Speco HT-647HRTP User manual

Other manuals for HT-647HRTP

2

Table of contents

Other Speco Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

HT-647HRTP

540 Line Color Dome Camera

Wall & Ceiling Mountable

Chameleon Cover Included

Please read this manual thoroughly before operation and keep

it handy for further reference.

PACKAGE CONTENTS

•Please make sure that the following items are included

in the package:

1 HT-647HRTP Camera

4 Mounting Screws

1 Chameleon Dome Cover

1 Video Test Lead

Please leave this manual with the end-user for future

reference.

1

PRECAUTIONS

This dome camera should be only installed by qualified

personnel

To prevent a fire or electrical hazard please use proper power

cable

The dome cover should be treated with care

Do not clean the cover with an abrasive cleaning material-

please use a soft cloth or tissue to clean the dome cover

There are no user-adjustable parts inside. Please do not

disassemble this camera other than to make initial

adjustments.

Please use a UL approved regulated 12-volt DC power supply

Please use appropriate low voltage power cable to prevent fire

or electrical shock.

Please insure that your installation area can support the

weight of the camera.

Please handle this camera carefully:

- Don’t use a strong or abrasive detergent when

cleaning the camera.

- Don’t expose the camera to direct sun

2

CAMERA INSTALLATION

Connections :

1. Apply 12-Volts DC ( constant voltage 300mA or better)

-CONNECT POWER TO THE POWER JACK.

2. CONNECT VIDEO CABLE

-CONNECT BNC CABLE TO THE BNC JACK.

YELLOW:VIDEO OUT

POWER SUPPLY

CONNECT

POWER INPUT:RED

CENTER:(+)

3

CHAMELEON DOME INSTALLATION

3. If desired, place the Chameleon Dome over the HT-647HRTP

* Spray the Chameleon Dome with your desired color

* If necessary apply a second coat

* Painting method on Chameleon Dome

●Notes : If painting is desired, please do so before installation

Push the Chameleon Dome over the HT-647HRTP until it snaps into

position.

4

Features

SLC

When the image is in front of strong background lighting,

your camera allows you to get the clear image.

INTENSIFIER

1/3 inch density CCD and digital processor permit

high quality pictures to be captured in very low light

condition.

High Resolution

Horizontal resolution of 540 TV lines is

achieved by using a SONY Double Speed CCD with

410,000 pixels, yielding pictures with a high S/N ratio..

Motion Detection

Built in motion detector with adjustable areas of coverage will

flash a warning on the screen when motion is detected.

5

OSD

All camera functions are menu driven for easy use.

Dynamic Noise Reduction

The Intensifier camera has a DSP chip that can

remove image noise efficiently showing clean

images in low light conditions.

ELECTRONIC DAY/NIGHT

The Intensifier camera can show color pictures in all lighting

conditions, or you can have it automatically switch to a B/W

picture in low light conditions

The Intensifier camera will work with auto iris, manual iris and

fixed iris lenses.

MANUAL / AUTO IRIS LENS

6

Operating your camera

OSD Function

LENS OPTION

●DC ●MANUAL

SETUP MENU

SHUTTER

●OFF ●F/L ●MANUAL

WHITE BALANCE

●ATW ●AWC MANUAL●

BACKLIGHT

●OFF ●LOW ●MIDDLE ●HIGH

AGC

●OFF ●LOW ●MIDDLE ●HIGH

DNR

●OFF ●LOW ●MIDDLE ●HIGH

SENSE UP

●AUTO ●OFF

NEXT PAGE

●CAMERA ID ●DAY/NIGHT ●SYNC

●MOTION DET ●PRIVACY

●REVERSE

●DETAIL ●DEFAULT ●PAGE1

EXIT

7

OSD Menu Setting

LEFT

DOWN

UP

RIGHT

Push the Joy stick for one second, and the OSD appears

on the screen. Move the Joy Stick up, down, left & right to

control the OSD functions.

8

Operating your camera – SETUP

SET UP menu is displayed on the monitor screen.

1. Press the SET button (JOYSTICK) to access the SETUP mode.

2. Select the desired feature using the UP or DOWN button.

Each time you press the UP or DOWN button, the arrow

indicator moves up or down.

Move the arrow indicator to the desired feature item.

If you press RIGHT or LEFT button, it appears available status.

Press the button when gets desired feature.

3. Change the status of the selected feature using the LEFT

or

RIGHT button.

4. When completed, move the arrow indicator to ‘EXIT" and

press

the SET button.

Notes

You can access submenu using SET button.

For the mode with ‘---’, you may not access submenu.

9