Rigol RP1001C User manual
Jun. 2013
RIGOL Technologies, Inc
RIGOL
RP1001C User’s Guide I
Guaranty and Declaration
Copyright
© 2012 RIGOL Technologies, Inc. All Rights Reserved.
Trademark Information
RIGOL is a registered trademark of RIGOL Technologies, Inc.
Publication Number
UGE16104-1110
Notices
RIGOL products are protected by patent law in and outside
of P.R.C.
RIGOL reserves the right to modify or change parts of or all
the specifications and pricing policies at company’s sole
decision.
Information in this publication replaces all previously
corresponding material.
RIGOL shall not be liable for losses caused by either
incidental or consequential in connection with the furnishing,
use or performance of this manual as well as any information
contained.
Any part of this document is forbidden to be copied or
photocopied or rearranged without prior written approval of
RIGOL.
Product Certification
RIGOL guarantees this product conforms to the national and
industrial standards in China as well as the ISO9001:2008
standard and the ISO14001:2004 standard. Other international
standard conformance certification is in progress.
Contact Us
If you have any problem or requirement when using our products,
please contact RIGOL Technologies, Inc. or your local distributors,
or visit: www.rigol.com.
RIGOL
General Safety Summary
Please review the following safety precautions carefully before
putting the instrument into operation so as to avoid any personal
injuries or damages to the instrument and any product connected to
it. To prevent potential hazards, please use the instrument only
specified by this manual.
Ground The Instrument.
The instrument is grounded through the Protective Earth lead of the
power cord. To avoid electric shock, it is essential to connect the
earth terminal of power cord to the Protective Earth terminal before
any inputs or outputs.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on
the instrument and check your manual for more information about
ratings before connecting.
Replace Fuse Properly
RIGOL
RP1001C User’s Guide III
Make sure that no overvoltage (such as voltage caused by
thunderbolt) this product. Otherwise, the operator might be exposed
to electric shock.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is
powered.
II RP1001C User’s Guide
Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected
by qualified service personnel before further operations. Any
maintenance, adjustment or replacement especially to circuits or
accessories must be performed by RIGOL authorized personnel.
Keep Well Ventilation.
Inadequate ventilation may cause increasing of temperature or
damages to the device. So please keep well ventilated and inspect
the intake and fan regularly.
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or
electric shock, please do not operate in a humid environment.
Do Not Operate in an Explosive Atmosphere.
In order to avoid damages to the device or personal injuries, it is
important to operate the device away from an explosive
atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in air, please keep
the surface of device clean and dry.
Electrostatic Prevention.
Operate in an electrostatic discharge protective area environment
to avoid damages induced by static discharges. Always ground
both the internal and external conductors of the cable to release
static before connecting.
RIGOL
Safety Terms and Symbols
Terms in this Manual. These terms may appear in this manual:
WARNING
Warning statements indicate the conditions or practices
that could result in injury or loss of life.
CAUTION
Caution statements indicate the conditions or practices that
could result in damage to this product or other property.
RIGOL
RP1001C User’s Guide V
Terms on the Product. These terms may appear on the Product:
DANGER
indicates an injury or hazard may immediately
happen.
WARNING
indicates an injury or hazard may be accessible
potentially.
CAUTION
indicates a potential damage to the instrument or
other property might occur.
Symbols on the Product. These symbols may appear on the
product:
Double Safety Protective Chassis Test Insulation Warning Earth
Ground Ground
Terminal
IV RP1001C User’s Guide
Contents
Guaranty and Declaration .................................................. I
General Safety Summary...................................................II
Safety Terms and Symbols ............................................... IV
RP1001C Overview ............................................................. 1
Basic Operation .................................................................. 1
Connection between the Current Probe and Oscilloscope ....... 1
Connection between the Current Probe and Digital Meter ......
4
Maintenance ....................................................................... 5
Battery ..............................................................................
5
To Install the Battery ..........................................................
5
AC Power Adapter ..............................................................
6
Cleaning ............................................................................
6
Preparation for shipment ....................................................
7
Specifications ..................................................................... 8
Electrical Characteristics .....................................................
8
Voltage and Current Ratings ................................................
9Physical Characteristics .....................................................
10
Environmental Characteristics ............................................
10
Certifications and Compliances .......................................... 10
Accessories ....................................................................... 12
Appendix ...........................................................................
13 Appendix 1 Gain versus Frequency at 1 A Peak (Typical) .....
13 Appendix 2 Maximum Current versus Frequency .................
14 Appendix 3 DC Signal Linearity in 10mV/A Range (Typical) ..
14
Appendix 4 Phase versus Frequency at 1 A Peak (Typical) ...
15
Table of contents
Other Rigol Measuring Instrument manuals
Rigol
Rigol DSA800E Series Operating instructions
Rigol
Rigol PLA2216 User manual
Rigol
Rigol DSA800 Series User manual
Rigol
Rigol RSA3000E Series User manual
Rigol
Rigol RPL1116 User manual
Rigol
Rigol DSA700 series User manual
Rigol
Rigol DSA1000A Series Operating instructions
Rigol
Rigol DM3068 User manual
Rigol
Rigol DSA815 User manual
Rigol
Rigol DM3058 User manual
Rigol
Rigol DS1102Z-E User manual
Rigol
Rigol RP1000D Series User manual
Rigol
Rigol PCA1030 User manual
Rigol
Rigol RSA3030-TG User manual
Rigol
Rigol DL3021 User manual
Rigol
Rigol DSA800 Series User manual
Rigol
Rigol RP1003C User manual
Rigol
Rigol PCA1500 User manual
Rigol
Rigol DSA1000 Series Administrator Guide
Rigol
Rigol DL3032 User manual
