ST815 Stable Laser Source
4
ST815B, ST815C, ST815D Figure
1. 1310nm, 1550nm output adapter
2. The second output adapter:
ST815B: 1490nm output adapter
ST815C: 850nm, 1300nm output adapter
ST815D: 1625nm output adapter
3. LCD
4. Operate button
5. Charging socket
ST815 Stable Laser Source
5
5. Operation
1.
On/Off
Press "On" key 2 seconds to start the equipment,
LCD displays operating avelength, battery
voltage and modulation state. When you open the
ST815, it orks on 1310 nm avelength and
continuous light output state; press "off" key 2
seconds to close the equipment. The system
defaults auto-shutdo n, auto shutdo n logo is
displayed on the screen. Open and turn off the
automatic shutdo n function: Press "off" button on
the screen, auto-off mark disappear, hich
sho s the automatic shutdo n function is closed;
and then press "off" button, automatic shutdo n
logo is displayed on the screen at this time
has indicated that the automatic shutdo n feature
open. If there is no operation for 10 minutes, the
equipment ill automatically shutdo n.
2.
2.2.
2.
Wavelength switch function
Press " avelength" button, you can s itch
different avelengths, and LCD screen display the
different output avelength.
Note: If ou want to switch the 1310nm,
1550nm wavelength to 850nm, 1300nm
(ST815C) or 1490nm (ST815B) or 1625nm
(ST815D), do not forget to change the output
adapter.
3. Modulation output
Press the "Mode" button, you can achieve the
modulated light 270Hz, 1 kHz, 2 kHz continuous
light output, at the same time on the LCD screen
ill sho the corresponding modulation frequency
of the state.
