Siemens TMM-1 User manual

P/N 315-092099-6

Installation Instructions

Model TMM-1

Telephone Master Module

INTRODUCTION

The optional Model TMM-1 Telephone Master

Module from Siemens Industry, Inc. provides

firefighters with an emergency telephone

system for communications with remote loca-

tions. The TMM permits five telephones to be

off-hook at the same time with minimal loss of

quality in the sound. This module also has a

warden’s page feature that permits paging

through the speaker zones from the master

telephone as well as from remote locations.

(See Figure 1.)

The push-to-talk button on the TMM-1 Tele-

phone Master module connects the red master

telephone to the MXLV system through the

telephone riser. It also provides the signal for

the warden’s page. The warden’s page is

controlled by the ACM-1 and selected by a

VSM-1 module. For more information about the

MXLV system, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

(Refer to Figure 2)

To mount the TMM-1 module:

1. Mount the TMM-1 on the MKB-2 panel to

the right side of the keyboard/annunciator

display (as viewed from the front).

2. Remove the black filler plate on the right

side of the keyboard/annunciator display

and discard.

3. From the front of the panel, insert the TMM-1

studs through the holes in the MKB-2 panel,

and from the rear of the panel secure the

studs with the three No. 8 nuts supplied.

4. Mount the electronics assembly to the rear of

the TMM-1 housing by placing it over the four

snap studs on the side of the rear. Be sure

that the 14 pin connector (P3) is at the bottom

of the assembly. Then press down on the

board to seat it firmly. (Refer to Figure 3.)

Figure 1

TMM-1 Module

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

INSTALLING THE TMM-1

(Refer to Figure 2)

Install the cables from the module to the

paired connectors as follows:

1. Connect the two wire cable from the hole at

the rear of the telephone housing to P2 on the

left of the PC board mounted on the TMM.

2. Connect the four wire cable provided (P/N

600-180364) between P1 at the top of the

TMM-1 PC board and P5 on the TBM-1, which

is located on the right in the system backbox.

3. Connect the 14 position ribbon cable provided

(P/N 555-192236) between P3 on the TMM-1

and P1 on the adjacent ACM-1 module.

ELECTRICAL RATINGS

Figure 2

Mounting the TMM-1 Module

P/N 315-092099-6

Figure 3

Installing the TMM-1 Module

tnerruCeludoMCDV5evitcAAm0

tnerruCeludoMCDV42evitcAAm14

tnerruCeludoMCDV42ybdnatSAm02

Other Siemens Control Unit manuals

Siemens

Siemens Siwarex U User manual

Siemens

Siemens SIJECT 16i User manual

Siemens

Siemens EVG4U10E Series User manual

Siemens

Siemens RMB795B Operator's manual

Siemens

Siemens SINUMERIK Series Parts list manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens SIWAREX MS Application guide

Siemens

Siemens SIRIUS 3TK2834 User manual

Siemens

Siemens SIPROTEC 7VE61 User manual

Siemens

Siemens AP 641 Service manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens LOGO! Series User manual

Siemens

Siemens SIRIUS ACT 3SU1400-2EM10-6AA0 User manual

Siemens

Siemens 8F-DI Ex NAMUR User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SIMATIC ET 200SP TM ECC 2xPWM ST User manual

Siemens

Siemens SINUMERIK 802D User manual

Siemens

Siemens SIMATIC ET 200AL User manual

Siemens

Siemens LFL Series Owner's manual

Siemens

Siemens SIMATIC RTLS4330G User manual

Siemens

Siemens SIRIUS ACT 3SU1400-1GC10-1AA0 User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens VGD20.253U Owner's manual

Siemens

Siemens SIMATIC PCS 7 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual