Rigol DSA700 series User manual

RIGOL

User’s Guide

DSA700 Series

Spectrum Analyzer

Mar. 2017

RIGOL TECHNOLOGIES, INC.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

Safety Requirement

General Safety Summary

Please review the following safety precautions carefully before putting the

instrument into operation so as to avoid any personal injury or damage to the

instrument and any product connected to it. To prevent potential hazards, please

follow the instructions specified in this manual to use the instrument properly.

Use Proper Power Cord.

Only the exclusive power cord designed for the instrument and authorized for use

within the local country could be used.

Ground the Instrument.

The instrument is grounded through the Protective Earth lead of the power cord.

To avoid electric shock, connect the earth terminal of the power cord to the

Protective Earth terminal before connecting any input or output terminals.

Connect the Probe Correctly.

If a probe is used, the probe ground lead must be connected to earth ground. Do

not connect the ground lead to high voltage. Improper way of connection could

result in dangerous voltages being present on the connectors, controls or other

surfaces of the oscilloscope and probes, which will cause potential hazards for

operators.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and markers on the instrument

and check your manual for more information about ratings before connecting the

instrument.

Use Proper Overvoltage Protection.

Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach

the product. Otherwise, the operator might be exposed to the danger of an electric

shock.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

III

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Do Not Insert Objects Into the Air Outlet.

Do not insert objects into the air outlet, as doing so may cause damage to the

instrument.

Use Proper Fuse.

Please use the specified fuses.

Avoid Circuit or Wire Exposure.

Do not touch exposed junctions and components when the unit is powered on.

Do Not Operate With Suspected Failures.

If you suspect that any damage may occur to the instrument, have it inspected by

RIGOL authorized personnel before further operations. Any maintenance,

adjustment or replacement especially to circuits or accessories must be performed by

RIGOL authorized personnel.

Provide Adequate Ventilation.

Inadequate ventilation may cause an increase of temperature in the instrument,

which would cause damage to the instrument. So please keep the instrument well

ventilated and inspect the air outlet and the fan regularly.

Do Not Operate in Wet Conditions.

To avoid short circuit inside the instrument or electric shock, never operate the

instrument in a humid environment.

Do Not Operate in an Explosive Atmosphere.

To avoid personal injuries or damage to the instrument, never operate the

instrument in an explosive atmosphere.

Keep Instrument Surfaces Clean and Dry.

To avoid dust or moisture from affecting the performance of the instrument, keep

the surfaces of the instrument clean and dry.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

Prevent Electrostatic Impact.

Operate the instrument in an electrostatic discharge protective environment to

avoid damage induced by static discharges. Always ground both the internal and

external conductors of cables to release static before making connections.

Use the Battery Properly.

Do not expose the battery (if available) to high temperature or fire.

Keep it out of the reach of children. Improper change of a battery (lithium battery)

may cause an explosion. Use the RIGOL specified battery only.

Handle with Caution.

Please handle with care during transportation to avoid damage to keys, knobs,

interfaces, and other parts on the panels.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

Safety Notices and Symbols

Safety Notices in this Manual:

WARNING

Indicates a potentially hazardous situation or practice which, if not

avoided, will result in serious injury or death.

CAUTION

Indicates a potentially hazardous situation or practice which, if not

avoided, could result in damage to the product or loss of important data.

Safety Terms on the Product:

DANGER

It calls attention to an operation, if not correctly performed, could

result in injury or hazard immediately.

WARNING It calls attention to an operation, if not correctly performed, could

result in potential injury or hazard.

CAUTION It calls attention to an operation, if not correctly performed, could

result in damage to the product or other devices connected to the

product.

Safety Symbols on the Product:

Hazardous

Voltage

Safety

Warning

Protective

Earth

Terminal

Chassis

Ground

Test

Ground

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

Care and Cleaning

Care

Do not store or leave the instrument where it may be exposed to direct sunlight for

long periods of time.

Cleaning

Clean the instrument regularly according to its operating conditions.

1. Disconnect the instrument from all power sources.

2. Clean the external surfaces of the instrument with a soft cloth dampened with

mild detergent or water. When cleaning the LCD, take care to avoid scarifying

it.

CAUTION

To avoid damage to the instrument, do not expose it to caustic liquids.

WARNING

To avoid short-circuit resulting from moisture or personal injuries, ensure

that the instrument is completely dry before connecting it to the power

supply.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

Environmental Considerations

The following symbol indicates that this product complies with the WEEE Directive

2002/96/EC.

Product End-of-Life Handling

The equipment may contain substances that could be harmful to the environment or

human health. To avoid the release of such substances into the environment and

avoid harm to human health, we recommend you to recycle this product

appropriately to ensure that most materials are reused or recycled properly. Please

contact your local authorities for disposal or recycling information.

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

XII

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

XIII

DSA700 Series Overview

DSA700 series spectrum analyzers which are small, light and cost-effective, are

portable spectrum analyzers designed for starters. Configured with

easy-to-operate numeric keyboard, high-resolution color LCD display and various

remote communication interfaces, they can be widely used in various fields, such

as education, company research and development as well as industrial

manufacture.

Main features:

The highest frequency: 500 MHz/1 GHz

Displayed Average Noise Level (DANL): <-130 dBm (Typical)

Phase Noise: <-80 dBc/Hz @ 10 kHz offset (Typical)

Level Measurement Uncertainty: <1.5 dB

Minimum Resolution Bandwidth (RBW): 100 Hz

EMI Filter and Quasi-Peak Detector Kit (Option)

Standard with Preamplifier and AM/FM Demodulation Function

Various measurement functions (option)

8 inche (800×480 pixels) high-definition display with clear, vivid, and

easy-to-use graphical interface

Various interfaces such as LAN, USB Host, USB Device and GPIB (option)

Compact Size, Light Weight Design

www. .com information@itm.com1.800.561.8187

RIGOL

User’s Guide for DSA700 Series

XIV

Document Overview

Topics in this manual:

Chapter 1 Quick Start

This chapter introduces the front/rear panel and user interface as well as

announcements during first use of the analyzer.

Chapter 2 Front Panel Operation

This chapter gives detailed function descriptions of the front panel keys with their

associated menu keys.

Chapter 3 Remote Control

This chapter shows how to control the analyzer in remote mode.

Chapter 4 Troubleshooting&Message

This chapter lists the troubleshooting information and messages that may appear

during the use of the analyzer.

Chapter 5 Specifications

This chapter lists the specifications and general specifications of the analyzer.

Chapter 6 Appendix

This chapter lists the options and accessories that can be ordered along with your

analyzer as well as the service and support information.

www. .com information@itm.com1.800.561.8187

Other manuals for DSA700 series

This manual suits for next models

Table of contents

Other Rigol Measuring Instrument manuals

Rigol

Rigol RSA3000 Series Installation and operation manual

Rigol

Rigol DS6104 Administrator Guide

Rigol

Rigol RP1003C User manual

Rigol

Rigol MSO8000 Series User manual

Rigol

Rigol DSA800 Series User manual

Rigol

Rigol RSA5000 Series Installation and operation manual

Rigol

Rigol DM3058 User manual

Rigol

Rigol DS6000 Series Installation and operating instructions

Rigol

Rigol DS1202Z-E User manual

Rigol

Rigol DP821A User manual

Rigol

Rigol PLA2216 User manual

Rigol

Rigol RP1000D Series User manual

Rigol

Rigol DSA800 Series User manual

Rigol

Rigol RP1002C User manual

Rigol

Rigol DSA1000 Series User manual

Rigol

Rigol DSA1000 Series Installation and operation manual

Rigol

Rigol RSA3030 User manual

Rigol

Rigol DS Series Quick start guide

Rigol

Rigol DSG3030-IQ User manual

Rigol

Rigol PCA1030 User manual

Rigol

Rigol RSA3045 User manual

Rigol

Rigol DS1000CA series User manual

Rigol

Rigol RSA5065 User manual

Rigol

Rigol RPL1116 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual