Speco O2TML User manual
Please read this manual carefully before operating the unit and keep it for future reference.
O2TML
Temperature Reading Panel with
Face and Mask Recognition
User Manual
v1.0
Important Safeguards and Warnings
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC 1A or more Class2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same time; it
may result in device damage! The product must be grounded to reduce the risk of electric
shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
Heavy stress, violent vibration or exposure to water is not allowed during transportation,
storage and installation.
This product should be installed in a cool, dry place away from direct sunlight and heat
sources.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS
sensor failure. Do not block any ventilation openings.
Do not allow water and liquid intrusion into the camera.
3. Operation and Daily Maintenance
Do not attempt to disassemble the camera; in order to prevent electric shock, do not remove
screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as soon as
possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage to
product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft
dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high
grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may
damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the reversing
image will be received.
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations. Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This manual is for using and managing the product. We may reserve the rights of amending the
typographical errors, inconsistencies with the latest version, software upgrades and product
improvements, interpretation and modification. These changes will be published in the latest
version without special notification.
All pictures, charts, images in this manual are only for description and explanation of our
products. The ownerships of trademarks, logos and other intellectual properties related to
Microsoft, Apple and Google belong to the above-mentioned companies.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
FCC compliance:
This equipment has been tested and found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Note:
Before installation, check the package and make sure that all components are included.
Contact your rep or Speco customer service department immediately if something is broken or
missing in the package.
Temperature Reading Panel with Face and Mask Recognition
Warning
This camera should be installed by qualified personnel only.
All the examination and repair work should be done by qualified personnel.
Any unauthorized changes or modifications could void the warranty.
Statement
This guide is for reference only.
Product, manuals and specifications may be modified without prior notice. Speco
Technologies reserves the right to modify these without notice and without incurring any
obligation.
Speco Technologies is not liable for any loss caused by improper operation.
Regulatory Information
FCC conditions:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
FCC compliance:
This equipment has been tested and found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Note:
Before installation, check the package and make sure that all components are included.
Contact your rep or Speco customer service department immediately if something is broken or
missing in the package.
This device is not intended for use in the diagnosis of any disease or other conditions or in
the cure, mitigation, treatment, or prevention of any disease.
Temperature Reading & Face Recognition Terminal User Manual
Table of Contents
1 Introduction.......................................................................................................................1
2 Network Connection.........................................................................................................2
1.1 LAN ..........................................................................................................................2
1.1.1 Access through IP-Tool.....................................................................................2
1.1.2 Directly Access through IE................................................................................4
1.2 WAN .........................................................................................................................5
3 Temperature Reading & Face Recognition Settings........................................................9
3.1 Temperature Reading Settings....................................................................................9
3.2 Face Match Configuration ..........................................................................................10
3.3 Face Database Management .......................................................................................11
3.4 Mask Detection...........................................................................................................12
4 Live View........................................................................................................................14
4.1 Temperature Reading & Face Recognition View .....................................................14
4.1.1 Temperature Reading Requirements....................................................................14
4.1.2 Temperature Reading & Face Recognition View.................................................15
4.2 Live View via Web......................................................................................................16
5 Access Control Settings ..................................................................................................19
5.1 Door Lock Settings.....................................................................................................19
5.2 Wiegand Settings........................................................................................................19
5.3 Tampering Alarm Settings ..........................................................................................20
6 Other Configurations.......................................................................................................21
6.1 System Settings...........................................................................................................21
6.1.1 Basic Information...................................................................................................21
6.1.2 Date and Time........................................................................................................21
6.1.3 Local Config ..........................................................................................................22
6.1.4 Storage ...................................................................................................................22
6.2 Image Configuration...................................................................................................25
6.2.1 Display Configuration............................................................................................25
6.2.2 Video / Audio Configuration..................................................................................27
6.2.3 OSD Configuration ................................................................................................28
6.2.4 Screen Brightness...................................................................................................29
6.2.5 White Light Control...............................................................................................29
6.2.6 Face Exposure........................................................................................................30
6.3 Alarm Configuration...................................................................................................30
6.3.1 Exception ...............................................................................................................30
6.3.2 SD Card Full ..........................................................................................................32
6.3.3 SD Card Error ........................................................................................................32
6.3.4 IPAddress Conflict ................................................................................................33
6.3.5 Cable Disconnection ..............................................................................................33
6.3.6 Alarm In .................................................................................................................33
6.3.7 Alarm Out...............................................................................................................34
6.4 Network Configuration...............................................................................................35
6.4.1 TCP/IP....................................................................................................................35
6.4.2 Port.........................................................................................................................37
6.4.4 DDNS.....................................................................................................................38
6.4.5 RTSP......................................................................................................................39
6.4.6 UPnP......................................................................................................................40
6.4.7 Email......................................................................................................................40
6.4.8 FTP.........................................................................................................................41
6.4.9 HTTPS...................................................................................................................41
6.5 Security Configuration................................................................................................43
6.5.1 User Configuration.................................................................................................43
6.5.2 Online User............................................................................................................45
6.5.3 Block and Allow Lists............................................................................................45
6.5.4 Security Management.............................................................................................45
6.6 Maintenance Configuration ........................................................................................46
6.6.1 Backup and Restore................................................................................................46
6.6.2 Reboot....................................................................................................................47
6.6.3 Upgrade..................................................................................................................47
6.6.4 Operation Log........................................................................................................48
7 Search .............................................................................................................................49
7.1 Image Search ..............................................................................................................49
7.2 Video Search...............................................................................................................51
7.2.1 Local Video Search ................................................................................................51
7.2.2 SD Card Video Search............................................................................................52
8 Face Match Result Search...............................................................................................55
Appendix.................................................................................................................................56
Appendix 1 Troubleshooting................................................................................................56
Appendix 2 Specifications ...................................................................................................58
Temperature Reading Panel with Face and Mask Recognition
1
1. Introduction
Main Features
•8-inch LCD screen
•Supports IR high-accuracy temperature
measurement
•Can recognize faces with masks
•Triggers voice alarm when abnormal temperature
or a mask-less face is detected
•Deep learning algorithm with high face
recognition accuracy rate
•Supports remote live view and two-way talk
•Wiegand input/output (26 bit/34 bit formats)
•Stand-alone operation
•Includes wallmount plate
2
Temperature Reading & Face Recognition Terminal User Manual
2. Network Connection
Connect O2TML via LAN or WAN. Here only take IE browser for example. The details are
as follows:
1.1 LAN
In LAN, there are two ways to access the O2TML : 1. access through Speco Blue Scanner
2. directly access through IE browser.
1.1.1 Access through the Speco Blue Scanner
Network connection:
①Make sure the PC and O2TML are connected to the LAN and the Speco Blue Scanner is
installed in the PC from the CD or via website download.
②Double click the Speco Blue Scanner icon on the desktop to run this software as shown
below:
③The default IP address setting is set to DHCP. Click the information of the camera listed in
the above table to show the network information on the right hand. Please note the IP
address of the O2TML (shown in red boxes). If needed, you can modify the IP address
to an available static IP address. Make sure and gateway of the camera is in the same
local network segment as the computer's address.
3
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please enter the password of the
administrator and click the “Modify” button to modify the setting.
④Double click the IP address on the Speco Blue Scanner and then the system will pop up
the IE browser to connect the O2TML. If IE is not your default browser, open IE separately
and input the IP address into the URL bar. Follow directions to download, install and run the
Active X control.
Enter the username and password in the login window to log in.
The default password of the administrator is “1234”.
The default username is “admin”; the default password is "1234".
Temperature Reading Panel with Face and Mask Recognition
4
The system will pop up the above-mentioned textbox to ask you to change the
default password. It is strongly recommended to change the default password for account
security. DO NOT LOSE OR FORGET YOUR PASSWORD. If “Do not show again”is
checked, the textbox will not appear next time.
1.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: Obtain from Speco Blue Scanner (ex 192.168.1.2).
Subnet Mask: 255.255.255.0
Gateway: This may be the IP address of your router or DHCP server (ex 192.168.1.1)
HTTP: 80
Data port: 9008
Use the above default settings when logging in the camera for the first time. Directly
connect the camera to the computer through network cable.
①Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Temperature Reading Panel with Face and Mask Recognition
5
Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4). Next, click the “Properties” button to set the network of the PC.
②Open the IE browser and enter the default address of the O2TML and confirm.
③Follow directions to download and install the Active X control.
④Enter the default username and password in the login window and then enter to view.
1.2 WAN
Access through the router or virtual server
Temperature Reading Panel with Face and Mask Recognition
Other manuals for O2TML
1
Table of contents
Other Speco Measuring Instrument manuals
