9.1.4
Pipe Lining 34
9.1.5
Pipe Roughness 34
9.2
Input of the Medium Parameters 34
9.2.1
Medium Temperature 34
9.3
TransducerSelection 34
9.4
Defining the Measuring Point Number 35
9.5
Defining the Number of Sound Paths 35
9.6
TransducerDistance 35
9.6.1
Fine Adjustment of the Transducer Distance 35
9.6.2
Consistency Check 36
9.6.3
Value of the Sound Speed 36
9.7
Start of the Measurement 36
9.8
Detection of the Flow Direction 37
9.9
Interruption of the Measurement 37
10 DISPLAYING THE MEASURED VALUES 38
10.1
Selection of the Physical Quantity and of the Unit of Measurement 38
10.2
Adjustment of the Display 38
10.3
Status Line 39
10.4
TransducerDistance 40
11 ADVANCED MEASURING FUNCTIONS 41
11.1
Command Execution during Measurement 41
11.2
Damping Factor 41
11.3
Totalizers 41
11.4
Upper Limit of the Flow Velocity 42
11.5
Cut-off Flow 43
11.6
Uncorrected Flow Velocity 43
11.7
Program Code 44
11.7.1
Defining a Program Code 44
11.7.2
Intervention in the Measurement 44
11.7.3
Deactivation of the Program Code 44
12 DATA LOGGER AND TRANSMISSION OF DATA 45
12.1
Data Logger 45
12.1.1
Activation/Deactivation of the Data Logger 45
12.1.2
Setting the Storage Rate 45
12.1.3
Settings of the Data Logger 45
12.1.4
Measurement with Activated Data Logger 47
12.1.5
Deleting the Measured Values 47
12.1.6
Available Data Logger Memory 47
12.2
Transmission of Data 48
12.2.1
Online Transmission of Data 48
12.2.3
Formatting of the Measurement Data 48
12.2.4
Transmission Parameters 49
12.2.5
Online Transmission of Data to a Terminal Program 49
12.2.6
Offline Transmission of Data to a Terminal Program 50
12.2.7
Offline Transmission of Data with the Program FluxData 50
12.2.8
Structure of the Data 52
13 SETTINGS 53
13.1
Time and Date 53
13.1.1
Time 53
13.1.2
Date 53
13.2
Dialogs and Menus 53
13.2.1
Pipe Circumference 53
13.2.2
Measuring Point Number 54
13.2.3
Transducer Distance 54
13.2.4
Error Value Delay 54
13.2.5
Alarm State Indication 54
13.2.6
Units of Measurement 54
13.2.7
Setting for the Medium Pressure 55
13.3
Measurement Settings 55
13.4
Setting the Contrast 56
13.5
InstrumentInformation 56
