Shuttle AB60/R User manual

AB60/R

Pentium4/Celeron

478-pin Processor Based MAIN BOARD

User's Manual

Shuttle®AB60/R

Pentium 4/Celeron , 478-pin processor based Mainboard

Manual Version 1.2

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle®Inc.

Disclaimer

Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.

Information in this manual has been carefully checked for reliability; however, no guarantee is

given as to the correctness of the contents. In the interest of continued product improvement,

this company reserves the right to revise the manual or include changes in the specifications

of the product described within it at any time without notice and without obligation to notify any

person of such revision or changes. The information contained in this manual is provided for

general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

Intel, Pentium are registered trademarks of Intel Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used in this manual are ascribed to their respective

owners and acknowledged.

M829

Statement of Shuttle Mainboard via the EMI Test

Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/

CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI

C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-

trated as follows:

(A)Voltage:AC110V/60HZ &AC230V/50HZ

(B) Tested Product Information:

Product Name: PC Mainboard

Status: Sample

ModelName:AB60/R

S/N:N/A

CPU:

External Frequency: 100 MHz

IntelPentium4: 2.0/2.4/2.5/2.6GHz

External Frequency: 133 MHz

IntelPentium4: 2.4/ 2.53/2.8/3.06GHz

External Frequency: 200 MHz

Intel Pentium4: 2.8/ 3.0/3.2GHz

Keyboard Port: one port with 6 pins

Mouse Port: one port with 6 pins

USB 2.0 Port: four ports with 4 pins respectively

1394 Port: three port with 6 pins

VGA Port: one port with 15 pins

RJ45 Port: one port with 8 pins

S-Port Connector: one port for each

MIDI Port: two ports for each

Earphone-Out & Line-In & Mic-In Ports: one port for each

DDR Memory: Apacer 256 MB *2

All CPUs have completely been tested, and values offered by the worst EMI combination of

CPU external frequency are listed as follows:

Test Mode External Frequency CPU Case Open/Closed

1 200MHz P4 3.2 GHz Closed

2 200MHz P4 3.2 GHz Open

3 133MHz P4 3.06 GHz Closed

4 133MHz P4 3.06 GHz Open

5 100MHz P4 2.6 GHz Closed

6 100MHz P4 2.6 GHz Open

Remedy:N/A

EMIInterference:

Crystal:32.768KHz(X1)/14.318MHz(X2)/24.576(X3)/25.0MHz(X4)/

25.0MHz(X5)

Clock Generator: CLK1

(D) Supported Host Peripherals:

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI orAGP door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Host Peripheral Product Name Model Name S/N FCC ID

#1 Case KF45A N/A

#2 Power Supply (300W) ENP-0730 (ATX12V) 1000002885

#3 IBM HDD (30.7GB) 91024UB YKFY7981 3892I168

#4 MITSUMI FDD D353M

#5 SONY VCD Player CDU4811 3892A291

#6 AGP Card Winfast Geforce 2 MX 3892C520

#7 Power Cable Detachable and Shielded

- 1 -

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6

EXPERIENCEDDIY USER ........................................................................ 6

SYSTEMINTEGRATOR............................................................................... 6

1.2 ITEM CHECKLIST....................................................................................... 7

2 FEATURES ........................................................................................ 9

2.1 SPECIFICATIONS ....................................................................................... 9

3 HARDWARE INSTALLATION..........................................................12

3.1 STEP BY STEP INSTALLATION............................................................... 12

Accessories of AB60/R......................................................................... 12

STEP1 Installthe CPU .......................................................................... 13

STEP 2 Set Jumpers............................................................................. 14

STEP3 InstallDDRSDRAM SystemMemory........................................ 14

STEP4 InstallPeripheralsin SystemCase............................................ 15

STEP5 Mountthe Mainboard onthe ComputerChassis........................ 16

STEP6 ConnectFrontPanelSwitches/LEDs/Speaker/USB.................. 17

STEP 7 Connect IDE/ Floppy Disk/ SerialATADrives............................ 18

STEP8Connect OtherInternalPeripherals............................................ 19

STEP9 ConnectthePower Supply........................................................ 20

STEP10 InstallAdd-on Cards inExpansion Slots .................................. 20

STEP11 Connect External Peripherals toBack Panel .......................... 21

STEP 12 First Time System Boot Up ..................................................... 22

STEP13 InstallDrivers & SoftwareComponents ................................... 23

TABLE OF CONTENTS

- 2 -

3.2 JUMPER SETTINGS ................................................................................. 24

JUMPERS& CONNECTORSGUIDE.................................................... 25

Jumpers

Clear CMOS Setting (JP2) ................................................................... 27

DisabledIEEE1394 Setting (JP8)(AB60R Only) .................................... 28

Disabled RAID Setting(JP9)(AB60R Only) ........................................... 28

Back-Panel Connectors

PS/2Keyboard & PS/2 Mouse Connectors............................................ 29

ParallelPortConnector.......................................................................... 29

COM1/2PortConnectors ...................................................................... 29

USB1/USB2Port Connectors ................................................................ 29

10/100/1000base-T LANPort Connector.............................................. 30

USB3/USB4Port Connectors ................................................................ 30

Line-Out PortConnector ....................................................................... 30

Line-InPortConnector ........................................................................... 30

Mic-InPortConnector ............................................................................ 30

Front-Panel Connectors

HDD LED Connector (HLED) ................................................................ 31

HardwareReset Connector (RST)......................................................... 31

EPMIConnector(EPMI)......................................................................... 32

SpeakerConnector (SPEAKER) ........................................................... 32

GreenLED Connector (GLED) .............................................................. 33

ATXPower On/OffSwitch Connector(PWR ON).................................... 33

PowerLED Connector (PWRLED) ........................................................ 34

Internal Peripherals Connectors

EnhancedIDE andFloppy Connectors................................................... 34

Other Connectors

ATXPower Supply Connectors (ATX1&ATX2)....................................... 35

- 3 -

CoolingFan Connectors for CPU(FAN1),AGP (FAN2), System(FAN3) 36

IRHeader(J1) ....................................................................................... 36

CD-IN Connectors(CN4/CN5) ............................................................... 37

Audio Auxiliary_INConnector(CN6)...................................................... 37

Center/Bass_Out Header(CN2) ........................................................... 38

FrontPanelAudio Header (JP3) ............................................................ 38

SPDIFExt Header (JP4) ....................................................................... 38

ExtendedUSB Connector(USB3/USB4) ............................................... 39

IEEE1394Connector (JP5/JP6/JP7)(AB60R Only)................................ 39

WOLConnector(WOL1)........................................................................ 40

3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 40

1.INSTALLMEMORY ............................................................................ 40

2.UPGRADEMEMORY ........................................................................ 41

4 SOFTWARE UTILITY ......................................................................42

4.1 Mainboard CD Overview ......................................................................... 42

4.2 Install Mainboard Software ..................................................................... 42

4.2.A InstallIntelChipsetDriver ................................................................. 44

4.2.B InstallUSB 2.0Driver ....................................................................... 44

4.2.C InstallAudio Driver........................................................................... 45

4.2.D InstallIntelLANDriver ...................................................................... 45

4.2.E InstallRAID Driver(AB60R Only)...................................................... 46

4.2.F InstallSiICfgInstallationUtility (AB60ROnly)..................................... 46

4.3 View the User's Manual........................................................................... 47

5 BIOS SETUP ................................................................................... 48

5.1 ENTER BIOS ............................................................................................. 48

5.2 THE MAIN MENU ...................................................................................... 49

STANDARD CMOS FEATURES ............................................................... 51

- 4 -

ADVANCED BIOS FEATURES ................................................................. 54

ADVANCED CHIPSET FEATURES .......................................................... 58

INTEGRATEDPERIPHERALS .................................................................. 61

POWERMANAGEMENT SETUP.............................................................. 67

PNP/PCICONFIGURATION....................................................................... 71

PCHEALTH STATUS ................................................................................ 73

FREQUENCY/VOLTAGECONTROL ......................................................... 74

LOAD FAIL-SAFE DEFAULTS .................................................................. 75

LOADOPTIMIZEDDEFAULTS ................................................................. 75

SETSUPERVISOR/ USER PASSWORD.................................................. 76

SAVE & EXIT SETUP................................................................................ 77

EXITWITHOUTSAVING ............................................................................ 77

- 5 -

Quick Reference

Hardware Installation >> Step-by-Step ................................................Page 12

Jumper Settings >> A Closer Look.......................................................Page 24

Drivers/Software Utilities >> How to Install .........................................Page 42

BIOS Setup >> How to Configure.........................................................Page 48

About This Manual

For First-Time DIY System Builder.........................................................Page 6

For Experienced DIY User ......................................................................Page 6

For System Integrator .............................................................................Page 6

WHAT'S IN THE MANUAL

- 6 -

1.1 To Different Users

First-Time DIY System Builder

Welcome to the DIY world! Building your own computer system is not as diffi-

cult as you may think. To make your first computer DIY experience successful,

right from the start, we have designed the 3.1 Hardware Installation section

in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-

lation, we also suggest you to read the whole manual carefully to gain a com-

plete understanding of your new Shuttle AB60/R mainboard.

Experienced DIY User

Congratulate on your purchase of the Shuttle AB60/R mainboard. You will find

that installing your new Shuttle AB60/R mainboard is just easy. Bundled with

an array of onboard functions, the highly-integrated AB60/R mainboard pro-

vides you with a total solution to build the most stable and reliable system.

Refer to sections 3.2 Jumper Settings and Chapter 4 Drivers/Software

Utilities to find out how to get the best out of your new mainboard. Chapter 5

BIOS Setup also contains the relevant information on how to tune up your

system to achieve higher performance.

System Integrator

You have wisely chosen Shuttle AB60/R to construct your system. Shuttle

AB60/R incorporates all the state-of-the-art technology of the 865PE chipset

from Intel. It integrates the most advanced functions you can find to date in a

compact ATX board.

1INTRODUCTION

Table of contents

Other Shuttle Motherboard manuals

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual