Siemens SIMATIC 8DO DC24V/0.5 A User manual

SIMATIC ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

_____________

Preface

Properties

Diagnostics

SIMATIC

ET 200S distributed I/O

Digital electronic module

8DO DC24V/0.5 A

(6ES7132-4BF00-0AA0)

Manual

04/2007

A5E01077385-01

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

WARNING

This device may only be used for the applications described in the catalog or the technical description and only

in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,

positioning and assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90327 NÜRNBERG

GERMANY

Ordernumber: A5E01077385-01

Ⓟ 12/2007

Technical data subject to change

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Manual, 04/2007, A5E01077385-01 3

Preface

Purpose of the manual

This manual supplements the

ET 200S Distributed I/O System

Operating Instructions.

General functions for the ET 200S are described in the

ET 200S Distributed I/O System

Operating Instructions.

The information in this document along with the operating instructions enables you to

commission the ET 200S.

Basic knowledge requirements

To understand these operating instructions you should have general knowledge of

automation engineering.

Scope of the manual

This manual applies to this ET 200S module. It describes the components that are valid at

the time of publication.

Recycling and disposal

Thanks to the fact that it is low in contaminants, this ET 200S module is recyclable.

For environmentally compliant recycling and disposal of your electronic waste, please

contact a company certified for the disposal of electronic waste.

Additional support

If you have any questions relating to the products described in these operating instructions,

and do not find the answers in this document, please contact your local Siemens

representative.

http://www.siemens.com/automation/partner

The portal to our technical documentation for the various SIMATIC products and systems is

available at:

http://www.siemens.com/automation/simatic/portal

The online catalog and ordering system are available at:

http://www.siemens.com/automation/mall

Preface

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

4 Manual, 04/2007, A5E01077385-01

Training center

We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation

system. Please contact your regional training center or the central training center in

D -90327, Nuremberg, Germany.

Phone: +49 (911) 895-3200.

http://www.siemens.com/sitrain

Technical Support

You can reach technical support for all A&D projects

● using the support request web form:

http://www.siemens.com/automation/support-request

● Phone: + 49 180 5050 222

● Fax: + 49 180 5050 223

For more information about our technical support, refer to our Web site at

http://www.siemens.de/automation/service

Service & Support on the Internet

In addition to our documentation services, you can also make use of our comprehensive

online knowledge base on the Internet.

http://www.siemens.com/automation/service&support

There you will find:

● Our Newsletter, which constantly provides you with the latest information about your

products.

● The right documentation for you using our Service & Support search engine.

● The bulletin board, a worldwide knowledge exchange for users and experts.

● Your local contact for Automation & Drives in our contact database.

● Information about on-site services, repairs, spare parts. Lots more can be found on our

"Services" pages.

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Manual, 04/2007, A5E01077385-01 5

Table of contents

Preface ...................................................................................................................................................... 3

1 Properties .................................................................................................................................................. 7

1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0).........................................7

2 Diagnostics.............................................................................................................................................. 13

2.1 Diagnostics using LED display.....................................................................................................13

Index........................................................................................................................................................ 15

Table of contents

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

6 Manual, 04/2007, A5E01077385-01

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Manual, 04/2007, A5E01077385-01 7

Properties 1

1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Properties

● Digital electronic module with eight outputs

● Output current 0.5 A per output, aggregate current 4 A

● Rated load voltage 24 VDC

● Short-circuit protection

● Suitable for solenoid valves, DC contactors, and indicator lights

● Supports isochronous operation

Requirements for operation

It is possible to operate the 8DO 24 V DC/0.5 A digital electronic module with the following

interface modules, as of the specified order numbers. The interface modules listed in the

table are not subject to any constraints.

Interface module Order number (or higher) Firmware version

(or higher)

IM 151-1 STANDARD 6ES7151-1AA03-0AB0 ---

IM 151-1 FO STANDARD 6ES7151-1AB02-0AB0 ---

IM 151-1 HIGH FEATURE 6ES7151-1BA01-0AB0 V2.1.3

IM 151-3 PN

IM 151-3 PN HIGH FEATURE

IM 151-3 PN FO

6ES7151-3AA20-0AB0

6ES7151-3BA20-0AB0

6ES7151-3BB21-0AB0

V4.0.1

General terminal assignment

Note

Terminals A4, A8, A3 and A7 are only available at specified terminal modules.

Properties

1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

8 Manual, 04/2007, A5E01077385-01

Terminal assignment for 8DO DC24V/0.5A (6ES7132-4BF00-0AA0)

Terminal Assignment Terminal Assignment Notes

1 DO

0 5 DO

2 DO

2 6 DO

3 DO

4 7 DO

4 DO

6 8 DO

A4 AUX1 A8 AUX1

A3 AUX1 A7 AUX1

•DOn: Output signal, Channel n

•AUX1: M chassis ground (from power module) or potential bus

(freely usable up to 230 VAC)

Usable terminal modules

Usable terminal modules for 8DO DC24V/0.5A (6ES7132-4BF00-0AA0)

TM-E15C26-A1

(6ES7193-4CA50-0AA0)

TM-E15C24-01

(6ES7193-4CB30-0AA0)

Spring terminal

TM-E15S26-A1

(6ES7193-4CA40-0AA0)

TM-E15S24-01

(6ES7193-4CB20-0AA0)

Screw-type terminal

TM-E15N26-A1

(6ES7193-4CA80-0AA0)

TM-E15N24-01

(6ES7193-4CB70-0AA0)

Fast Connect

















$8; 























0$8;

ZLUH

:LULQJH[DPSOHV

Properties

1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Manual, 04/2007, A5E01077385-01 9

Two-wire connection

The following configuration example shows a 2-wire connection with the electronic modules

8DO DC24V. You require further terminals so that sufficient terminals are available for the

chassis ground connection M when the TM-E15S26-A1 terminal modules are used. In the

example this is implemented by the add-on terminal TE-U120S4x10 that can be mounted as

from a width of 120 mm (8 EMs). You can naturally also use other terminals for this

configuration (for example, ET 200S potential distribution module 4POTDIS).

$8;

 



























































































 

































































































'&9

① Terminal module TM-P15S23-A0

② Power module PM-E 24 VDC

③ Electronic modules 8DI DC24V

④ Terminal modules TM-E15S26-A1

⑤ Actuators in 2-wire connection

⑥ Add-on terminal TE-U120S4x10

Properties

1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

10 Manual, 04/2007, A5E01077385-01

Block diagram

/

3

3

















(76

EDFNSODQH

EXV

FRQQHFWLRQ

%DFNSODQHEXV

5HYHUVHSRODULW\

SURWHFWLRQ

Figure 1-1 Block diagram of the 8DO DC24V/0.5A

Technical data 8DO DC24V/0.5A (6ES7132-4BF00-0AA0)

Dimensions and weight

Width (mm) 15

Weight Approx. 40 g

Module-specific data

Supports isochronous operation Yes

Number of outputs 8

Length of cable

•Unshielded max. 600 m

•Shielded max. 1,000 m

Parameter length 3 bytes

Address space 1 byte

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens IM 153-4 PN User manual

Siemens

Siemens 8DO User manual

Siemens

Siemens CZM-4 User manual

Siemens

Siemens ZIC-4A Service manual

Siemens

Siemens SINAMICS S120 Technical Document

Siemens

Siemens QUADLOG Quick guide

Siemens

Siemens RUGGEDCOM RS900 User manual

Siemens

Siemens SINUMERIK 840Di sl User manual

Siemens

Siemens FT2001-A1 User manual

Siemens

Siemens 6ES5-424 Product manual

Siemens

Siemens Simatic S7-1500/ET 200MP User manual

Siemens

Siemens SZE-4X User manual

Siemens

Siemens SINUMERIK 840D User manual

Siemens

Siemens SIRIUS ACT 3SU1400-1EK10-6AA0 User manual

Siemens

Siemens RMH760B User manual

Siemens

Siemens SINAMICS DCM Datasheet

Siemens

Siemens SIMOTION D410 User manual

Siemens

Siemens HiPath optiPoint 410 Instruction Manual

Siemens

Siemens PXA30 Series User manual

Siemens

Siemens ET 200S 1SI Parts list manual

Siemens

Siemens CU240S DP-F User manual

Siemens

Siemens SIWAREX FTC Application guide

Siemens

Siemens SIRIUS 8WD44 28-0B User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual