Siemens RHFL User manual

1 / 4

Through Door Mounted Rotary Handle Operator Kit

Juego de operador Giratorio Montado a Través de la Puerta.

Par la Porte kit RotatoireMonté d‘Opérateur de Poignée.

For Use With Frame JG, LG

Para Usar Con Caja Base JG, LG

Installation Instructions / Instructivo de Instalación

Use only with Siemens certified Components.

Utilizar únicamente con componentes certificados de Siemens.

A utiliser uniquement avec les composants certifiés Siemens.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

I.L. No. 806828A01

U.S. Cat. No. Euro Order No.

Item: RHFL 3VL9400-3JA01

RHFLEM 3VL9400-3JB01

7/16”

Ø.28”

[ 7.1 mm ]

Ø .38“

[ Ø 9.5 ]

RHFL / 3VL9400-3JA01

RHFLEM / 3VL9400-3JB01

- 2 X 1/4– 20 X 1/2”

- 3 X 6-32 X .25”

- 2 X M4 X 12mm

- 2 X 1/4 -20

- 2 X 1/4 – 20

-2XNo.8

NEMA Type 1 and 12

[ NEMA Tipo 1 y 12 ]

806828A01

NOTE - These instructions do not purport to cover

all details or variations in equipment, or to provide

for every possible contingency to be met in

connection with installation, operation or maintenance.

Should further information be desired or

should particular problems arise, which are not

covered sufficiently for the purchaser’s purposes,

the matter should be referred to the local Siemens

sales office. The contents of this instruction

manual shall not become part of or modify any

prior or existing agreement, commitment or

relationship. The sales contract contains the entire

obligation of Siemens. The warranty contained in

the contract between the parties is the sole

warranty of Siemens. Any statements contained

herein do not create new warranties or modify the

existing warranty.

Trademarks - Unless otherwise noted, all names

identified by ® are registered trademarks of

Siemens AG or Siemens Industry, Inc.

The remaining trademarks in this publication may

be trademarks whose use by third parties for their

own purposes could violate the rights of the owner.

2 X 35 lb.in.

[ 4 Nm ]

- 2 X 1/4 – 20

7/16”

2/4

2 X 35 lb.in.

[ 4 Nm ]

2 X 1/4 – 20 X 1/2”

2 X 1/4 -20 -

2 X 18 lb. in.

[ 2 Nm ]

- 2 X M4 x 12mm

2 X No. 8 -

Trip

[ Interrumpir ]

Test:

[ Prueba: ]

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

3/4

3 X 6-32 X .25”

11 lb.in.

[ 1 Nm ]

D > 3.94” + ( P X .20” )

[ D > 100 mm + ( P X 5mm ) ]

P < 2.0” [ P < 51mm ]

Reset

[ Restablecer ]

ON / I

clac

Trip OK

[ Interrumpir ]

For Support in Europe refer to :

Bestell-Nr. / Order No.: 3ZX1012-0VL68-1AA9 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6828-10 DS 02

Option:

[ Opción: ]

1 - 3 / Ø.20” - .32”

[1-3 / Ø5-8mm] 3

Subject to change without prior notice © Siemens Industry Inc. 2010

Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.

Technical Support: Toll Free: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution

4 / 4 806828A01

5.31 [135.0]

.35 [9.0]

.87 [22]

.52 [13]

1.74 [44]

2.96 [75]

90°

ON / I

OFF / O

9.75 [ 247.5 mm ]

5.31 [ 135mm ]

.87 [ 22 mm ] ( 3P & 4P )

4 X Ø.28 [ 7.1 mm ]

or [ o ]

threaded hole 1/4-20

[ rosca de tornillo

1/4-20 ]

.87 [ 22 mm ] ( 3P )

2.61 [ 66 mm ] ( 4P )

This manual suits for next models

Other Siemens Control Unit manuals

Siemens

Siemens SENTRON User manual

Siemens

Siemens SIWAREX JB User manual

Siemens

Siemens ECOFAST 3RK1911-4AA Series User manual

Siemens

Siemens SIMATIC S5 User manual

Siemens

Siemens FCM-6S User manual

Siemens

Siemens SIMATIC IOT2000 Series User manual

Siemens

Siemens SIMATIC CC712 User manual

Siemens

Siemens 7SA513BB Series Operating and installation instructions

Siemens

Siemens SIMATIC EP200SP User manual

Siemens

Siemens XDACT-ASSY User manual

Siemens

Siemens SINUMERIK 828D PPU Series User manual

Siemens

Siemens S-60 User manual

Siemens

Siemens LVM User manual

Siemens

Siemens Simatic S7-300 User manual

Siemens

Siemens Simatic S5 IP 240 Technical Document

Siemens

Siemens SIMATIC ET 200SP Technical Document

Siemens

Siemens AE-30U User manual

Siemens

Siemens Q3920 User manual

Siemens

Siemens SIMATIC RTLS4330G User manual

Siemens

Siemens SIMOTION D4 5 Series User manual

Siemens

Siemens SINUMERIK 802D Installation guide

Siemens

Siemens LMV 5 Series Operator's manual

Siemens

Siemens ACVATIX VPF43 Series User manual

Siemens

Siemens Synco RMZ792 Operator's manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual