------------------29~30

* PRIVACY-------------------------------------------------------------------31

* REVERSE------------------------------------------------------------------32

* DETAIL----------------------------------------------------------------------33

* DEFAULT/RETURN-----------------------------------------------------34

Precautions 4

Camera Installation 5

Internal Components 6

Features 7~8

----------------------9~10

Specifications / Dimensions 37~38

Warranty 39

3 4

PRECAUTIONS

PACKAGE CONTENTS

Please make sure that the following items are included

in the package:

1 HT-INTD Camera

1 Remote Controller

1 IR Receiver

4 Mounting Screws

1 Allen Wrench

1 Allen Bit

1 Power Cable Adaptor (for optional use)

Please leave this manual with the end-user for future

reference.

HT-INTD CAMERAS SHOULD BE ONLY INSTALLED BY

QUALIFIED PERSONNEL

TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE

USE PROER POWER CABLE.

DO NOT CELAN THE COVER WITH AN ABRAISIVE

CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR

TISSUE TO CLEAN THE DOME COVER

THERE ARE NO USER-SERVIEABLE PARTS INSIDE.

PLEASE DO DISASSEMBLE THIS CAMERA OTHER THAN

TO MAKE INITIAL ADJUSTMENTS.

PLEASE USE A UL APPROVED REGULATED 24 VOLT AC

OR 12 VOLT DC POWER SUPPLY

PLEASE USE APPROPRIATE LOW VOLTAGE POWER

CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK.

PLEASE INSURE THAT YOUR INSTALLATION AREA CAN

SUPPORT THE WEIGHT OF THE CAMERA.

PLEASE HANDLE THIS CAMERA CAREFULLY:

- DON’T EXPOSE THE CAMERA TO DIRECT SUN

5 6

Connections:

1. When using 12-Volts DC (constant voltage 600mA)

-CONNECT POWER TO THE POWER JACK.

2. When using 24-Volts AC (40 VA)

-CONNECT ACCESSORY CABLE TO THE POWER JACK AND

CONNECT AC 24V TO THE LEAD.

3. CONNECT VIDEO CABLE

-CONNECT BNC CABLE TO THE BNC JACK.

Note: All connections can be made directly to the PCB if desired

CAMERA INSTALLATION

connect

CENTER:(+)

POWER INPUT:RED

AC 24V

connect

CENTER:(+)

POWER INPUT:RED

YELLO W: VIDEO O UT

INTERNAL COMPONENTS

1. Structure

(1) DC AUTO-IRIS LENS

Adjust between TÅÆW (TELE ÅÆ WIDE) to set the angle (focal

length)

Set the focus by adjusting ∞ÅÆN

NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED

INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".

DC Auto lris

4~9m or 5~50mm

Features

♣SLC

When the image is in front of strong background lighting,

your camera allows you to get the best image.

♣INTENSIFIER

1/3 inch high density CCD and digital processor permit

high quality pictures to be captured in very low light

conditions.

♣High Resolution

Horizontal resolution of 530TV lines is

achieved by using a SONY Double Speed CCD with

410,000 pixels, yielding pictures with a high S/N ratio.

♣Motion Detection

Built in motion detector with adjustable areas of coverage will

flash a warning on the screen when motion is detected.

♣Dynamic Noise Reduction

The Intensifier camera has a DSP chip that can

remove image noise, showing clean images in

low light conditions.

♣ELECTRONIC DAY / NIGHT

The Intensifier camera can show color pictures in all lighting

conditions, or you can have it automatically switch to a B/W

picture in low light conditions

♣MANUAL / AUTO IRIS LENS

The Intensifier camera will work with auto iris,manual iris and

fixed iris lenses.

♣OSD

All camera functions are menu driven for easy use.

7 8

◈Functions

Operating your camera

SET UP MENU LENS OPTION

●DC ●MANUAL

SHUTTER

●OFF ●F/L ●MANUAL

WHITE BALANCE

●ATW ●AWC MANUAL●

SLC – ( Speco Light Compensation )

●OFF ●LOW ●MIDDLE ●HIGH

Auto Gain

●OFF ●LOW ●MIDDLE ●HIGH

REDUCE NOISE

●OFF ●LOW ●MIDDLE ●HIGH

INTENSIFIER

●AUTO ●OFF

●CAMERA TITLE ●DAY/NIGHT ●SYNC

●MOTION ●PRIVACY ●REVERSE

●DETAIL ●DEFAULT ●PAGE 1

EXIT

◈OSD Menu Setting

SETUP DOWN

LEFT

DOWN

RIGHT

SET

Operating your camera

11 12

When you call Camera Address

->Push 0 Button

->Push 1 Button

->Push CAM Button

Power Connector

(DC12V in)

485(+),(-)

Baud Rate Setting

Buzzer On/Off

1. When controledl by RS-485, Pelco-D protocol (Option), refer to the following.

A. DIP Switch Setting on the Camera

(Factory default : Camera Address = 01, Baud Rate = 2400bps)

B. Receiver Setting to use with IR Remote Controller

(Factory default : Baud Rate = 2400bps, Chart is same as

above)

C. System Integration

D. IR Remote Controller

-Can call and control each camera on the monitor by the following.

•Up to 15 Cameras can be

controlled by 1 IR Remote

Controller & 1 Receiver. You

must set up each camera’s

address by DIP Switches for

proper addressing.

Multiflexer

CCD Camera

Monitor

SET / Menu buttonUP button

DOWN

button

RIGHT button

LEFT button

Receiver

IR Remote

Controller

485(+)

485(-)

①②

RS485 Address Set

①

RS485 Baud rate Set

②

•Please Observe Polarity!

Operating your camera Operating your camera - LENS

1. Press the SET button to access the SETUP mode.

●SETUP menu is displayed on the monitor screen.

2. Select the desired feature using the UP or DOWN button.

●Each time you press the UP or DOWN button, the arrow

indicator moves up or down.

●Move the arrow indicator to the desired feature item.

3. Change the status of the selected feature using the LEFT

or RIGHT button.

4. When completed, move the arrow indicator to ‘EXIT’ and press

the SET button.

•●You can access the submenu by using SET button.

•●For the mode with ’---’, you may not access submenu.

13 14

Notes

1) Setting up the LENS

Select the lens by pressing the RIGHT button.

①On the SETUP menu screen, move the arrow indicator to the lens

using the UP or DOWN button.

②Select the desired feature using the LEFT or RIGHT button.

Operating your camera – SHUTTER SPEED CONTROL①

▶When the DC LENS is selected, press the SET button

to control the BRIGHTNESS.

●AUOT IRIS LENS (DC TYPE) is recommended

Notes

15 16

2) Shutter status and speed control

You can control brightness of the screen by the shutter speed.

①Press the SET button to display the setup menu and move the arrow

indicator to ‘SHUTTER’ using the UP or DOWN button.

②Set ‘SHUTTER’ to the desired mode using the LEFT or RIGHT

button.

▶OFF : Deactivation

▶FLK (1/100) : Flicker mode

This manual suits for next models

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications