Shuttle AN51R User manual
AN51R
Socket 754
AMDAthlon TM 64 Processor
Based DDR MAINBOARD
User's Manual
MA10
Shuttle®AN51R
Socket 754
AMDAthlon TM 64 Processor
Based DDR Mainboard
Copyright
Copyright©2004 by Shuttle®Inc.AllRightsReserved.
This publication, including all photos, illustrations, and software, is protected under interna-
tional copyright laws, with all rights reserved. Reproducing any of the material contained
herein is prohibited without the consent of the publisher.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
NVIDIAisaregisteredtrademarkof NVIDIA Corporation.
AMD,Athlon TM 64is registered trademarks ofAMDCorporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark ofAward Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
Thermalissue ishighly essentialforprocessors withaspeed of600MHzand above.
Hence,we recommendyou touse theCPU fanqualified byAMDor motherboard
manufacturer.Meanwhile,please makesureCPU andfanare securelyfastenedwell.
Otherwise,improperfan installationnotonly getssystemunstable butalsocould
damageboth CPUand motherboardbecause insufficient thermal dissipation.
Ifyou wouldlike to know more aboutthermal topicplease see AMD website for
detailedthermalrequirement throughtheaddress:
http://www.amd.com
WARNING
Ifyou’ve changed your CPU oroverclocked your system,the system mayfail toboot up,
even with a Clear CMOS jumper physically resetted. The reason is that NVIDIA’s new
nForce2 chipset introduces a way to reset a Clear CMOS jumper without removing a
chassis.Please followthe stepslisted below:
1. Turnoffyour computerandunplug thepower cable.Reconnectit after30seconds;
2. Press<Insert>andthenpressyourcomputer’s start button.Continueholding<Insert>
untilthesystem beginsthePOST (Power-OnSelfTest);
3. Immediatelypress<Del> toenter theBIOS;
4. Select‘Load OptimizedDefaults’ to return your systemto abootable condition;then
select ‘SAVE to CMOS and EXIT’;
5. Rebootyoursystem.
Moreover, if your system fails to boot up after you reset the CPU FSB, select “SAVE to
CMOS and EXIT” in the BIOS.After the system restarts, there is on screen a message
warningyounotto resetorturnoff your computer:
Warning! New setting is updating now
Do not Reset or Shutdown the system
Yoursystem worksafter theBIOS isupdated.
NOTICE
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:AN51R
S/N:N/A
CPU:
External Frequency: 200 MHz 3000+/ 3200+
Mouse Port: one port with 6 pins
Keyboard Port: one port with 6 pins
Parallel Port: one port with 25 pins
Serial Port: one ports with 9 pins respectively
1394 Port: one port with 6 pins
Mic-In & Center/Bass & Line-In & Rear-Out & SPDIF-Out & Front-Out Ports : one port
for each
LAN Port: one port with 8 pins (10Mbps/ 100Mbps)
USB Port: four ports with 4 pins respectively
DIMM Memory (optional): DDR 400 256 MB*2
Power Cable: Detachable and Shielded (with a GND pin)
Monitor:CRT
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X1)/25.00 KHz(X9)/32.768 MHz(X2)/24.576MHz(X3)/
25.000MHz(X6)/24.576 MHz(X7)
ClockGenerator: Zu1
Test Mode
1External Frequency
200 MHz CPU
3200+
(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name
#1 Case AN51R
#2 Power Supply (300W) ENP-0730
#3 Maxtor HDD (40GB) D740X-6L
#4 CODE DVD Player DVD-116
Important Safety Information
SAFETY INSTRUCTIONS
1. Pleasereadthesesafety instructionscarefully.
2. Pleasekeep this User‘sManual for later reference.
3. Pleasedisconnect this equipmentfromAC outlet before cleaning.Don‘t use liquid
orsprayed detergent forcleaning.
4. Forpluggableequipment, thesocket-outlet shallbe installednearthe equipment
andshall be easilyaccessible.
5. Pleasekeepthis equipmentfromhumidity.
6. Laythisequipment onareliable surfacewheninstall.A drop orfall couldcause injury.
7. Donot leavethis equipment in an environmentunconditioned, itmay damagethe
equipment.
8. Theopenings onthe enclosure are for airconvection henceProtect theequipment
fromoverheating.DO NOTCOVERTHE OPENINGS.
9. Makesure the voltageof thepower sourcewhen connect theequipment tothe
poweroutlet.
10. Placethepower cordsucha waythat people cannot steponit. Donotplace anything
overthepowercord. Thepowercordmust beratedforthe productandforthe voltage
andcurrent marked on the product’s electrical ratings label. Thevoltage and current
ratingof thecord should be greater thanthe voltageand currentrating markedon the
product.
11. Allcautions andwarnings on the equipment shouldbe noted.
12. Iftheequipmentis not useforlongtime,disconnecttheequipmentfrommainstoavoid
beingdamagedby transientover-voltage.
13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.
14. CAUTION:The computeris provided witha battery-poweredreal-time clockcircuit.
Thereis adanger ofexplosion if battery is incorrectlyreplaced.
Replaceonlywith sameorequivalent typerecommendedby themanufacture.
Discardused batteriesaccording to themanufacturer’s instructions.
15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-
ATESAFETY STANDARDSINCLUDING IEC 60825.
CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
CLASS 1 LASER PRODUCT
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 4
Quick Reference............................................................................................... 4
About This Manual ........................................................................................... 4
1 INTRODUCTION................................................................................ 5
1.1 TO DIFFERENT USERS ............................................................................. 5
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 5
EXPERIENCEDDIYUSER ......................................................................... 5
SYSTEMINTEGRATOR............................................................................... 5
1.2 ITEM CHECKLIST: ...................................................................................... 6
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION..........................................................12
3.1 STEP-BY-STEP INSTALLATION............................................................... 12
STEP1 Install theCPU .............................................................................. 13
STEP 2 Set Jumpers ................................................................................. 14
STEP3 Install DDR SDRAM SystemMemory............................................ 14
STEP4Install InternalPeripherals inSystemCase .................................... 15
STEP5 Mount theMainboard on theComputer Chassis............................ 16
STEP6 ConnectFront Panel LEDs/Switches/Speaker/USBs .................... 17
STEP 7 Connect IDE ,Floppy Disk Drives................................................. 18
STEP8Connect OtherInternalPeripherals................................................ 19
STEP9 Connect thePower Supplies......................................................... 21
STEP10 InstallAdd-on Cardsin Expansion Slots ...................................... 21
STEP11 Connect External Peripherals to Back Panel ............................... 22
STEP12 System BootUp For the First-Time ............................................. 23
STEP13 InstallDrivers &Software Components ....................................... 24
3.2 JUMPER SETTINGS ................................................................................. 25
JUMPERS& CONNECTORSGUIDE........................................................ 26
Jumpers
Clear CMOS Setting (JP18)...................................................................... 28
Giga LAN Setting (JP21) .......................................................................... 29
1394 Setting (JP22).................................................................................. 29
- 2 -
Back Panel Connectors
PS/2Mouse & PS/2 Keyboard Port Connectors ........................................ 30
ParallelPortConnector .............................................................................. 30
COM1Port Connector ............................................................................... 30
ClearCMOS Button ................................................................................... 30
SPDIF-In Connector.................................................................................. 30
IEEE1394 Connector ................................................................................ 31
USB PortConnectors ............................................................................... 31
GigabitLAN Port Connector....................................................................... 31
Mic-InPortConnector ................................................................................ 31
Center/BassPortConnector ...................................................................... 31
Line-InPortConnector ............................................................................... 32
Rear-OutPortConnector ........................................................................... 32
SPDIF-OutPortConnector......................................................................... 32
Front-OutPortConnector ........................................................................... 32
Front Panel Connectors
HDD LED Connector (HLED) .................................................................... 33
GreenLED Connector (GLED) .................................................................. 33
HardwareResetConnector (RST).............................................................. 34
ATXPowerOn/Off SwitchConnector(PWON) ........................................... 34
EPMIConnector(EPMI)............................................................................. 35
Power LED Connector (PLED) .................................................................. 35
SpeakerConnector (SPEAKER) ............................................................... 35
Internal Peripheral Connectors
EnhancedIDE andFloppy Connectors(IDE1/IDE2 &FLP1) ...................... 36
SerialATA Connectors (SATA #1~4) .......................................................... 36
Other Connectors
ATXPower Supply Connectors(ATX1/CN8) .............................................. 37
CPUand SystemFan Connectors(FAN1/2/3)............................................ 38
IRHeader(JP8)......................................................................................... 38
AudioCD_IN Connectors (CN4/CN5) ........................................................ 39
AudioAUX_INConnector(CN6) ................................................................ 39
ExtendedUSB Headers(JP7/JP20) .......................................................... 40
FrontPanelAudioHeader (JP11)............................................................... 40
- 3 -
IEEE1394 Connector (JP15)..................................................................... 41
PowerButton(SW1) .................................................................................. 41
ResetButton(SW2) ................................................................................... 41
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 42
INSTALLMEMORY .................................................................................... 42
UPGRADEMEMORY................................................................................ 43
4 SOFTWARE UTILITY ......................................................................44
4.1 Mainboard CD Overview ......................................................................... 44
4.2 Install mainboard software Driver .......................................................... 44
4.2.A Install DirectX9 Utility Driver ......................................................... 45
4.2.B Install nVIDIA Chipset Driver ........................................................ 45
4.2.C Install Broadcom Giga LAN Driver............................................... 46
4.2.D Install nVIDIA USB2.0 Driver ........................................................ 46
4.3A View the User's Manual......................................................................... 47
4.3B View the NVIDIA RAID User's Guide .................................................... 47
5 BIOS SETUP ................................................................................... 48
5.1 ENTER BIOS ............................................................................................. 48
5.2 THE MAIN MENU ...................................................................................... 49
STANDARD CMOS FEATURES ............................................................... 51
ADVANCED BIOS FEATURES................................................................. 53
ADVANCED CHIPSET FEATURES .......................................................... 56
INTEGRATEDPERIPHERALS .................................................................. 59
POWERMANAGEMENT SETUP.............................................................. 62
PNP/PCICONFIGURATIONS .................................................................... 64
PCHEALTH STATUS................................................................................ 65
RATIO/VOLTAGECONTROL..................................................................... 65
LOAD FAIL-SAFE DEFAULTS .................................................................. 66
LOADOPTIMIZEDDEFAULTS ................................................................. 66
SETSUPERVISOR/USER PASSWORD................................................... 66
SAVE & EXIT SETUP................................................................................ 67
EXITWITHOUTSAVING ............................................................................ 67
Appendix A. Update Memory Configurations ............................................... 68
Table of contents
Other Shuttle Motherboard manuals
Shuttle
Shuttle HOT-579 User manual
Shuttle
Shuttle MS52 User manual
Shuttle
Shuttle AB61 User manual
Shuttle
Shuttle AB48 User manual
Shuttle
Shuttle HOT-679 User manual
Shuttle
Shuttle FB65 User manual
Shuttle
Shuttle MB11 User manual
Shuttle
Shuttle AN50R User manual
Shuttle
Shuttle HOT-603 User manual
Shuttle
Shuttle AE23 User manual
Shuttle
Shuttle FB86 User manual
Shuttle
Shuttle ME21 User manual
Shuttle
Shuttle FT20 User manual
Shuttle
Shuttle FB61 User manual
Shuttle
Shuttle AB52 User manual
Shuttle
Shuttle FS58 User manual
Shuttle
Shuttle HOT-591 User manual
Shuttle
Shuttle HOT-675 User manual
Shuttle
Shuttle MS52P User manual
Shuttle
Shuttle Spacewalker MS50 User manual
