Multitech MultiConnect microCell MTCM2-L4G1 User manual
MultiConnect®microCell Cellular Modem
MTCM2-L4G1 Quick Start
MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems
Quick Start Quick Start
Installing a SIM Card
To operate the device on a cellular network, you need a micro SIM card
(3FF) from your carrier.
To install the SIM card:
1. Locate the SIM card slot on the device. It is labeled SIM.
2. Push the SIM card into the slot with the contact side facing
up as shown. The SIM card locks into place.
Installing the Cellular Modem
Note: Install drivers before plugging the device into the USB port.
Refer to the Windows or Linux USB installation guide. For information,
refer to Documentation .
1. Connect antennas to the antenna connectors.
2. Connect the USB connector to your computer, either
directly or through a hub.
The USB connection powers the device and the POWER LED lights.
Regulatory Information
For additional regulatory information, see your device’s user guide or go
to your device’s page at http://www.multitech.com
MultiTech declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. The
declaration of conformity may be requested at
https://support.multitech.com.
MultiConnect®microCell Cellular Modem (MTCM2-L4G1)
Document Part Number: 82104400L
Copyright and Trademarks
This publication may not be reproduced, in whole or in part, without the
specific and express prior written permission signed by an executive
officer of Multi-Tech Systems, Inc. All rights reserved. Copyright © 2019
by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties,
whether express, implied or by estoppels, with respect to the content,
information, material and recommendations herein and specifically
disclaims any implied warranties of merchantability, fitness for any
particular purpose and non-infringement. Multi-Tech Systems, Inc.
reserves the right to revise this publication without obligation to notify any
person or organization of such revisions or changes.
MultiConnect, MultiTech and the MultiTech logo are registered
trademarks of Multi-Tech Systems, Inc. All other brand and product
names are trademarks or registered trademarks of their respective
companies.
MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems
Quick Start Quick Start Quick Start
Overview
The MultiConnect microCell (MTCM2) is a compact communications
device that provides cellular capabilities for fixed and mobile applications.
Package Contents
Your package includes the following (varies with model):
Device 1- MultiConnect microCell cellular modem
Antennas 2 - External antennas
Documents 1 - Quick Start, 1 - Warranty information
Documentation
The following documents are available at
https://www.multitech.com/brands/multiconnect-microcell. Select your
model to find the documents specific for that device.
Document Description Part Number
MultiConnect
microCell MTCM2-
L4G1 User Guide
Hardware, regulatory,
and getting started
information.
S000728
MultiConnect
microCell MTCM2-
L4G1 Quick Start
Steps for getting started.
Ships with the device
and is available online.
82104400L
Quectel EGxx AT
Commands Manual,
USB Installation
Guides, and other
related manuals
Multiple documents
listing AT Commands,
USB installation guides,
and other protocols used
to communicate with
your device. Provided in
a zip file.
N/A
Note: If this quick start has been updated, it will be available at that
location.
Dimensions
With antennas attached, the dimensions are as follows. Refer to the user
guide for more detailed dimensions.
Side Panels
Connectors
The device has the following connectors:
■USB 1 USB connector,
■SMA 2 female SMA connectors, labeled CELL and AUX
■SIM 1 micro-SIM slot, between the SMA connectors
LEDs
The MTCM2 has the following LEDs:
Note:
■Slow is 1 second on 1 second off
■Fast is 200 milliseconds on 200 milliseconds off
LED Status Description
Power On Device has power
Off Device does not have power
Link Status
(LS)
On Radio is not registered
Flash Slow Registered
Off Radio is turned off, in PSM mode,
receiving a firmware update, or SIM
is not inserted.
LTE On LTE
Flash Fast 3G
Flash Slow 2G
Off SIM not inserted or radio
technology unknown
SIM On Ready
Flash Slow Other
Off SIM not inserted
Signal
Strength
On Excellent
Flash Fast Good
Flash Slow Fair
Off No signal or SIM not inserted
This manual suits for next models
2
Other Multitech Modem manuals
Multitech
Multitech MultiConnect MTC-LAT1-B02 User manual
Multitech
Multitech MultiModem II MT5600BA-V.92 User manual
Multitech
Multitech MTSMC-G2 Installation instructions
Multitech
Multitech MMCModem GPRS (MTMMC-G) User manual
Multitech
Multitech MultiModem MT5634ZPX User manual
Multitech
Multitech MultiModem iCell User manual
Multitech
Multitech MultiModem CMDA MTCBA-C1X User manual
Multitech
Multitech MultiModem MT2834ZDX Series User manual
Multitech
Multitech MT1932ZDX User manual
Multitech
Multitech CC1600-11L User manual
Multitech
Multitech MultiModem MT5634ZBA-V.92 User manual
Multitech
Multitech MultiModem ZBA MT9234ZBA User manual
Multitech
Multitech MultiModem ISI ISI5634UPCI Series User manual
Multitech
Multitech MultiModem MT5600ZDX User manual
Multitech
Multitech MultiModem II User manual
Multitech
Multitech MultiConnect Cell MTC-H5 User manual
Multitech
Multitech MultiModem ISDN MT128ISA-UV User manual
Multitech
Multitech MultiMobile V.34/33.6K User manual
Multitech
Multitech MultiModem II BA-Series User manual
Multitech
Multitech MT9234ZBAUSBCDC User manual
