Sonel MRU-30 User manual

MRU-30 –USER MANUAL

USER MANUAL

EARTH GROUND RESISTANCE METER

MRU-30

SONEL S. A.

Świdnica, Poland

SONEL TEST & MEASUREMENT

Santa Clara, CA 95054

Version 1.05 26.07.2021

MRU-30 –USER MANUAL

The Sonel MRU-30 meter is an easy-to-use instrument that is designed for the safe measurement of

earth ground resistance.

The MRU-30 uses established methods of earth ground resistance measurements such as 3-pole, 4-

pole, and 3-pole with auxiliary clamp. Additionally the MRU-30 employs the two clamp method of

measurement without the use of auxiliary test rods when rods can't be used in some situations.

MRU-30 measurements include: soil resistivity, continuity measurement of protective and equipotential

conductors, leakage currents, and interference voltages.

An integral screen clearly displays results. For safety, and to ensure successful studies, software will

alert the user of possible dangers and irregularities.

The MRU-30 is highly portable, and engineered with a lightweight and compact case. The enclosure

is robust andweatherproof (IP65)to prevent ingress of dust andmoisture, makingit idealfor all outdoor

field work.

It contains a built-in rechargeable battery that can be recharged from a power adapter, or from a stand-

ard 12V vehicle socket.

Please acquaint yourself with this manual to avoid measuring errors and prevent possible problems

related to operation of the meter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequencyenergyand, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the fol-

lowing measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Equipment changes or modifications not expressly approved by SONEL TEST &

MEASUREMENT Inc., the party responsible for FCC compliance, could void the user’s author-

ity to operate the equipment, and could create a hazardous condition.

MRU-30 –USER MANUAL

TABLE OF CONTENTS

1Safety ................................................................................................................5

2Turning the meter ON and activating the screen backlight. .......................6

3Meter configuration .........................................................................................6

4Measurements..................................................................................................9

4.1 Measurement of AC+DC interfering (noise) voltages...............................................9

4.2Earth resistance measurement with 2-pole method (RE2P) ................................... 10

4.3 Earth resistance measurement with 3-pole method (RE3P) ................................... 11

4.4 Earth resistance measurement with 4-wire method (RE4P..................................... 15

4.5 Earth resistance measurement with 3-pole method with additional clamp (RE3P+C)... 18

4.6 Earth resistance measurement with two-clamp method (2C)................................. 22

4.7 Calibration of the measurement clamp C-3............................................................ 24

4.8 Measurement of resistance of protective conductors and equipotential bonding

(RCONT) ................................................................................................................... 26

4.9 Calibration of the test leads for RCONT measurement ............................................. 28

4.10 Earth resistivity measurement (ρ)........................................................................... 29

5Memory of measurement results .................................................................33

5.1 Storing the measurement results in the memory.................................................... 33

5.2 Viewing memory data............................................................................................. 35

5.3 Deleting memory data............................................................................................ 36

5.3.1 Deleting cell data .........................................................................................................36

5.3.2 Deleting bank data.......................................................................................................37

5.3.3 Deleting the whole memory..........................................................................................39

6Data transmission..........................................................................................40

6.1 Computer connection accessories......................................................................... 40

6.2 Data transmission through USB port...................................................................... 40

7Firmware update ............................................................................................41

8Power supply of the meter............................................................................41

8.1 Monitoring the power supply voltage...................................................................... 41

8.2 Charging the rechargeable battery pack ................................................................ 42

8.3 General principles of using Ni-MH batteries........................................................... 43

9Cleaning and maintenance ...........................................................................43

10 Storage............................................................................................................43

11 Dismantling and disposal .............................................................................44

12 Technical specifications ...............................................................................44

12.1 Basic data .............................................................................................................. 44

12.2 Additional data ....................................................................................................... 47

12.2.1 Influence of the serial interference voltage UZon earth resistance measurements for

methods RE3P, RE4P, RE3P+C, ρ.................................................................................47

12.2.2 Influence of the auxiliary electrodes on earth resistance measurements for methods

RE3P, RE4P, RE3P+C, ρ...............................................................................................47

MRU-30 –USER MANUAL

12.2.3 Influence of the interference current IZon the result of the earth resistance for method

RE3P+C....................................................................................................................... 47

12.2.4 Influence of interference current on the result of the earth resistance measurement for

two-clamp method (2C)...............................................................................................48

12.2.5 Influence of the relation of the resistance measured with clamp for the multiple earthing

branch to the resultant resistance (RE3P+C)................................................................48

12.2.6 Additional uncertainties in accordance with IEC 61557-5 (RE3P, RE4P).......................48

13 Accessories ................................................................................................... 49

13.1 Standard accessories.............................................................................................49

13.2 Optional accessories ..............................................................................................49

14 Manufacturer.................................................................................................. 50

15 Laboratory services ...................................................................................... 51

MRU-30 –USER MANUAL

1 Safety

Electrical safety depends on the correct design and function of earth/ground systems. The MRU-

30 meter has been designed to measure earth/ground installations. For correct operation and correct

results, understand and follow these recommendations:

Before you proceed to operate the meter acquaint yourself thoroughly with this manual and observe

all safety regulations.

The MRU-30 meter has been designed for measurements of earth/ground connections, equipoten-

tial bonding, and ground resistivity. Any application or use of the MRU-30 that differs from those

specified in this manual may result in damage to the meter and constitute a source of danger to the

user.

The device must be operated by appropriately qualified personnel with relevant certification to carry

out measurements of electric installations. Operation of the meter by unauthorized personnel may

result in damage to the device and constitute a source of danger to the user.

Using this manual does not exclude the need to comply with occupational health and safety regu-

lations and other relevant fire regulations required during the execution of a particular type of work.

Before starting work with the device in special environments, e.g. those with potential fire-risk or

explosive environments, consult with the individual responsible for health and safety.

Do not operate the meter in the following situations:

A meter that is damaged or completely or partially malfunctioning.

A meter with damaged test leads or insulation.

A meter stored for long periods in unfavorable conditions (e.g. excessive humidity or tempera-

ture extremes). If the meter is transferred from a cold to a warm environment with a high

level of relative humidity internal condensation can occur. Do not operate until the meter

has reached the new ambient temperature (approximately 30 minutes).

Before operation make sure the test leads are securely connected to the appropriate measurement

sockets.

Do not power the meter from sources other than those described in this manual.

The meter’s inputs are electronically protected from power surges in case of accidental connection

to live conductors: up to 276 V for 30 seconds.

Manufacturer’s calibration does not include test leads resistance. The displayed result is the sum

of the measured object and the test leads resistance. The procedure for calibrating for test lead

resistance is described in section 4.9.

The device complies with the following standards: EN 61010-1 and EN 61557-1, -4, -5.

Note:

Due to continuous development the manufacturer reserves the right to change appearance,

the accessories, and technical parameters of the meter. The display, in case of some of the

functions, may also slightly differ from the display presented in this manual.

MRU-30 –USER MANUAL

2 Turning the meter ON and activating the screen backlight.

Turn on the meter with the button.

Short press the button to turn the

screen backlight on; press the button

again to turn the backlight off.

Switch off the meter by pressing and

and holding the button for approx.

2 sec.

Emer-

gency si-

tuations.

Pressing the button for approx. 7

seconds will turn off the meter in case

of emergency.

3 Meter configuration

Turn on the meter by pressing the

button and the SET/SEL button simulta-

neously.

When the Fn screen is displayed use the

and buttons to set the local mains

frequency –50 Hz or 60 Hz (50 Hz is set

as default).

MRU-30 –USER MANUAL

Use the and buttons to show bEEP

on the screen to allow turning audio sound

on or off.

Use the and buttons to turn the au-

dio sound ON ( ) or OFF ( ).

Press the and buttons to show the

oFF screen to allow the setting of the

auto-power off time (Auto-OFF):

Use the and buttons to set the

time to turn the meter off automatically

(Auto-OFF): The choices are 300 s, 600 s,

900 s or none (dashes - Auto-OFF is disa-

bled).

MRU-30 –USER MANUAL

Use the and buttons to show the

diSt screen to allow the unit of length to be

selected:

Use the and buttons to set the unit

of length: ‘m’(meters) or ‘ft’(feet) (‘m’is

set as default).

Use and buttons to show the UPdt

screen to install new firmware updates.

Press ENTER to enter firmware update mode.

The update process is described in section 7.

After changing the parameters, to exit the SETUP menu, either:

Press the ENTER button to memorize set-

tings (not applicable for the Update screen)

Or: press the ESC button to go to the meas-

urement screen without confirming changes.

Other manuals for MRU-30

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual