PRECISION DIGITAL NOVA PD560 Series User manual

DIGITAL METER

NOVA PD560 Series

Instruction Manual

PD562 & PD568

PRECISION DIGITAL CORPORATION

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Disclaimer

The information contained in this document is subject to change without notice.

Precision Digital Corporation makes no representations or warranties with

respect to the contents hereof, and specifically disclaims any implied warranties

of merchantability or fitness for a particular purpose.

Registered Trademarks

MODBUS®is a registered trademark of Schneider Automation Inc. All other

trademarks mentioned in this document are the property of their respective

owners.

Options

00 = None

21 = 2 relays & 2 digital inputs

24 = 2 relays & RS-485

Main Control Output

A = 1 relay & 1 analog output

2-6RA-00PD56

Digital Meter

Size - DIN Cutout

2 = 1/8 DIN (H)

8 = 1/4 DIN

Power

6 = 100-240 VAC

Display

R = Red LED

Nova PD560 Series Model Number Guide

Visit our Web Site

http://www.predig.com

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1. Safety Guide and Specifications 5

2. Front Panel Buttons and LED Indicators 10

5. Parameter Setup

5.1 Input Group (G.IN) 13

5.2 Control Group (G.CTL) 17

5.5 Communication Group (G.COM) 23

3. Parameter Map

6. Error Display and Correction 25

7. Installation 26

7.1 Dimensions and Panel Cutouts

7.2 Panel Mounting 28

7.3 Power Cable Specifications 29

7.4 Terminal Specifications 29

7.5 Terminal Assignment, Connections, and Ratings 30

4. Operation Flow Chart 12

5.3 Alarm Group (G.ALM) 19

5.4 Retransmission Group (G.RET) 22

Table of Contents

1.1 Specifications 7

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

7.7 Signal Input Connection

7.8 Retransmission Output Connection (RET) 33

7.9 Relay Output Connection (RELAY) 33

7.11 Use of an External Relay 34

7.12 Communication Wiring (RS-485) 35

7.6 Grounding and Power Cable Connection 32

Table 1: Universal Input Selection 13

Table 2: DI Operation 17

Fig 2: Bias Formula Calculation 15

Fig 3: Alarm Operation 20

Fig 1: Temperature Bias 15

7.10 Digital Input Connection (DI) 34

Table of D-Registers 36

Table 3: Alarm Selection 20

Appendix

Tables and Figures

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1. Safety Guide and Specifications

Precautions Regarding This Instruction Manual

(1)This manual must be kept in the possession of the end user and in a suitable place for the operator to

study and to check the functions of the product.

(2)The installer and operator should carefully study and understand howto operate this productbefore use.

(3)This manual describes the functions of the product. Precision Digital Corporation does not guarantee

that the functions will suit a particular purpose.

(4)The contents of this manual have been reviewed for accuracy and correctness. However, should any

errors or omissions come to the attention of the user, contact technical support as listed on the backof this

manual

CAUTION

Safety Procedures and Unauthorized Modification Warning

(1)In order to protect this product and the system controlled by it against damage and ensure its safe use,

make certain that all of the safety instructions and precautions in this manual are strictly adhered to.

(2)Precision Digital Corporation does not guarantee safetyif the productsare nothandled in accordance

with this instruction manual.

(3) If separate protection or safety circuits are to be installed in the system which is controlled by this product,

ensure that such circuits are installed external to this product.

(4)Do not make modifications or additions internallyto the product. It maycausepersonal injury to the user or

damage to the product.

(5)Contact technical support as listed on the back of the manual for warranty and repair issues.

(6)Exposure to excessive moisture, electrical overloads, or mechanical vibration may damage the product.

CAUTION

Limited Liability

Precision Digital Corporation assumes no liability to any party for any loss or damage, direct or indirect,

caused by theuse of or any unpredictable defect of the product.

CAUTION

The following safety symbols are used in this manual

(1) This symbol notifies the user of specific information relating to the safe operation of the controller.

Information noted with this symbol must be observed to protect the user from injuryand to prevent damage

to the product.

(A) For User: Be aware of this markinginthe manual and refer to the explanation in the manual to

prevent injury and damage.

(2) For Installer: Study the warnings marked to prevent injuryand damage.

(2) Functional earth terminal: This symbol indicates that the terminal must be connected to ground.

(3) This symbol indicates additional information on the features of the product.

(4) This symbol directs the reader to further information on the current topic.

NOTE

CAUTION

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

CAUTION

Controller Mounting Precautions

Keep the input circuit wiring as far as possible away from power and ground circuits.

Keep the units in 10 to 50ºC (50 to 110ºF) with 20% to 90% relative humidity (RH).

The controller may need a warm up period to return to operatingtemperature ranges when below 10ºC.

To prevent electric shock, be sure to turn off the power source and circuit breaker before wiring.

The power requirements are 100 to 240 VAC, 50/60 Hz, 10 VA max. Do not switch power

supplies without first disconnecting the power supply.

Follow the operating procedures and precautionsin the manual to avoid fire, shock, damage to the unit,

or injury. Follow the operations and mounting directions indicated in thismanual.

Always create a ground connection where indicated, however do not ground to gas pipes,

water pipes, lightening rods, or other potentially hazardous metal objects.

Do not apply power to the unit untilall connections have been made.

Do not cover the venting holes in the rear of the unit.

CAUTION

Operational Environment Precautions

(1)Only operate the controller when it is properly installed.

(2)When installing the controller, select a location where:

Rear terminals are protected from accidental contact.

Mechanical vibrations are minimal.

No corrosive gas is present.

Temperature fluctuation is minimal.

Temperature can be maintained between 10 and50ºC (50 and 110ºF) with 20 to 90% RH.

No direct heat radiation is present.

High levels of electromagnetic interference are not present

The unit is not exposed to water.

No flammable materials are present.

Dust particles are not present in the air.

Exposure to ultraviolet rays is minimal.

Openings on the rear of the controller are not blocked.

(3)This unit is suitable for installation in an enviornment classified as Pollution Degree 2.

(4)This unit is designated as Installation Category II.

(5)If the equipment is used in a manner not specified bythe manufacturer, the protection provided by

the equipment maybe impaired.

(6)A switch or circuit-breaker acting as the disconnect device shall be included in the application or the

installation.

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1.1 SPECIFICATIONS

General

DISPLAY Dual 4 digits, red LED, -1999 to 9999

DIN Sizes PV Display SP Display Weight

mm (inch) mm (inch) g (oz)

1/8 19.8 (0.78) 11.5 (0.45) 306 (10.6)

1/4 20.5 (0.81) 11.0 (0.43) 389 (13.7)

FRONTPANEL 1/8 DIN: IP65; 1/4 DIN: IP55

SAMPLINGTIME 250 ms

OVERRANGE Over range PV reads ovR, under range PV reads -ovR

PROGRAMMING Four front panel buttons, Modbus

METHODS

NOISEFILTER Programmable from 1 to 120

CALIBRATION All ranges are calibrated at the factory

MAX/MIN Max/min readings reached by the process are stored until

DISPLAY reset by the user or until power to the meter is turned off.

PASSWORD Programmable password restricts modification of

programmed settings

POWER 100-240 VAC, 50/60 HZ, 10 Watts

FUSE Required fuse: UL Recognized, 1 A, 250 V, slow blow

ISOLATION 2300 V input-to-output-to-power line;

4 kV relay output-to-input/output/power line

ENVIRONMENTAL Operating temperature range: 10ºC to 50ºC (50ºF to 110ºF)

Relative humidity: 20 to 90% non-condensing

MOUNTING 1/8 or 1/4 DIN size cutout required

Two panel mounting bracket assemblies provided

WARRANTY Three years parts and labor

EXTENDED Extended parts and labor warranties are available at time of

WARRANTY ordering

Retransmitting Output

OUTPUTRANGE Retransmitting: 4 to 20 mA (600 Ωmaximum)

SCALING RANGE Any display range (see range for the input selected)

ACCURACY +0.1% of full scale

Except where noted all specifications apply to operation at 23ºC.

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

K1 -200 to 1370 -300 to 2500

K2 -199.9 to 999.9 0 to 2300 > 0°C : ±0.1% FS ±1 digit

J -199.9 to 999.9 -300 to 2300 < 0°C : ±0.2% FS ±1 digit

T -199.9 to 400.0 -300 to 750

B 0 to 1800 32 to 3300 > 400°C : ±0.15% FS ±1 digit

< 400°C : ±5% FS ±1 digit

R 0 to 1700 32 to 3100 ±0.15% FS ±1 digit

Thermocouple S 0 to1700 32 to 3100

E -199.9 to 999.9 -300 to1800 > 0°C : ±0.1% FS ±1 digit

L -199.9 to 900.0 -300 to1600 < 0°C : ±0.2% FS ±1 digit

U -199.9 to 400.0 -300 to 750

N -200 to 1300 -300 to 2400 > 0°C : ±0.1% FS ±1 digit

< 0°C : ±0.25% FS ±1 digit

W 0 to 2300 32 to 4200 ±0.2% FS ±1 digit

Platinel II 0 to 1390 32 to 2500 ±0.1% FS ±1 digit

PtA -199.9 to 850.0 -300 to 1560 ±0.1% FS ±1 digit**

PtB -199.9 to 500.0 -199.9 to 999.9

RTD PtC -19.99 to 99.99 -4.0 to 212.0 ±0.2% FS ±1 digit

JPtA -199.9 to 500.0 -199.9 to 999.9 ±0.1% FS ±1 digit**

JPtB -150.0 to 150.0 -199.9 to 300.0

0.4 to 2.0 V ±0.1% FS ±1 digit

1 to 5 V

Process 0to10V

-10 to 20 mV

0 to 100 mV

0.400 to 2.000

1.000 to 5.000

0.00 to 10.00

-10.00 to 20.00

0.0 to 100.0

Temp Temp

Range (ºC) Range (ºF) Accuracy*

Input Type

UNIVERSAL INPUT TYPE AND ACCURACY

*Performance within recommended operating conditions (10 to 50°C, 20 to 90% RH)

**For a range scale of 0 to 100°C: +0.3°C +1 digit, and for a range scale of -100 to 100°C: +0.5°C +1 digit

Process and Temperature Inputs

TEMPERATUREDRIFT Refer to accuracy specifications below

DECIMALPOINT Up to three decimal places for process inputs:

9.999, 99.99, 999.9, or 9999

REAR JUNCTION Automatic or off settings for temperature inputs. No user

COMPENSATION calibration required.

OFFSETADJUSTMENT Four programmable input bias zones

SENSORBREAK Open sensor indicated by PV display flashing S.OPN.

DETECTION Up or down scale, user selectable; alarm relays will follow

the up or down scale selection.

TRANSMITTER 14 to 18 VDC @ 20 mA; available at terminals OUT2 or

SUPPLY OUT3, instead of a retransmitting analog output

Display range can be scaled between -1999 and 9999.

4 to 20 mA Input

To accept a 4 to 20 mA signal, select 0.4 to 2.0 VDC input

and connect a 100 Ωresistor across the input terminals.

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Relay Outputs

RATINGS Alarm1: 250 VAC @ 3 A or 30 VDC @ 3 A (resisitive load)

Alarm2, 3: 250 VAC @ 1 A or 30 VDC @ 1 A (resistive load)

ELECTRICALNOISE A suppressor (snubber) should be connected to each

SUPPRESSION relay contact switching inductive loads, to prevent

disruption to the microprocessor's operation.

Recommended suppressor value: 0.1 μF/470 Ω,

250 VAC (PDX6901)

DEADBAND For alarm operations, 0-100% of full scale, user selectable

HIGHORLOW User may program each relay for high or low trip point

ALARM

TIME DELAY 0 to 99 minutes 59 seconds alarm trip delay for each alarm

FAIL-SAFE Programmable

OPERATION Independent for each alarm relay

AUTOINITIALIZATION When power is applied to the meter, alarm relays will

reflect the state of the input to the meter except standby

alarms.

Digital Inputs

CONFIGURATION Two contacts, two operating modes

CONTACTS Normally open switches (external excitation note required)

or open collector transistor

OPEN CIRCUIT Approximately 5 VDC

VOLTAGE

LOGIC LEVELS LO = 0 to 0.8 VDC, HI = 4.7 to 28 VDC

OPERATIONMODES Mode 1: Record and reset maximum and minimum display

values simultaneously. Mode 2: Record and reset maximum

and minimum display values independently.

Serial Communications

PROTOCOLS Modbus (ASCII, RTU), PC software

UNITADDRESS 1 to 99 (Max 31 units connected)

BAUD RATE 600, 1200, 2400, 4800, 9600, 19200 bps, user selectable

RESPONSETIME 0 to 100 ms delay response time

10 ms increments user selectable

DATA 7 or 8 bit user selectable

PARITY None, even, or odd

Approvals

ULRECOGNIZED USA and Canada

Process Control Equipment

UL FILE NUMBER E244207

CE COMPLIANT

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

2. Front Panel Buttons and LED Indicators

KEY Function

Pressing SET/ENT key for at least 3 seconds switches between the operating displayand

the parameter setting display. This key is used to verifyand bypass parameter settings

when in the parametergroup display.

Used to move to the next digit when setting parameters.

S/ T

(UP/DOWN)

W(SHIFT)

SET/ENT

(ENTER)

LED Function

ALM1, 2, 3 LEDs turn on when the corresponding alarm relays are energized.

Control Keys

LED Display

Used to change the value of digits when setting parameters.

Used to move between parameter groups.

PD560 Series Nova Digital Process and Temperature Meter Instruction Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

This manual suits for next models

Table of contents

Other PRECISION DIGITAL Measuring Instrument manuals

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-7000 User manual

PRECISION DIGITAL

PRECISION DIGITAL pd663 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD685 User manual

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6200 User manual

PRECISION DIGITAL

PRECISION DIGITAL vantageview Safe Touch PD6700 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD677 User manual

PRECISION DIGITAL

PRECISION DIGITAL Sabre Series User manual

PRECISION DIGITAL

PRECISION DIGITAL ProtEx PD6820 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD765-6R0-00 User manual

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-7000 Series User manual

PRECISION DIGITAL

PRECISION DIGITAL pd663 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD213 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD661 User manual

PRECISION DIGITAL

PRECISION DIGITAL Javelin D PD644 User manual

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 User manual

PRECISION DIGITAL

PRECISION DIGITAL Sabre Series User manual

PRECISION DIGITAL

PRECISION DIGITAL PD655 User manual

PRECISION DIGITAL

PRECISION DIGITAL PROVU PD6001 User manual

PRECISION DIGITAL

PRECISION DIGITAL PD686 User manual

PRECISION DIGITAL

PRECISION DIGITAL DART PD602 User manual

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD683 User manual

PRECISION DIGITAL

PRECISION DIGITAL Javelin D PD644 User manual

PRECISION DIGITAL

PRECISION DIGITAL SABRE T PD743 User manual

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD6620 Series User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual