OHAUS TD52 User manual

Other manuals for TD52

7

Table of contents

Languages:

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual

TD52 Indicator

USB Host Option

(For Wireless Communication Option)

Instruction Manual

Interfaz de host USB

(Para conexiones inalá mbricas)

Manual de instrucciones

Interface hô te USB

(Pour connexion sans fil)

Manuel d’instruction

USB Host-Schnittstelle

(fü r drahtlose Verbindung)

Bedienungsanleitung

Interfaccia Host USB

(Per collegamento wireless)

Manuale di Istruzioni

USB 主设备选件

（用于无线连接）

使用说明书

USB 호스트 인터페이스 키트

(Wi-Fi 동글용입니다)

사용 설명서

ディフェンダー5000

USB ホストインターフェイス

（ワイヤレス接続用）

取扱説明書

Дополнительный интерфейс USB Host для весового терминала TD52

(для подключения адаптера беспроводной связи)

Руководство по эксплуатации

Manual_TD52_USB_V1

EN-1

INTRODUCTION

This Interface Kit is for use with Ohaus TD52 products and Wi-Fi dongle.

KIT CONTENTS

INTERFACE INSTALLATION

For TD52P version

1. Separate the indicator from the base by loosening load cell cable male connector.

Remove the Interface option cover.

Load cell cable male connector

Interface option cover

EN-2

2. Break off the rib of the interface option cover as shown.

3. Connect the 9 pin USB Host Board cable to the main board connector.

4. Install the USB Host board. Secure it with the 2 screws.

Cable

Main board

connector

Rib

EN-3

5. Connect the USB Host cable to the 9 Pin connector on the option board.

6. Plug the USB dongle in and put the interface option cover back on the terminal.

Screw

9 Pin

connector

USB Dongle

EN-4

For TD52XW version:

1. Remove the 6 sealing screws to open the rear housing. Remove the M25 hole plug as

shown.

2. Rotate the rear housing down away from the front housing as shown.

Screw

M25 hole plug

Load cell cable male

connector

EN-5

3. Connect 9 pin USB Host Board cable to the main board connector.

4. Install the USB host board. Secure it with 2 screws. (Note: Boss Post is 2 and 4.)

Cable

Main board connector

Boss Post 2, 4

EN-6

5. Connect the USB Host cable to the 9 Pin connector on the option board.

6. Put the rear housing back on the front housing. Fasten 6 screws with sealed washer

(Torque is 1.8N*m± 0.5). Plug the USB Dongle through M25 hole.

7. Fasten the USB dongle cover.

Screw

9 Pin connector

USB Dongle

USB dongle cover

EN-7

For TD52XW with reversed rear cover:

1. Remove the 6 sealing screws to open the rear housing. Remove the M25 hole plug as

shown.

2. Rotate the rear housing down away from the front housing as shown.

Screw

Load cell cable connector

M25 hole plug

EN-8

3. Connect the USB Host cable to the main board connector.

4. Install the USB host board. Secure it with 2 screws. (Note: Boss Post is 1, 3)

Cable

Main board

connector

Boss post 1, 3