Shuttle FB62 User manual

FB62

Pentium4/Celeron,478-pinProcessor

Based MAIN BOARD

Shuttle®FB62

Pentium 4/Celeron , 478-pin Processor Based Mainboard

Manual Version 1.0

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel, Pentium is a registered trademarks of Intel Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used in this manual are ascribed to their respective

owners and acknowledged.

M782

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName:FB62

S/N:

CPU:

External Frequency: 100 MHz

Intel P4 1.6/1.8/2.0/2.2/2.4GHz

External Frequency: 133 MHz

IntelP42.26/2.40/2.53/2.66/2.80/3.06GHz

External Frequency: 200 MHz

IntelP4 2.8G /3.0G

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: four ports with 4 pins respectively

Parallel Port: one port with 9 pins

LAN Port: two port with 8 pins

VGA Port: one port with 15 pins

Line-Out & Line-In & Mic-In Ports: one port for each

DDR Memory: 128 MB *2

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Remedy:N/A

EMIInterference:

Crystal:14.318MHz(X2)/24.576MHz(X6)/25.00MHz(X4)/32.768KHz(X1)

Clock Generator: U5

Test Mode External Frequency CPU Case Open/Close

1133MHz Pentium4 3.06GHz Close

2133MHz Pentium4 3.06GHz Open

3100MHz Pentium4 2.4GHz Close

4100MHz Pentium4 2.4GHz Open

5200MHz Pentium4 3.0GHz Close

6200MHz Pentium4 3.0GHz Open

(D) Supported Host Peripherals:

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI orAGP door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Host Peripheral Product Name Model Name S/N FCC ID

#1 Case SB61 N/A

#2 Power Supply (300W) AM630BS20S 0005596 D33047

#3 Maxtor HDD (40GB) D740X-6L 3902B975

#4 Panasonic FDD JU-257A606P

#5 CODE DVD Player DVD-116 AAMS027197WL 3892D029

- 1 -

TABLE OF CONTENTS

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6

EXPERIENCEDDIY USER ........................................................................ 6

SYSTEMINTEGRATOR............................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION.......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FB62.............................................................................11

STEP1 CPUInstallation........................................................................ 12

STEP 2 Set Jumpers............................................................................. 13

STEP3 InstallDDRSDRAM SystemMemory........................................ 13

STEP 4InstallInternal PeripheralsinSystem Case ................................ 14

STEP5 Mountthe Mainboard onthe ComputerChassis........................ 15

STEP6Connect FrontPanelSwitches/LEDs/USB/MIC/Line-in/Line-out 16

STEP 7 Connect IDE, Floppy, and SerialATA Disk Drives ..................... 18

STEP8Connect OtherInternalPeripherals............................................ 19

STEP9 ConnectthePower Supply........................................................ 21

STEP10 InstallAdd-on Cards inExpansion Slots .................................. 21

STEP11 ConnectExternal Peripherals toBack-Panel........................... 22

STEP 12 First Time System Boot Up ..................................................... 23

STEP13 InstallDrivers & SoftwareComponents ................................... 24

- 2 -

3.2 JUMPER SETTINGS ................................................................................. 25

JUMPERS& CONNECTORSGUIDE.................................................... 26

Jumpers

Clear CMOS Setting (JP1) ................................................................... 28

Back-Panel Connectors

COM1Port Connector ........................................................................... 29

VGAPortConnector .............................................................................. 29

USB0/1Port Connectors ....................................................................... 29

10/100base-T LAN Port Connector....................................................... 29

USB2/3Port Connectors ....................................................................... 29

PS/2Keyboard & PS/2 Mouse Connectors............................................ 30

Bass/Center-OutPortConnector ........................................................... 30

Rear-OutPortConnector ...................................................................... .30

Front-OutPortConnector....................................................................... 30

Front-Panel Connectors

ATXPower On/OffSwitch Header(PWON)............................................ 31

HDD LED Header (HLED).................................................................... 31

Green LED / Power LED Header (GLED/PLED) .................................. 32

HardwareReset Header (RST) ............................................................. 32

FrontPanelConnector (JP16) ............................................................... 33

Internal Peripherals Connectors

EnhancedIDE andFloppy Connectors................................................... 34

SerialATAConnectors........................................................................... 34

Other Connectors

ATXPower Supply Connector (ATX1andATX2).................................... 35

Systemand ChipsetFan Connector(FAN1/2/3)..................................... 36

AudioCD_IN Connector(JP11) (Black) ................................................. 36

WirelessKeyboard and Mouse Headers (JP6) ..................................... 36

- 3 -

ParallelPort Header (JP8)..................................................................... 37

IRHeader(JP7)..................................................................................... 37

SPDIF-Out/InHeader(JP3) ................................................................... 38

ExtendUSB Header (USB4).................................................................. 38

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 39

INSTALLMEMORY............................................................................... 39

UPGRADEMEMORY............................................................................ 39

4 SOFTWARE UTILITY ......................................................................40

4.1 Mainboard CD Overview ......................................................................... 40

4.2 Install Mainboard Software ..................................................................... 41

4.2.A Install Intel Chipset Driver.................................................................... 42

4.2.B Install VGA Driver ................................................................................. 42

4.2.C Install USB 2.0 Driver ........................................................................... 43

4.2.D Install Realtek Audio Driver ................................................................. 43

4.2.E Install Realtek LAN Driver.................................................................... 44

4.2.F Install Intel LAN Driver.......................................................................... 44

4.2.G Install RAID Driver(Only for WinXP) .................................................... 45

4.3 Install Utility Driver................................................................................... 46

4.4 View the User's Manual........................................................................... 47

5 BIOS SETUP ................................................................................... 48

5.1 ENTER BIOS ............................................................................................. 48

5.2 THE MAIN MENU ...................................................................................... 49

STANDARD CMOS FEATURES ............................................................... 51

ADVANCED BIOS FEATURES................................................................. 54

ADVANCED CHIPSET FEATURES .......................................................... 58

INTEGRATEDPERIPHERALS .................................................................. 61

- 4 -

POWERMANAGEMENT SETUP.............................................................. 67

PNP/PCICONFIGURATIONS .................................................................... 71

PCHEALTH STATUS ................................................................................ 73

FREQUENCY/VOLTAGECONTROL ......................................................... 75

LOAD FAIL-SAFE DEFAULTS .................................................................. 76

LOADOPTIMIZEDDEFAULTS ................................................................. 76

SET PASSWORD ..................................................................................... 77

SAVE & EXIT SETUP................................................................................ 78

EXITWITHOUTSAVING ............................................................................ 78

- 5 -

WHAT'S IN THE MANUAL

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look.......................................................Page 25

Drivers/Software Utilities >> How to Install .........................................Page 40

BIOS Setup >> How to Configure.........................................................Page 48

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

- 6 -

1INTRODUCTION

1.1 To Different Users

First-Time DIY System Builder

Welcome to the DIY world! Building your own computer system is not as diffi-

cult as you may think. To make your first computer DIY experience successful,

right from the start, we have designed the 3.1 Hardware Installation section

in a step-by-step fashion for all the first-time DIY system builders. Prior to

installation, we also suggest you to read the whole manual carefully to gain a

complete understanding of your new Shuttle FB62 mainboard.

Experienced DIY User

Congratulate on your purchase of the Shuttle FB62 mainboard. You will find

that installing your new Shuttle FB62 mainboard is just easy. Bundled with an

array of onboard functions, the highly-integrated FB62 mainboard provides you

with a total solution to build the most stable and reliable system. Refer to sec-

tions 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to

find out how to get the best out of your new mainboard. Chapter 5 BIOS

Setup also contains the relevant information on how to tune up your system to

achieve higher performance.

System Integrator

You have wisely chosen Shuttle FB62 to construct your system. Shuttle FB62

incorporates all the state-of-the-art technology of the Intel82865G+82801ER

chipset from Intel. It integrates the most advanced functions you can find to

date in a compact Small Form Factor ATX board.

Table of contents

Other Shuttle Motherboard manuals

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual