Siemens SITOP User manual

SIEMENS AG ÖSTERREICH, 05.2001 1/ 8 SITOP Zusatzmodul Netzpufferung

SITOP 6EP1961-3BA00

Puffermodul

Mains buffer module

Betriebsanleitung Best. Nr.: C98130-A7541-A1-01-6419

Operating instructions

Instructions

Istruzioni di servizio

Instrucciones

SIEMENS AG ÖSTERREICH, 05.2001 2/ 8 SITOP Zusatzmodul Netzpufferung

Maßbild

Dimension drawings

Encombrement

Disegno quotato

Croquis acotado

Verdrahtungshinweis

Wiring information

Remarque relative

au câblage

Indicazione per il

cablaggio

Información para

cableado

Hinweis

Diese Betriebsanleitung enthält aus Gründen der Übersichtlichkeit nicht sämtliche Detailinformationen zu allen Typen des Produkts und kann auch nicht jeden

denkbaren Fall der Aufstellung, des Betriebes oder der Instandhaltung berücksichtigen. Weiterführende Hinweise erhalten Sie über die örtliche Siemens-

Niederlassung bzw. über die Homepage http://www.siemens.de/sitop. Technische Änderungen jederzeit vorbehalten. In Zweifelsfällen gilt der deutsche Text

Note

These instructions cannot claim to cover all details of possible equipment variations, nor in particular can they provide for every possible example of installation,

operation or maintenance. Further information is obtainable from your local Siemens office or see homepage http://www.siemens.de/sitop. Subject to change

without prior notice. The German text applies in cases of doubt

Note

Pour des raisons de clarté, cette notice ne contient pas toutes les informations de détail relatives à tous les types du produit et ne peut pas non plus tenir compte

de tous les cas d'installation, d'exploitation et de maintenance imaginables. Pour de plus amples informations, veuillez-vous adresser à votre agence Siemens

ou consultez notre site http://www.siemens.de/sitop. Sous réserve de modifications techniques. En cas de divergences, le texte allemand fait foi

Nota

Ai fini della chiarezza le presenti istruzioni di servizio non contengono tutte le informazioni dettagliate su tutti i tipi del prodotto e non possono nemmeno trattare

tutti i casi di installazione, di esercizio o di manutenzione. Per ulteriori informazioni rivolgersi alla filiale Siemens di zona o consultare la homepage

http://www.siemens.de/sitop. Ci riserviamo eventuali modifiche tecniche. In caso di differenze o problemi è valido il testo tedesco

Nota

Por razones de claridad, estas instrucciones no contienen todas las informaciones detalladas relativas a todos los tipos del producto ni pueden considerar todos

los casos de instalación, de operación y de mantenimiento imaginables. Para más información, contacte con la sucursal local de Siemens o visite la Web

http://www.siemens.de/sitop. Sujeto a cambios técnicos sin previo aviso. En casa de duda, prevalece el texto aleman.

Last

load

7,1

120,5

132,2

126,5

125

44,7

SIEMENS AG ÖSTERREICH, 05.2001 4/ 8 SITOP Zusatzmodul Netzpufferung

English

!WARNING

Hazardous voltages are present in certain parts of this electrical equipment during operation.Incorrect handling of the

equipment can result in death, severe personal injury or substantial property damage. Only qualified personnel are allowed

to work on or around this equipment. The successful and safe operation of this equipment is dependent on proper transport,

storage and installation.

Before installation or maintenance work is carried out, the mains switch must be switched off and locked to prevent it from

being switched on again. If these rules are not adhered to, contact with live parts or improper use can result in death or

severe personal injury.

CAUTION

The device may only be opened by qualified personnel. Electrostatically sensitive devices (ESD)

Description

The optional mains buffer module is a built-in device belonging to the SITOP series.

The device must be installed taking into account all relevant DIN/VDE specifications and other national standards.

It is used in combination with a stabilized 24 V load power supply unit (SITOP 20A (6EP1436-3BA00) or SITOP 40A (6EP1437-3BA00)) to

buffer the load current if the AC power supply is interrupted temporarily.

The buffer module is connected in parallel with the SITOP load power supply unit. The "+" input of the buffer module must be connected to

the "+" output of the power supply unit for this purpose, and the "-" input of the buffer module to the "-" output of the power supply unit (see

wiring information on page 2). The buffer module must be wired with the same conductor cross-section as the output cable of the power

supply.

Technical data

Input variables

Rated input voltage Ue:

24 V DC

Operating voltage range:

24...28.8 V

Output variables

Output DC voltage Ua: in buffer mode:

Ue– 1 V

Output DC current Ia:

0 - 40 A

Mains buffering :

with 40 A load current: 100 ms

with 20 A load current: 200 ms

The buffering time is longer for smaller load currents.

The maximum possible buffering time is 3 seconds.

Protection and monitoring

function

Static current limiting:

typ. 40 A

Signaling:

Green LED: Supply voltage >20.5 V

Ambient

Temperature

Storage and transport: -25 to +85°C

Operation: 0 to +60°C

Humidity rating corresponds to climatic category

3K3 acc. to EN60721 Part 3, no condensation

Natural air cooling

Specifications

Degree of protection: IP20 acc. to IEC 529

Safety class 1 acc. to IEC 536

Safety acc. to VDE 0160 and VDE 0805

(EN 60950): SELV

Emitted interference acc. to EN50081-1

Radio interference suppression acc. to EN

55022, limit curve B

Noise immunity acc. to EN 50082-2, incl. Table

UL 508 / CSA 22.2 in preparation

Weight

1,2 kg

Installation

Mounting on a DIN EN 50022-35x15/7.5 standard rail. To ensure adequate cooling, the device must be installed vertically, with the

terminals at the bottom. Be sure to leave a minimum clearance of 50 mm above and below the device.

Connections and terminal assignment

Terminals Function Terminal range Remarks

1, 2Output voltage DC 24 V 0.33 to 10mm2

AWG 22 to 8 Screw-type terminals. Use a screw driver with a blade width of

5 mm. Recommended tightening torque 1.2 Nm.

Other manuals for SITOP

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens FDK:521H1134 User manual

Siemens

Siemens SINUMERIK 840D sl Instruction sheet

Siemens

Siemens Simatic S7-1500/ET 200MP User manual

Siemens

Siemens SIRIUS K60 Series User manual

Siemens

Siemens FDCIO223 User manual

Siemens

Siemens 7KM4211-1BA00-3AA0 User manual

Siemens

Siemens SINUMERIK 840DE SL Quick start guide

Siemens

Siemens MJ-X Series User manual

Siemens

Siemens SIRIUS 3TK2834 User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens VKF46 Series User manual

Siemens

Siemens SIMATIC 505 Operating instructions

Siemens

Siemens CLM Series Guide

Siemens

Siemens SIJECT 16i User manual

Siemens

Siemens HZM User manual

Siemens

Siemens SIMATIC FM 351 User manual

Siemens

Siemens SIMOTION D4 5 Series User manual

Siemens

Siemens SINUMERIK 828D Turning Owner's manual

Siemens

Siemens SIMATIC FM 450-1 User manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens SINAMICS G120P Assembly instructions

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens QAW910 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual